SBAU227A March   2014  – June 2021

 

  1.   Trademarks
  2. 1Introduction
  3. 2Performance Specification Summary
  4. 3Modifications
    1. 3.1 Output Voltage Set Point
    2. 3.2 Output Voltage Set Point Using I2C Interface
      1. 3.2.1 PC Preparation
      2. 3.2.2 Connect the PC
      3. 3.2.3 Voltage Scaling Procedure
    3. 3.3 Output Filter and Closed Loop Response
  5. 4Test Setup and Results
    1. 4.1 Input/Output Connections
    2. 4.2 Start Up Procedure
    3. 4.3 Efficiency
    4. 4.4 Load Regulation
    5. 4.5 Line Regulation
    6. 4.6 Load Transient Response
    7. 4.7 Output Voltage Ripple
    8. 4.8 Start Up
    9. 4.9 Shut Down
  6. 5Board Layout
    1. 5.1 Board Layout
  7. 6Schematic, Bill of Materials and Reference
    1. 6.1 Schematic
    2. 6.2 Bill of Materials
    3. 6.3 Reference
  8. 7Revision History

4.8 Start Up

Figure 4-7 shows the TPS56C20EVM-614 start up waveform as relative to VIN.

GUID-FA5E0C73-58E0-40EC-944B-22C22B5F048C-low.pngFigure 4-7 TPS56C20EVM-614 Start Up Relative to VIN

Figure 4-8 shows the TPS56C20EVM-614 Start Up waveform is relative to Enable(EN).

GUID-FA5E0C73-58E0-40EC-944B-22C22B5F048C-low.pngFigure 4-8 TPS56C20EVM-614 Start Up Relative to Enable