产品详情

Resolution (Bps) 16 Sample rate (max) (ksps) 125 Number of input channels 16 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 2.85, 5.35 Input voltage range (min) (V) -2.7, 0 Features GPIO, Oscillator Operating temperature range (°C) -40 to 105 Power consumption (typ) (mW) 42 Analog supply (min) (V) 4.75 Analog supply (max) (V) 5.25 Digital supply (min) (V) 2.5 Digital supply (max) (V) 3.6
Resolution (Bps) 16 Sample rate (max) (ksps) 125 Number of input channels 16 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 2.85, 5.35 Input voltage range (min) (V) -2.7, 0 Features GPIO, Oscillator Operating temperature range (°C) -40 to 105 Power consumption (typ) (mW) 42 Analog supply (min) (V) 4.75 Analog supply (max) (V) 5.25 Digital supply (min) (V) 2.5 Digital supply (max) (V) 3.6
VQFNP (RTC) 48 49 mm² 7 x 7
  • 16 Bits, No Missing Codes
  • Fixed-Channel or Automatic Channel Scan
  • Fixed-Channel Data Rate: 125kSPS
  • Auto-Scan Data Rate: 23.7kSPS/Channel
  • Single-Conversion Settled Data
  • 16 Single-Ended or 8 Differential Inputs
  • Unipolar (+5V) or Bipolar (±2.5V) Operation
  • 0.3LSB (INL)
  • DC Stability:
    1µV/°C Offset Drift, 2ppm/°C Gain Drift
  • Open-Sensor Detection
  • Conversion Control Pin
  • Multiplexer Output for External Signal Conditioning
  • On-Chip Temperature, Reference, Offset, Gain, and Supply Voltage Readback
  • 42mW Power Dissipation
  • Standby, Sleep, and Power-Down Modes
  • Eight General-Purpose Inputs/Outputs (GPIO)
  • 32.768kHz Crystal Oscillator or External Clock
  • APPLICATIONS
    • Medical, Avionics, and Process Control
    • Machine and System Monitoring
    • Fast Scan Multi-Channel Instrumentation
    • Industrial Systems
    • Test and Measurement Systems

    SPI is a trademark of Motorola, Inc.
    All other trademarks are the property of their respective owners.

    • 16 Bits, No Missing Codes
    • Fixed-Channel or Automatic Channel Scan
    • Fixed-Channel Data Rate: 125kSPS
    • Auto-Scan Data Rate: 23.7kSPS/Channel
    • Single-Conversion Settled Data
    • 16 Single-Ended or 8 Differential Inputs
    • Unipolar (+5V) or Bipolar (±2.5V) Operation
    • 0.3LSB (INL)
    • DC Stability:
      1µV/°C Offset Drift, 2ppm/°C Gain Drift
    • Open-Sensor Detection
    • Conversion Control Pin
    • Multiplexer Output for External Signal Conditioning
    • On-Chip Temperature, Reference, Offset, Gain, and Supply Voltage Readback
    • 42mW Power Dissipation
    • Standby, Sleep, and Power-Down Modes
    • Eight General-Purpose Inputs/Outputs (GPIO)
    • 32.768kHz Crystal Oscillator or External Clock
  • APPLICATIONS
    • Medical, Avionics, and Process Control
    • Machine and System Monitoring
    • Fast Scan Multi-Channel Instrumentation
    • Industrial Systems
    • Test and Measurement Systems

    SPI is a trademark of Motorola, Inc.
    All other trademarks are the property of their respective owners.

    The ADS1158 is a 16-channel (multiplexed), low-noise, 16-bit, delta-sigma (ΔΣ) analog-to-digital converter (ADC) that provides single-cycle settled data at channel scan rates from 1.8k to 23.7k samples per second (SPS) per channel. A flexible input multiplexer accepts combinations of eight differential or 16 single-ended inputs with a full-scale differential range of 5V or true bipolar range of ±2.5V when operating with a 5V reference. The fourth-order delta-sigma modulator is followed by a fifth-order sinc digital filter optimized for low-noise performance.

    The differential output of the multiplexer is accessible to allow signal conditioning before the input of the ADC. Internal system monitor registers provide supply voltage, temperature, reference voltage, gain, and offset data.

    An onboard PLL generates the system clock from a 32.768kHz crystal, or can be overridden by an external clock source. A buffered system clock output (15.7MHz) is provided to drive a microcontroller or additional converters.

    Serial digital communication is handled via an SPI™-compatible interface. A simple command word structure controls channel configuration, data rates, digital I/O, monitor functions, etc.

    Programmable sensor bias current sources can be used to bias sensors or verify sensor integrity.

    The ADS1158 operates from a unipolar +5V or bipolar ±2.5V analog supply and a digital supply compatible with interfaces ranging from 2.7V to 5.25V. The ADS1158 is available in a QFN-48 package.

    The ADS1158 is a 16-channel (multiplexed), low-noise, 16-bit, delta-sigma (ΔΣ) analog-to-digital converter (ADC) that provides single-cycle settled data at channel scan rates from 1.8k to 23.7k samples per second (SPS) per channel. A flexible input multiplexer accepts combinations of eight differential or 16 single-ended inputs with a full-scale differential range of 5V or true bipolar range of ±2.5V when operating with a 5V reference. The fourth-order delta-sigma modulator is followed by a fifth-order sinc digital filter optimized for low-noise performance.

    The differential output of the multiplexer is accessible to allow signal conditioning before the input of the ADC. Internal system monitor registers provide supply voltage, temperature, reference voltage, gain, and offset data.

    An onboard PLL generates the system clock from a 32.768kHz crystal, or can be overridden by an external clock source. A buffered system clock output (15.7MHz) is provided to drive a microcontroller or additional converters.

    Serial digital communication is handled via an SPI™-compatible interface. A simple command word structure controls channel configuration, data rates, digital I/O, monitor functions, etc.

    Programmable sensor bias current sources can be used to bias sensors or verify sensor integrity.

    The ADS1158 operates from a unipolar +5V or bipolar ±2.5V analog supply and a digital supply compatible with interfaces ranging from 2.7V to 5.25V. The ADS1158 is available in a QFN-48 package.

    下载 观看带字幕的视频 视频

    技术文档

    star =有关此产品的 TI 精选热门文档
    未找到结果。请清除搜索,并重试。
    查看全部 14
    类型 项目标题 下载最新的英语版本 日期
    * 数据表 16-Channel, 16-Bit Analog-to-Digital Converter 数据表 (Rev. D) 2011年 3月 17日
    更多文献资料 电桥测量基本指南 PDF | HTML 下载英文版本 PDF | HTML 2022年 6月 8日
    更多文献资料 计算 Δ-Σ ADC 的转换延迟和系统周期时间 PDF | HTML 下载英文版本 PDF | HTML 2022年 6月 8日
    电子书 Fundamentals of Precision ADC Noise Analysis 2020年 6月 19日
    更多文献资料 QFN and SON PCB Attachment (Rev. B) PDF | HTML 2018年 8月 24日
    更多文献资料 Digital Filter Types in Delta Sigma ADCs PDF | HTML 2017年 6月 27日
    模拟设计期刊 How delta-sigma ADCs work, Part 1 (Rev. A) 2016年 9月 19日
    EVM 用户指南 ADS1158EVM, ADS1258EVM User's Guide (Rev. D) 2016年 5月 14日
    电子书 Best of Baker's Best: Precision Data Converters -- Delta-Sigma ADCs 2015年 3月 19日
    技术文章 Leverage coherent sampling and FFT windows when evaluating SAR ADCs (Part 1) 2015年 3月 13日
    更多文献资料 ADS1258, ADS1258EP, and ADS1158 SPI Timeout Function 2012年 4月 20日
    更多文献资料 所选封装材料的热学和电学性质 2008年 10月 16日
    更多文献资料 模数规格和性能特性术语表 (Rev. A) 下载最新的英文版本 (Rev.B) 2008年 10月 16日
    更多文献资料 高速数据转换 下载英文版本 2008年 10月 16日

    设计和开发

    如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。

    评估板

    ADCPRO — 模数转换器 Pro (ADCPro™) 评估软件

    ADCPro™ 是一种模块化软件系统,无需昂贵的逻辑分析仪和复杂的分析程序即可对模数转换器 (ADC) 进行评估。单独使用适用于对从 ADC 测试中捕获的数据集执行分析;与德州仪器 (TI) ADC 评估模块 (EVM) 以及合适的数据采集卡配合使用时,它便可作为功能强大的评估测试包的一部分。

    lock = 需要出口许可(1 分钟)
    用户指南: PDF
    仿真模型

    ADS1158 IBIS Model

    SBAM124.ZIP (77 KB) - IBIS Model
    计算工具

    ADC-INPUT-CALC — 支持多种输入类型的模数转换器 (ADC) 输入驱动器设计工具

    ADC-INPUT-CALC 是一种在线工具,可为设计模数转换器 (ADC) 的输入缓冲器提供支持。它提供 24 种不同的基于运算放大器的缓冲器电路,这些电路可用于驱动 ADC 输入。可用拓扑涵盖差分单端和变压器耦合输入设计。支持交流耦合和直流耦合设计以及单电源和双电源拓扑。提供两种模式:初学者模式和专家模式。在初学者模式中,设计人员先回答一系列问题,然后会看到解决方案原理图,在某些情况下,还会看到解决方案的可选版本。在专家模式下,设计人员会看到用方框图形式显示的所有 24 (...)
    计算工具

    ANALOG-ENGINEER-CALC — 模拟工程师计算器

    模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
    lock = 需要出口许可(1 分钟)
    模拟工具

    PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

    PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

    借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。

    在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
    模拟工具

    TINA-TI — 基于 SPICE 的模拟仿真程序

    TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能,允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

    TINA-TI 安装需要大约 500MB。直接安装,如果想卸载也很容易。我们相信您肯定会爱不释手。

    TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。

    如需获取可用 TINA-TI 模型的完整列表,请参阅:SpiceRack - 完整列表 

    需要 HSpice (...)

    用户指南: PDF
    下载英文版本 (Rev.A): PDF
    封装 引脚数 下载
    VQFNP (RTC) 48 了解详情

    订购和质量

    包含信息:
    • RoHS
    • REACH
    • 器件标识
    • 引脚镀层/焊球材料
    • MSL 等级/回流焊峰值温度
    • MTBF/时基故障估算
    • 材料成分
    • 认证摘要
    • 持续可靠性监测

    推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

    支持与培训

    视频