over operating free-air temperature range (unless otherwise noted)(1)
|
MIN |
MAX |
UNIT |
| VCC+ |
Supply voltage(2) VS= (V+)−(V−) |
|
38 |
V |
| VID |
Differential input voltage range(3) |
VS + 0.2 |
|
| VI |
Input voltage range |
(V–) – 0.5 |
(V+) + 0.5 |
V |
| II |
Input current |
|
±1 |
mA |
| IO |
Output current |
|
Continuous |
mA |
|
Duration of short-circuit current at (or
below) 25°C(4) |
Unlimited |
|
|
Continuous total dissipation |
See Section 6.2 |
|
| TA |
Operating free-air temperature range |
C suffix |
0 |
70 |
°C |
| I suffix |
–40 |
85 |
| Tstg |
Storage temperature |
65 |
150 |
°C |
|
Lead temperature 1.6mm (1/16 inch) from case for 10 seconds |
DW package |
|
260 |
°C |
| N package |
(1) Operation outside the Absolute Maximum Ratings may cause
permanent device damage. Absolute Maximum Ratings do not imply functional operation
of the device at these or any other conditions beyond those listed under Recommended
Operating Conditions. If used outside the Recommended Operating Conditions but
within the Absolute Maximum Ratings, the device may not be fully functional, and this
may affect device reliability, functionality, performance, and shorten the device
lifetime.
(2) All voltage values are with
respect to network ground terminal GND.
(3) Differential voltages are at IN+
with respect to IN –.
(4) The output can be shorted to
either supply. Temperatures and/or supply voltages must be limited to make sure
that the maximum dissipation rate is not exceeded.