SBAU442A December   2023  – December 2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
  8. 2Hardware
    1. 2.1 Board Overview
    2. 2.2 Required Equipment
    3. 2.3 Hardware Modifications
    4. 2.4 Hardware Setup
  9. 3Software
    1. 3.1 Software Setup
  10. 4Implementation Results
    1. 4.1 Bringup
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6References
  13. 7Revision History

2.2 Required Equipment

The following equipment is not included with the EVM kit, but is required for proper evaluation.

  1. TSWDC155EVM for capturing the data from the ADC3910D125EVM
  2. At least two, low-noise, signal generators for to provide the ADC sampling clock and an analog input. TI recommends either of the following signal generators:
    • Rohde & Schwarz SMA100A
    • Rohde & Schwarz SMA100B
  3. Bandpass filters for the sample clock and the analog inputs. The filters has a narrow passband within 5%-15% of the desired bandwidth and minimal insertion loss.
  4. SMA cables for signal connections.