ZHCSRU5F September   2005  – March 2023 SN65HVD50 , SN65HVD52 , SN65HVD53 , SN65HVD54 , SN65HVD55

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Available Options
  6. 6 Pin Configurations
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 Recommended Operating Conditions
    3. 7.3 Electrostatic Discharge Protection
    4. 7.4 Driver Electrical Characteristics
    5. 7.5 Driver Switching Characteristics
    6. 7.6 Receiver Electrical Characteristics
    7. 7.7 Receiver Switching Characteristics
    8. 7.8 Thermal Characteristics
    9. 7.9 Typical Characteristics
  8. 8 Parameter Measurement Information
  9. 9 Device Information
    1. 9.1 Ll-Power Standby Mode
    2. 9.2 Function Tables
    3. 9.3 Equivalent Input and Output Schematic Diagrams
  10. 10Application and Implementation
    1. 10.1 Thermal Characteristics of IC Packages
  11. 11Device and Documentation Support
    1. 11.1 接收文档更新通知
    2. 11.2 支持资源
    3. 11.3 商标
    4. 11.4 静电放电警告
    5. 11.5 术语表
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.6 Receiver Electrical Characteristics

over recommended operating conditions unless otherwise noted
PARAMETERTEST CONDITIONSMINTYP(1)MAXUNIT
VIT+Positive-going differential input threshold voltageIO = –8 mA–0.02V
VIT-Negative-going differential input threshold voltageIO = 8 mA–0.2
VhysHysteresis voltage (VIT+ - VIT-)50mV
VIKEnable-input clamp voltageII = –18 mA–1.5V
VOOutput voltageVID = 200 mV, IO = –8 mA, See Figure 8-84V
VID = –200 mV, IO = 8 mA, See Figure 8-80.3
IO(Z)High-impedance-state output currentVO = 0 or VCCRE at VCC–11μA
IA or IBBus input currentHVD50, HVD53,VA or VB = 12 VOther input
at 0 V		0.190.3mA
VA or VB = 12 V, VCC = 0 V0.240.4
VA or VB = -7 V–0.35–0.19
VA or VB = -7 V, VCC = 0 V–0.25–0.14
HVD51, HVD52, HVD54, HVD55VA or VB = 12 VOther input
at 0 V		0.050.1mA
VA or VB = 12 V, VCC = 0 V0.060.1
VA or VB = -7 V–0.1–0.05
VA or VB = -7 V, VCC = 0 V–0.1–0.03
IIHInput current, REVIH = 2 V–60μA
VIL = 0.8 V–60μA
CIDDifferential input capacitanceVID = 0.4 sin (4E6πt) + 0.5 V, DE at 0 V16pF
Supply Current
ICCSupply currentHVD50D at 0 V or VCC and No Load2.7mA
HVD51, HVD528
HVD53RE at 0 V, D at 0 V or VCC, DE at 0 V,
No load (Receiver enabled and
driver disabled)		2.3
HVD54, HVD552.9
HVD53, HVD54, HVD55RE at VCC, D at VCC, DE at 0 V,
No load (Receiver disabled and
driver disabled)		0.081μA
HVD53RE at 0 V, D at 0 V or VCC, DE at VCC,
No load (Receiver enabled and
driver enabled)		2.7mA
HVD54, HVD558
HVD53RE at VCC, D at 0 V or VCC, DE at VCC
No load (Receiver disabled and
driver enabled)		2.3
HVD54, HVD557.7
(1) All typical values are at 25°C and with a 5-V supply.