ZHCSE12E 数据表 | 德州仪器 TI.com.cn

ZHCSE12E June 2015 – October 2019 TS5A22362

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

DGS|10
- MPDS035C
YZP|10
- MXBG069I
DRC|10
- MPDS117L

散热焊盘机械数据 (封装 | 引脚)

DRC|10
- QFND076F

订购信息

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) ⁽¹⁾

			MIN	MAX	UNIT
V_CC⁽²⁾	Supply voltage ⁽³⁾		–0.5	6	V
V_NC V_NO V_COM	Analog voltage ⁽³⁾⁽⁴⁾⁽⁵⁾		V_CC – 6	V_CC + 0.5	V
I_I/OK	Analog port diode current	V_NC, V_NO, V_COM < 0 or V_NC, V_NO, V_COM > V_CC	–50	50	mA
I_NC I_NO I_COM	ON-state switch current	V_NC, V_NO, V_COM = 0 to V_CC	–150	150	mA
I_NC I_NO I_COM	ON-state peak switch current ⁽⁶⁾	V_NC, V_NO, V_COM = 0 to V_CC	–300	300	mA
I_NC⁽³⁾⁽⁷⁾⁽⁸⁾ I_NO⁽³⁾⁽⁷⁾⁽⁸⁾ I_COM⁽³⁾⁽⁷⁾⁽⁸⁾	ON-state switch current	V_NC, V_NO, V_COM = 0 to V_CC	–350	350	mA
I_NC⁽³⁾⁽⁷⁾⁽⁸⁾ I_NO⁽³⁾⁽⁷⁾⁽⁸⁾ I_COM⁽³⁾⁽⁷⁾⁽⁸⁾	ON-state peak switch current ⁽⁶⁾	V_NC, V_NO, V_COM = 0 to V_CC	–500	500	mA
V_I	Digital input voltage		–0.5	6.5	V
I_IK	Digital input clamp current ⁽³⁾⁽⁴⁾	V_I < 0	–50	50	mA
I_CC I_GND	Continuous current through V_CCor GND		–100	100	mA
T_stg	Storage temperature		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum

(3) All voltages are with respect to ground, unless otherwise specified.

(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

(5) This value is limited to 5.5 V maximum.

(6) Pulse at 1-ms duration < 10% duty cycle.

(7) V_CC = 3.0 V to 5.0 V, T_A= –40°C to 85°C.

(8) For YZP package only.