ZHCSE12E June   2015  – October 2019 TS5A22362

PRODUCTION DATA.  

  1. 特性
  2. 应用
  3. 说明
    1.     Device Images
      1.      典型应用原理图
  4. 修订历史记录
  5. Pin Configuration and Functions
    1.     Pin Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics for 2.5-V Supply
    6. 6.6 Electrical Characteristics for 3.3-V Supply
    7. 6.7 Electrical Characteristics for 5-V Supply
    8. 6.8 Typical Characteristics
  7. Parameter Measurement Information
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Negative Signaling Capacity
    4. 8.4 Device Functional Modes
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 接收文档更新通知
    2. 12.2 社区资源
    3. 12.3 商标
    4. 12.4 静电放电警告
    5. 12.5 Glossary
  13. 13机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Electrical Characteristics for 2.5-V Supply

VCC = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) (1)
PARAMETER TEST CONDITIONS TA VCC MIN TYP MAX UNIT
Analog Switch
VCOM,
VNO, VNC
Analog signal
range
VCC – 5.5 VCC V
Ron ON-state
resistance
VNC or VNO = VCC, 1.5 V,
VCC – 5.5 V
ICOM = –100 mA,
COM to NO or NC,
see Figure 13
25°C 2.7 V 0.65 0.94
Full 1.3
ΔRon ON-state
resistance match
between channels
VNC or VNO = 1.5 V,
ICOM = –100 mA,
COM to NO or NC,
see Figure 13
25°C 2.7 V 0.023 0.11
Full 0.15
Ron(flat) ON-state
resistance
flatness
VNC or VNO = VCC, 1.5 V,
VCC – 5.5 V
ICOM = –100 mA,
COM to NO or NC,
see Figure 13
25°C 2.7 V 0.18 0.46
Full 0.5
INC(OFF),
INO(OFF)
NC, NO
OFF leakage
current
VNC = 2.25 V, VCC – 5.5 V
VCOM = VCC – 5.5 V, 2.25 V
VNO = Open
COM to NO
or
VNO = 2.25 V, VCC – 5.5 V,
VCOM = VCC – 5.5 V, 2.25 V
VNC = Open
COM to NC
See Figure 14 25°C 2.7 –50 50 nA
Full –375 375
ICOM(ON) COM
ON leakage
current
VNC and VNO = Floating,
VCOM = VCC,VCC – 5.5 V
See Figure 15 25°C 2.7 V –50 50 nA
Full –375 375
Digital Control Inputs (IN) (2)
VIH Input logic high Full 1.4 5.5 V
VIL Input logic low 0.6
IIH, IIL Input leakage current VIN = VCC or 0 25°C 2.7 V –250 250 nA
Full –250 250
Dynamic
tON Turnon time VCOM = VCC,
RL = 300 Ω,
CL = 35 pF,
see Figure 17
25°C 2.5 V 44 80 ns
Full 2.3 V to 2.7 V 120
tOFF Turnoff time VCOM = VCC,
RL = 300 Ω,
CL = 35 pF,
see Figure 17
25°C 2.5 V 22 70 ns
Full 2.3 V to 2.7 V 70
tBBM Break-before-make time See Figure 18 25°C 2.5 V 1 7 ns
QC Charge injection VGEN = 0,
RGEN = 0,
CL = 1 nF,
see Figure 22
25°C 2.5 V 150 pC
CNC(OFF),
CNO(OFF)
NC, NO
OFF capacitance
VNC or VNO = VCC or GND, See Figure 16 25°C 2.5 V 70 pF
CCOM(ON) NC, NO, COM
ON capacitance
VCOM = VCC or GND,
Switch ON, f = 10 MHz
See Figure 16 25°C 2.5 V 370 pF
CI Digital input capacitance VI = VCC or GND See Figure 16 25°C 2.5 V 2.6 pF
BW Bandwidth RL = 50 Ω, –3 dB See Figure 18 25°C 2.5 V 17 MHz
OISO OFF isolation RL = 50 Ω f = 100 kHz,
see Figure 20
25°C 2.5 V –66 dB
XTALK Crosstalk RL = 50 Ω f = 100 kHz,
see Figure 21
25°C 2.5 V –75 dB
THD Total harmonic distortion RL = 600 Ω,
CL = 35 pF
f = 20 Hz to
20 kHz,
see Figure 23
25°C 2.5 V 0.01%
Supply
ICC Positive
supply current
VCOM and VIN = VCC or GND,
VNC and VNO = Floating
25°C 2.7 V 0.2 1.1 μA
Full 1.3
ICC Positive
supply current
VCOM = VCC – 5.5 V,
VIN = VCC or GND,
VNC and VNO = Floating
Full 2.7 V 3.3 μA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All unused digital inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, SCBA004.