ZHCSVF9D May   1980  – March 2024 MC3487

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 Recommended Operating Conditions
    3. 5.3 Thermal Information
    4. 5.4 Electrical Characteristics
    5. 5.5 Switching Characteristics
  7. 6 Parameter Measurement Information
  8. 7 Device Functional Modes
  9. 8 Device and Documentation Support
    1. 8.1 接收文档更新通知
    2. 8.2 支持资源
    3. 8.3 Trademarks
    4. 8.4 静电放电警告
    5. 8.5 术语表
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • NS|16
  • N|16
  • D|16
散热焊盘机械数据 (封装 | 引脚)
订购信息

5.4 Electrical Characteristics

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN MAX UNIT
VIK Input clamp voltage II = -18 mA -1.5 V
VOH High-level output voltage VIL = 0.8 V, VIH = 2 V, IOH = -20 mA 2.5 V
VOL Low-level output voltage VIL = 0.8 V, VIH = 2 V, IOL = 48 mA 0.5 V
|VOD| Differential output voltage RL = 100 Ω See Figure 6-1 2
Δ|VOD| Change in magnitude of differential output voltage(1) RL = 100 Ω See Figure 6-1 ±0.4 V
VOC Common-mode output voltage(2) RL = 100 Ω See Figure 6-1 3 V
Δ|VOC| Change in magnitude of common-mode output voltage(1) RL = 100 Ω See Figure 6-1 ±0.4 V
IO Output current with power off VCC = 0 VO = 6 V 100 μA
VO = -0.25 V -100
IOZ High-impedance-state output current Output enables at 0.8 V VO = 2.7 V 100 μA
VO = 0.5 V -100
II Input current at maximum input voltage VI = 5.5 V 100 μA
IIH High-level input current VI = 2.7 V 50 μA
IIL Low-level input current VI = 0.5 V -400 μA
IOS Short-circuit output current(3) VI = 2 V -40 -140 mA
ICC Supply current (all drivers) Outputs disabled 105 mA
Outputs enabled, No load 85
(1) ∆|VOD| and ∆|VOC| are the changes in magnitude of VOD and VOC, respectively, that occur when the input is changed from a high level to a low level.
(2) In ANSI Standard TIA/EIA-422-B, VOC, which is the average of the two output voltages with respect to ground, is called output offset voltage, VOS.
(3) Only one output at a time should be shorted, and duration of the short circuit should not exceed one second.