ZHCSNC9C february   2021  – july 2023 TMUX7308F , TMUX7309F

PRODUCTION DATA  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Revision History
  6. Device Comparison Table
  7. Pin Configuration and Functions
  8. Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Thermal Information
    4. 7.4  Recommended Operating Conditions
    5. 7.5  Electrical Characteristics (Global)
    6. 7.6  ±15 V Dual Supply: Electrical Characteristics
    7. 7.7  ±20 V Dual Supply: Electrical Characteristics
    8. 7.8  12 V Single Supply: Electrical Characteristics
    9. 7.9  36 V Single Supply: Electrical Characteristics
    10. 7.10 Typical Characteristics
  9. Parameter Measurement Information
    1. 8.1  On-Resistance
    2. 8.2  Off-Leakage Current
    3. 8.3  On-Leakage Current
    4. 8.4  Input and Output Leakage Current Under Overvoltage Fault
    5. 8.5  Break-Before-Make Delay
    6. 8.6  Enable Delay Time
    7. 8.7  Transition Time
    8. 8.8  Fault Response Time
    9. 8.9  Fault Recovery Time
    10. 8.10 Charge Injection
    11. 8.11 Off Isolation
    12. 8.12 Crosstalk
    13. 8.13 Bandwidth
    14. 8.14 THD + Noise
  10. Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1 Flat On – Resistance
      2. 9.3.2 Protection Features
        1. 9.3.2.1 Input Voltage Tolerance
        2. 9.3.2.2 Powered-Off Protection
        3. 9.3.2.3 Fail-Safe Logic
        4. 9.3.2.4 Overvoltage Protection and Detection
        5. 9.3.2.5 Adjacent Channel Operation During Fault
        6. 9.3.2.6 ESD Protection
        7. 9.3.2.7 Latch-Up Immunity
        8. 9.3.2.8 EMC Protection
      3. 9.3.3 Bidirectional Operation
      4. 9.3.4 1.8 V Logic Compatible Inputs
      5. 9.3.5 Integrated Pull-Down Resistor on Logic Pins
    4. 9.4 Device Functional Modes
      1. 9.4.1 Normal Mode
      2. 9.4.2 Fault Mode
      3. 9.4.3 Truth Tables
  11. 10Application and Implementation
    1. 10.1 Application Information
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
      2. 10.2.2 Detailed Design Procedure
      3. 10.2.3 Application Curves
    3. 10.3 Power Supply Recommendations
    4. 10.4 Layout
      1. 10.4.1 Layout Guidelines
      2. 10.4.2 Layout Example
  12. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 接收文档更新通知
    3. 11.3 支持资源
    4. 11.4 Trademarks
    5. 11.5 静电放电警告
    6. 11.6 术语表
  13. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

±20 V Dual Supply: Electrical Characteristics

VDD = +20 V ± 10%, VSS = –20 V ±10%, GND = 0 V (unless otherwise noted) 
Typical at VDD = +20 V, VSS = –20 V, TA = 25℃  (unless otherwise noted)
PARAMETER TEST CONDITIONS TA MIN TYP MAX UNIT
ANALOG SWITCH
RON On-resistance VS = –15 V to +15 V,
IS = –1 mA
25°C 180 250 Ω
–40°C to +85°C 330
–40°C to +125°C 390
ΔRON On-resistance mismatch between channels VS = –15 V to +15 V,
IS = –1 mA
25°C 2.5 8 Ω
–40°C to +85°C 12
–40°C to +125°C 13
RFLAT On-resistance flatness VS = –15 V to +15 V,
IS = –1 mA
25°C 8 10 Ω
–40°C to +85°C 12
–40°C to +125°C 12
RFLAT On-resistance flatness VS = –13.5 V to +13.5 V,
IS = –1 mA
25°C 1.5 3.5 Ω
–40°C to +85°C 4
–40°C to +125°C 4
RON_DRIFT On-resistance drift VS = 0 V, IS = –1 mA –40°C to +125°C 1 Ω/°C
IS(OFF) Source off leakage current(1) VDD = 22 V, VSS = –22 V
Switch state is off
VS = +15 V / –15 V
VD = –15 V / + 15 V
25°C –1 0.1 1 nA
–40°C to +85°C –1 1
–40°C to +125°C –4 4
ID(OFF) Drain off leakage current(1) VDD = 22 V, VSS = –22 V
Switch state is off
VS = +15 V / –15 V
VD = –15 V / + 15 V
25°C –1 0.1 1 nA
–40°C to +85°C –3 3
–40°C to +125°C –14 14
IS(ON)
ID(ON)
Output on leakage current(2) VDD = 22 V, VSS = –22 V
Switch state is on
VS = VD = ±15 V
25°C –1.5 0.3 1.5 nA
–40°C to +85°C –5 5
–40°C to +125°C –22 22
FAULT CONDITION
IS(FA) Input leakage current
during overvoltage
VS = ± 60 V, GND = 0 V,
VDD = 22 V, VSS = –22 V
–40°C to +125°C ±95 µA
IS(FA) Grounded Input leakage current
during overvoltage with
grounded supply voltages
VS = ± 60 V, GND = 0 V,
VDD = VSS =  0 V
–40°C to +125°C ±135 µA
IS(FA) Floating Input leakage current
during overvoltage with
floating supply voltages
VS = ± 60 V, GND = 0 V,
VDD = VSS = floating
–40°C to +125°C ±135 µA
ID(FA) Output leakage current
during overvoltage
VS = ± 60 V, GND = 0V, 
VDD = 22 V, VSS = –22 V, 
–21V ≤ VD ≤ 22V
25°C –50 ±10 50 nA
–40°C to +85°C –70 70
–40°C to +125°C –90 90
ID(FA) Grounded Output leakage current
during overvoltage with
grounded supply voltages
VS = ± 60 V, GND = 0 V,
VDD = VSS =  0 V
25°C –50 ±1 50 nA
–40°C to +85°C –100 100
–40°C to +125°C –500 500
ID(FA) Floating Output leakage current
during overvoltage with
floating supply voltages
VS = ± 60 V, GND = 0 V,
VDD = VSS = floating
25°C ±3 µA
–40°C to +85°C ±5
–40°C to +125°C ±8
LOGIC INPUT/ OUTPUT
IIH High-level input current VEN = VAx = VDD 25°C –2.2 ± 0.6 2.2 µA
–40°C to +125°C –2.2 2.2
IIL Low-level input current VEN = VAx = 0 V 25°C –1.1 ± 0.6 1.1 µA
–40°C to +125°C –1.2 1.2
SWITCHING CHARACTERISTICS
tON (EN) Enable turn-on time VS = 10 V,
RL = 4 kΩ, CL= 12 pF
25°C 175 300 ns
–40°C to +85°C 325
–40°C to +125°C 350
tOFF (EN) Enable turn-off time VS = 10 V,
RL = 4 kΩ, CL= 12 pF
25°C 350 400 ns
–40°C to +85°C 400
–40°C to +125°C 420
tTRAN Transition time VS = 10 V,
RL = 4 kΩ, CL= 12 pF
25°C 170 245 ns
–40°C to +85°C 270
–40°C to +125°C 285
tRESPONSE Fault response time RL = 4 kΩ, CL= 12 pF 25°C 300 ns
tRECOVERY Fault recovery time RL = 4 kΩ, CL= 12 pF 25°C 1.2 µs
tBBM Break-before-make time delay VS = 10 V, RL = 4 kΩ, CL= 12 pF –40°C to +125°C 50 120 ns
QINJ Charge injection VS = 0 V, CL = 1 nF 25°C –17 pC
OISO Off-isolation RS = 50 Ω, RL = 50 Ω, CL = 5 pF,
VS = 200 mVRMS, VBIAS = 0 V, f = 1 MHz
25°C –85 dB
XTALK Intra-channel crosstalk RS = 50 Ω, RL = 50 Ω, CL = 5 pF,
VS = 200 mVRMS, VBIAS = 0 V, f = 1 MHz
25°C –95 dB
Inter-channel crosstalk (TMUX7309F) –103
BW –3 dB bandwidth (TMUX7308F) RS = 50 Ω, RL = 50 Ω, CL = 5 pF,
VS = 200 mVRMS, VBIAS = 0 V
25°C 150 MHz
–3 dB bandwidth (TMUX7309F WQFN Package) 285
–3 dB bandwidth (TMUX7309F TSSOP Package) 245
ILOSS Insertion loss RS = 50 Ω, RL = 50 Ω, CL = 5 pF,
VS = 200 mVRMS, VBIAS = 0 V, f = 1 MHz
25°C –9 dB
THD+N Total harmonic distortion plus noise RS = 40 Ω, RL = 10 kΩ, VS = 20 VPP, VBIAS = 0 V, f = 20 Hz to 20 kHz 25°C 0.0015 %
CS(OFF) Input off-capacitance f = 1 MHz, VS = 0 V 25°C 3.5 pF
CD(OFF) Output off-capacitance (TMUX7308F) f = 1 MHz, VS = 0 V 25°C 28 pF
Output off-capacitance (TMUX7309F) f = 1 MHz, VS = 0 V 25°C 14
CS(ON)
CD(ON)
Input/Output on-capacitance (TMUX7308F) f = 1 MHz, VS = 0 V 25°C 30 pF
Input/Output on-capacitance (TMUX7309F) f = 1 MHz, VS = 0 V 25°C 16
POWER SUPPLY
IDD VDD supply current VDD = 22 V, VSS = –22 V,
VAx = 0 V, 5 V, or VDD, VEN = 5 V or VDD
25°C 0.25 0.5 mA
–40°C to +85°C 0.5
–40°C to +125°C 0.5
ISS VSS supply current VDD = 22 V, VSS = –22 V,
VAx = 0 V, 5 V, or VDD, VEN = 5 V or VDD
25°C 0.15 0.4 mA
–40°C to +85°C 0.4
–40°C to +125°C 0.4
IGND GND current VDD = 22 V, VSS =  –22 V,
VAx = 0 V, 5 V, or VDD, VEN = 5 V or VDD
25°C 0.075 mA
IDD(FA) VDD supply current under fault VS = ± 60 V,
VDD = 22 V, VSS = –22 V,
VAx = 0 V, 5 V, or VDD, VEN = 5 V or VDD
25°C 0.25 1 mA
–40°C to +85°C 1
–40°C to +125°C 1
ISS(FA) VSS supply current under fault VS = ± 60 V,
VDD = 22 V, VSS = –22 V,
VAx = 0 V, 5 V, or VDD, VEN = 5 V or VDD
25°C 0.15 0.5 mA
–40°C to +85°C 0.5
–40°C to +125°C 0.5
IGND(FA) GND current under fault VS = ± 60 V,
VDD = 22 V, VSS = –22 V,
VAx = 0 V, 5 V, or VDD, VEN = 5 V or VDD
25°C 0.15 mA
IDD(DISABLE) VDD supply current (disable mode) VDD = 22 V, VSS = –22 V,
VAx = 0 V, 5 V, or VDD, VEN = 0 V
25°C 0.15 0.5 mA
–40°C to +85°C 0.5 mA
–40°C to +125°C 0.5 mA
ISS(DISABLE) VSS supply current (disable mode) VDD = 22 V, VSS = –22 V,
VAx = 0 V, 5 V, or VDD, VEN = 0 V
25°C 0.1 0.4 mA
–40°C to +85°C 0.4 mA
–40°C to +125°C 0.4 mA
When VS is positive,VD is negative. And when VS is negative, VD is positive.
When VS is at a voltage potential, VD is floating. And when VD is at a voltage potential, VS is floating.