SNVU859 June   2024 LP5813

 

  1.   1
  2.   Read This First
    1.     About This Manual
    2.     Notational Conventions
    3.     Glossary
    4.     Related Documentation
    5.     Support Resources
    6.     Trademarks
  3. 1Introduction/Feature Overview
    1. 1.1 Overview
  4. 2 Register Maps
    1. 2.1  Register Map Table
    2. 2.2  Device_Enable Registers
    3. 2.3  Config Registers
    4. 2.4  Command Registers
    5. 2.5  LED_Enable Registers
    6. 2.6  Fault_Clear Registers
    7. 2.7  Reset Registers
    8. 2.8  Manual_DC Registers
    9. 2.9  Manual_PWM Registers
    10. 2.10 Autonomous_DC Registers
    11. 2.11 LED_0_Autonomous_Animation Registers
    12. 2.12 LED_1_Autonomous_Animation Registers
    13. 2.13 LED_2_Autonomous_Animation Registers
    14. 2.14 LED_3_Autonomous_Animation Registers
    15. 2.15 LED_A0_Autonomous_Animation Registers
    16. 2.16 LED_A1_Autonomous_Animation Registers
    17. 2.17 LED_A2_Autonomous_Animation Registers
    18. 2.18 LED_B0_Autonomous_Animation Registers
    19. 2.19 LED_B1_Autonomous_Animation Registers
    20. 2.20 LED_B2_Autonomous_Animation Registers
    21. 2.21 LED_C0_Autonomous_Animation Registers
    22. 2.22 LED_C1_Autonomous_Animation Registers
    23. 2.23 LED_C2_Autonomous_Animation Registers
    24. 2.24 LED_D0_Autonomous_Animation Registers
    25. 2.25 LED_D1_Autonomous_Animation Registers
    26. 2.26 LED_D2_Autonomous_Animation Registers
    27. 2.27 Flag Registers
  5.   Revision History

2.10 Autonomous_DC Registers

Table 2-65 lists the memory-mapped registers for the Autonomous_DC registers. All register offset addresses not listed in Table 2-65 should be considered as reserved locations and the register contents should not be modified.

Table 2-65 AUTONOMOUS_DC Registers
AddressAcronymRegister NameSection
50hAuto_DC_0LED_0 current setting in autonomous modeGo
51hAuto_DC_1LED_1 current setting in autonomous modeGo
52hAuto_DC_2LED_2 current setting in autonomous modeGo
53hAuto_DC_3LED_3 current setting in autonomous modeGo
54hAuto_DC_4LED_A0 current setting in autonomous modeGo
55hAuto_DC_5LED_A1 current setting in autonomous modeGo
56hAuto_DC_6LED_A2 current setting in autonomous modeGo
57hAuto_DC_7LED_B0 current setting in autonomous modeGo
58hAuto_DC_8LED_B1 current setting in autonomous modeGo
59hAuto_DC_9LED_B2 current setting in autonomous modeGo
5AhAuto_DC_10LED_C0 current setting in autonomous modeGo
5BhAuto_DC_11LED_C1 current setting in autonomous modeGo
5ChAuto_DC_12LED_C2 current setting in autonomous modeGo
5DhAuto_DC_13LED_D0 current setting in autonomous modeGo
5EhAuto_DC_14LED_D1 current setting in autonomous modeGo
5FhAuto_DC_15LED_D2 current setting in autonomous modeGo

2.10.1 Auto_DC_0 Register (Address = 50h) [Reset = 00h]

Auto_DC_0 is shown in Figure 2-56 and described in Table 2-66.

Return to the Summary Table.

Figure 2-56 Auto_DC_0 Register
76543210
auto_dc_0
R/W-0h
Table 2-66 Auto_DC_0 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_0R/W0h LED_0 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.2 Auto_DC_1 Register (Address = 51h) [Reset = 00h]

Auto_DC_1 is shown in Figure 2-57 and described in Table 2-67.

Return to the Summary Table.

Figure 2-57 Auto_DC_1 Register
76543210
auto_dc_1
R/W-0h
Table 2-67 Auto_DC_1 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_1R/W0h LED_1 current setting in autonomous mode

0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.3 Auto_DC_2 Register (Address = 52h) [Reset = 00h]

Auto_DC_2 is shown in Figure 2-58 and described in Table 2-68.

Return to the Summary Table.

Figure 2-58 Auto_DC_2 Register
76543210
auto_dc_2
R/W-0h
Table 2-68 Auto_DC_2 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_2R/W0h LED_2 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.4 Auto_DC_3 Register (Address = 53h) [Reset = 00h]

Auto_DC_3 is shown in Figure 2-59 and described in Table 2-69.

Return to the Summary Table.

Figure 2-59 Auto_DC_3 Register
76543210
auto_dc_3
R/W-0h
Table 2-69 Auto_DC_3 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_3R/W0h LED_3 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.5 Auto_DC_4 Register (Address = 54h) [Reset = 00h]

Auto_DC_4 is shown in Figure 2-60 and described in Table 2-70.

Return to the Summary Table.

Figure 2-60 Auto_DC_4 Register
76543210
auto_dc_a0
R/W-0h
Table 2-70 Auto_DC_4 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_a0R/W0h LED_A0 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.6 Auto_DC_5 Register (Address = 55h) [Reset = 00h]

Auto_DC_5 is shown in Figure 2-61 and described in Table 2-71.

Return to the Summary Table.

Figure 2-61 Auto_DC_5 Register
76543210
auto_dc_a1
R/W-0h
Table 2-71 Auto_DC_5 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_a1R/W0h LED_A1 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.7 Auto_DC_6 Register (Address = 56h) [Reset = 00h]

Auto_DC_6 is shown in Figure 2-62 and described in Table 2-72.

Return to the Summary Table.

Figure 2-62 Auto_DC_6 Register
76543210
auto_dc_a2
R/W-0h
Table 2-72 Auto_DC_6 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_a2R/W0h LED_A2 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.8 Auto_DC_7 Register (Address = 57h) [Reset = 00h]

Auto_DC_7 is shown in Figure 2-63 and described in Table 2-73.

Return to the Summary Table.

Figure 2-63 Auto_DC_7 Register
76543210
auto_dc_b0
R/W-0h
Table 2-73 Auto_DC_7 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_b0R/W0h LED_B0 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.9 Auto_DC_8 Register (Address = 58h) [Reset = 00h]

Auto_DC_8 is shown in Figure 2-64 and described in Table 2-74.

Return to the Summary Table.

Figure 2-64 Auto_DC_8 Register
76543210
auto_dc_b1
R/W-0h
Table 2-74 Auto_DC_8 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_b1R/W0h LED_B1 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.10 Auto_DC_9 Register (Address = 59h) [Reset = 00h]

Auto_DC_9 is shown in Figure 2-65 and described in Table 2-75.

Return to the Summary Table.

Figure 2-65 Auto_DC_9 Register
76543210
auto_dc_b2
R/W-0h
Table 2-75 Auto_DC_9 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_b2R/W0h LED_B2 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.11 Auto_DC_10 Register (Address = 5Ah) [Reset = 00h]

Auto_DC_10 is shown in Figure 2-66 and described in Table 2-76.

Return to the Summary Table.

Figure 2-66 Auto_DC_10 Register
76543210
auto_dc_c0
R/W-0h
Table 2-76 Auto_DC_10 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_c0R/W0h LED_C0 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.12 Auto_DC_11 Register (Address = 5Bh) [Reset = 00h]

Auto_DC_11 is shown in Figure 2-67 and described in Table 2-77.

Return to the Summary Table.

Figure 2-67 Auto_DC_11 Register
76543210
auto_dc_c1
R/W-0h
Table 2-77 Auto_DC_11 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_c1R/W0h LED_C1 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.13 Auto_DC_12 Register (Address = 5Ch) [Reset = 00h]

Auto_DC_12 is shown in Figure 2-68 and described in Table 2-78.

Return to the Summary Table.

Figure 2-68 Auto_DC_12 Register
76543210
auto_dc_c2
R/W-0h
Table 2-78 Auto_DC_12 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_c2R/W0h LED_C2 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.14 Auto_DC_13 Register (Address = 5Dh) [Reset = 00h]

Auto_DC_13 is shown in Figure 2-69 and described in Table 2-79.

Return to the Summary Table.

Figure 2-69 Auto_DC_13 Register
76543210
auto_dc_d0
R/W-0h
Table 2-79 Auto_DC_13 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_d0R/W0h LED_D0 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.15 Auto_DC_14 Register (Address = 5Eh) [Reset = 00h]

Auto_DC_14 is shown in Figure 2-70 and described in Table 2-80.

Return to the Summary Table.

Figure 2-70 Auto_DC_14 Register
76543210
auto_dc_d1
R/W-0h
Table 2-80 Auto_DC_14 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_d1R/W0h LED_D1 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.10.16 Auto_DC_15 Register (Address = 5Fh) [Reset = 00h]

Auto_DC_15 is shown in Figure 2-71 and described in Table 2-81.

Return to the Summary Table.

Figure 2-71 Auto_DC_15 Register
76543210
auto_dc_d2
R/W-0h
Table 2-81 Auto_DC_15 Register Field Descriptions
BitFieldTypeResetDescription
7-0auto_dc_d2R/W0h LED_D2 current setting in autonomous mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%