ZHCSM01AE 数据表 | 德州仪器 TI.com.cn

ZHCSM01AE February 2000 – September 2020 SN74LVC1G07

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DRY|6
- MPDS221F
DRL|5
- MPDS158D
DSF|6
- MPDS301G
DPW|5
- MPSS088
DCK|5
- MPDS025H
YZP|5
- MXBG018L
DBV|5
- MPDS018S
YZV|4
- MXBG052B

散热焊盘机械数据 (封装 | 引脚)

DRY|6
- QFND138E
DPW|5
- QFND567C

订购信息

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

			MIN	MAX	UNIT
V_CC	Supply voltage range		–0.5	6.5	V
V_I	Input voltage range⁽²⁾		–0.5	6.5	V
V_O	Voltage range applied to any output in the high-impedance or power-off state⁽²⁾		–0.5	6.5	V
V_O	Voltage range applied to any output in the high or low state⁽²⁾⁽³⁾		–0.5	6.5	V
I_IK	Input clamp current	V_I < 0		–50	mA
I_OK	Output clamp current	V_O < 0		–50	mA
I_O	Continuous output current			±50	mA
	Continuous current through V_CC or GND			±100	mA
T_stg	Storage temperature range		–65	150	°C
T_j	Junction temperature range			150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.

(3) The value of V_CC is provided in the Recommended Operating Conditions table.