ZHCSKS5C September   2020  – January 2024 TPS3899

PRODUCTION DATA  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Device Comparison
  6.   Pin Configuration and Functions
  7. Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Timing Diagrams
    8. 5.8 Typical Characteristics
  8. Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 VDD Hysteresis
      2. 6.3.2 User-Programmable Sense and Reset Time Delay
      3. 6.3.3 RESET/RESET Output
      4. 6.3.4 SENSE Input
        1. 6.3.4.1 Immunity to SENSE Pin Voltage Transients
    4. 6.4 Device Functional Modes
      1. 6.4.1 Normal Operation (VDD > VDD(min))
      2. 6.4.2 Above Power-On-Reset But Less Than VDD(min) (VPOR < VDD < VDD(min))
      3. 6.4.3 Below Power-On-Reset (VDD < VPOR)
  9. Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
      3. 7.2.3 Application Curves
      4. 7.2.4 Power Supply Recommendations
      5. 7.2.5 Layout
        1. 7.2.5.1 Layout Guidelines
        2. 7.2.5.2 Layout Example
  10. Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Device Nomenclature
    2. 8.2 Receiving Notification of Documentation Updates
    3. 8.3 支持资源
    4. 8.4 Trademarks
    5. 8.5 静电放电警告
    6. 8.6 术语表
  11. Revision History
  12. 10Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Overview

The TPS3899 voltage supervisor with push-button monitor asserts a RESET/RESET signal when the SENSE pin voltage drops below VIT- for the duration of the sense delay set by CTS. If the SENSE pin voltage rises above VIT- + VHYS before the sense delay expires, the RESET/RESET pin does not assert. When asserted, the RESET/RESET output remains asserted until SENSE voltage returns above VIT- + VHYS for the duration of the reset delay set by CTR. If the SENSE pin voltage falls below VIT- before the reset delay expires while RESET is asserted, RESET/RESET will remain asserted.

Like most voltage supervisors, the TPS3899 includes a reset delay tD to provide time for the power and clocks to settle before letting the processor out of reset. At power up, the circuits inside the TPS3899 need additional time to start the reset delay timer after its power supply VDD has reached minimum VDD(MIN) for these circuits to start operating properly. This additional time is specified with the parameter start-up delay tSTRT. Figure 5-1 shows the timing diagram indicating this additional delay. After VDD is stable and above VDD(MIN) subsequent changes of the sense voltage across the threshold voltage will trigger reset after only the reset delay. The reset time delay tD is set by a capacitor on the CTR pin. The start-up delay has a max spec limit of 300μs for a ramp rate of
VDD ≤ 1V/μS.