ZHCSSW7A june   2023  – august 2023 UCC27311A-Q1

ADVANCE INFORMATION  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Revision History
  6. 5 说明（续）
  7. 6 Pin Configuration and Functions
  8. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Switching Characteristics
    7. 7.7 Timing Diagrams
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Input Stages
      2. 8.3.2 Enable
      3. 8.3.3 Undervoltage Lockout (UVLO)
      4. 8.3.4 Level Shifter
      5. 8.3.5 Boot Diode
      6. 8.3.6 Output Stages
      7. 8.3.7 Negative Voltage Transients
    4. 8.4 Device Functional Modes
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Input Threshold Type
        2. 9.2.2.2 VDD Bias Supply Voltage
        3. 9.2.2.3 Peak Source and Sink Currents
        4. 9.2.2.4 Propagation Delay
        5. 9.2.2.5 Power Dissipation
  11. 10Power Supply Recommendations
  12. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
    3. 11.3 Thermal Considerations
  13. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 第三方产品免责声明
    2. 12.2 Documentation Support
      1. 12.2.1 Related Documentation
    3. 12.3 接收文档更新通知
    4. 12.4 支持资源
    5. 12.5 Trademarks
    6. 12.6 静电放电警告
    7. 12.7 术语表
  14. 13Mechanical, Packaging, and Orderable Information
    1. 13.1 Package Option Addendum
      1.      55
    2. 13.2 Tape and Reel Information
    3. 13.3 Mechanical Data

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • DRC|10
散热焊盘机械数据 (封装 | 引脚)

7.5 Electrical Characteristics

VDD = VHB =12 V, VHS = VSS = 0 V, No load on LO or HO, TA = TJ = –40°C to +150°C, (unless otherwise noted).
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SUPPLY CURRENTS
IDD VDD quiescent current VLI = VHI = 0, VEN = 3V 0.05 0.085 0.17 mA
IDDO VDD operating current  f = 500 kHz, CLOAD = 0, VEN = 3V 2.1 2.5 6.5 mA
IHB Boot voltage quiescent current VLI = VHI = 0 V, VEN = 3V 0.015 0.065 0.1 mA
IHBO Boot voltage operating current f = 500 kHz, CLOAD = 0, VEN = 3V 1.5 2.5 5.1 mA
IHBS HB to VSS quiescent current VHS = VHB = 105 V, VEN = 3V 0.0005 1 μA
IHBSO HB to VSS operating current f = 500 kHz, CLOAD = 0, VEN = 3V 0.07 1.2 mA
IDD_DIS Driver Current when EN pin is pulled low (Disabled) VEN = 0 7 μA
INPUT
VHIT_HI Input voltage high threshold  1.7 2.3 2.55 V
VHIT_LI Input voltage high threshold  1.7 2.3 2.55 V
VLIT_HI Input voltage low threshold  1.2 1.6 1.9 V
VLIT_LI Input voltage low threshold  1.2 1.6 1.9 V
VIHYS  HI Input voltage Hysteresis 0.7 V
VIHYS  LI Input voltage Hysteresis  0.7 V
RIN_HI Input pulldown resistance  VIN = 3V 68 kΩ
RIN_LI Input pulldown resistance  VIN = 3V 68 kΩ
ENABLE
VEN Voltage threshold on EN pin to enable the driver 1.7 2.3 2.55 V
VDIS Voltage threshold on EN pin to disable the driver 1.2 1.6 1.9 V
VENHYS Enable pin Hysteresis 0.7 V
REN EN pin internal pull-down resistance VEN = 3V 80 kΩ
TEN EN pin response time VEN = 3V 18 70 μs
TDIS EN pin response time VEN = 0V 1.5 10 μs
UNDERVOLTAGE PROTECTION (UVLO)
VDDR VDD rising threshold 6.2 7 7.8 V
VDDHYS VDD threshold hysteresis 0.5 V
VHBR VHB rising threshold 5.6 6.7 7.9 V
VHBHYS VHB threshold hysteresis 1.1 V
BOOTSTRAP DIODE
VF Low-current forward voltage I VDD - HB = 100 μA 0.65 0.8 V
VFI High-current forward voltage I VDD - HB = 100 mA 0.9 1.05 V
RD Dynamic resistance, ΔVF/ΔI I VDD - HB = 160 mA and 180 mA 0.3 0.5 0.85 Ω
LO GATE DRIVER
VLOL Low level output voltage ILO = 100 mA 0.1 0.19 V
VLOH High level output voltage ILO = -100 mA, VLOH = VDD – VLO 0.16 0.29 V
Peak pullup current(1) VLO = 0 V 3.7 A
Peak pulldown current(1) VLO = 12 V 4.5 A
HO GATE DRIVER
VHOL Low level output voltage IHO = 100 mA 0.1 0.19 V
VHOH High level output voltage IHO = –100 mA, VHOH = VHB- VHO 0.16 0.29 V
Peak pullup current(1) VHO = 0 V 3.7 A
Peak pulldown current(1) VHO = 12 V 4.5 A
(1) Parameter not tested in production.