主页 音频 音频放大器 音频线路驱动器
主页
音频
音频放大器
音频线路驱动器

DRV135

正在供货

采用 SOIC-8 封装的音频平衡线路驱动器

立即订购
数据表

DRV135

正在供货
数据表 立即订购

产品详情

Voltage gain (V/V) 2 Iq (typ) (mA) 5.2 Load capacitance (µF) 1 Number of channels 1 THD + N at 1 kHz (%) 0.0005 Noise floor (RTO, 20-kHz BW) (dBu) -98 Slew rate (typ) (V/µs) 15 Small-signal bandwidth (typ) (Hz) 1500000 Supply voltage (max) (V) 36 Supply voltage (min) (V) 9 Operating temperature range (°C) -55 to 125 Rating Catalog
Voltage gain (V/V) 2 Iq (typ) (mA) 5.2 Load capacitance (µF) 1 Number of channels 1 THD + N at 1 kHz (%) 0.0005 Noise floor (RTO, 20-kHz BW) (dBu) -98 Slew rate (typ) (V/µs) 15 Small-signal bandwidth (typ) (Hz) 1500000 Supply voltage (max) (V) 36 Supply voltage (min) (V) 9 Operating temperature range (°C) -55 to 125 Rating Catalog
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Balanced Output
  • Low Distortion: 0.0005% at f = 1 kHz
  • Wide Output Swing: 17Vrms into 600 Ω
  • High Capacitive Load Drive
  • High Slew Rate: 15 V/µs
  • Wide Supply Range: ±4.5 V to ±18 V
  • Low Quiescent Current: ±5.2 mA
  • 8-Pin DIP, SO-8, and SOL-16 Packages
  • Companion to Audio Differential Line Receivers:
    INA134 and INA137
  • Improved Replacement for SSM2142
  • Balanced Output
  • Low Distortion: 0.0005% at f = 1 kHz
  • Wide Output Swing: 17Vrms into 600 Ω
  • High Capacitive Load Drive
  • High Slew Rate: 15 V/µs
  • Wide Supply Range: ±4.5 V to ±18 V
  • Low Quiescent Current: ±5.2 mA
  • 8-Pin DIP, SO-8, and SOL-16 Packages
  • Companion to Audio Differential Line Receivers:
    INA134 and INA137
  • Improved Replacement for SSM2142

The DRV134 and DRV135 are differential output amplifiers that convert a single-ended input to a balanced output pair. These balanced audio drivers consist of high performance op amps with on-chip precision resistors. They are fully specified for high performance audio applications and have excellent ac specifications, including low distortion (0.0005% at 1 kHz) and high slew rate (15 V/µs).

The on-chip resistors are laser-trimmed for accurate gain and optimum output common-mode rejection. Wide output voltage swing and high output drive capability allow use in a wide variety of demanding applications. They easily drive the large capacitive loads associated with long audio cables. Used in combination with the INA134 or INA137 differential receivers, they offer a complete solution for transmitting analog audio signals without degradation.

The DRV134 is available in 8-pin DIP and SOL-16 surface-mount packages. The DRV135 comes in a space-saving SO-8 surface-mount package. Both are specified for operation over the extended industrial temperature range, –40°C to +85°C and operate from –55°C to +125°C.

The DRV134 and DRV135 are differential output amplifiers that convert a single-ended input to a balanced output pair. These balanced audio drivers consist of high performance op amps with on-chip precision resistors. They are fully specified for high performance audio applications and have excellent ac specifications, including low distortion (0.0005% at 1 kHz) and high slew rate (15 V/µs).

The on-chip resistors are laser-trimmed for accurate gain and optimum output common-mode rejection. Wide output voltage swing and high output drive capability allow use in a wide variety of demanding applications. They easily drive the large capacitive loads associated with long audio cables. Used in combination with the INA134 or INA137 differential receivers, they offer a complete solution for transmitting analog audio signals without degradation.

The DRV134 is available in 8-pin DIP and SOL-16 surface-mount packages. The DRV135 comes in a space-saving SO-8 surface-mount package. Both are specified for operation over the extended industrial temperature range, –40°C to +85°C and operate from –55°C to +125°C.
filter 查找其他 音频线路驱动器
下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同，但引脚排列有所不同
DRV134 正在供货 采用 PDIP 和 SOL-16 封装的音频平衡线路驱动器 This device offers 8-pin dual in-line (PDIP|8) and 16-pin surface mount (SOIC|16) packages

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 2
类型 标题 下载最新的英语版本 日期
* 数据表 DRV13x Audio-Balanced Line Drivers 数据表 (Rev. B) PDF | HTML 2014年 9月 10日
应用手册 所选封装材料的热学和电学性质 2008年 10月 16日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

仿真模型

DRV135 PSpice Model (Rev. A)

SBOM005A.ZIP (35 KB) - PSpice Model
下载
仿真模型

DRV135 TINA-TI Reference Design (Rev. B)

SBOC145B.TSC (93 KB) - TINA-TI Reference Design
下载
仿真模型

DRV135 TINA-TI Spice Model (Rev. A)

SBOM214A.ZIP (4 KB) - TINA-TI Spice Model
下载
模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 CAD 符号、封装和 3D 模型
SOIC (D) 8 Ultra Librarian
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

视频