ZHCSJT3B May   2019  – August 2020 LP5009 , LP5012

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Description (continued)
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Timing Characteristics
    7. 7.7 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 PWM Control for Each Channel
        1. 8.3.1.1 Independent Color Mixing Per RGB LED Module
        2. 8.3.1.2 Independent Intensity Control Per RGB LED Module
          1. 8.3.1.2.1 Intensity-Control Register Configuration
          2. 8.3.1.2.2 Logarithmic- or Linear-Scale Intensity Control
        3. 8.3.1.3 12-Bit, 29-kHz PWM Generator Per Channel
          1. 8.3.1.3.1 PWM Generator
        4. 8.3.1.4 PWM Phase-Shifting
      2. 8.3.2 LED Bank Control
      3. 8.3.3 Current Range Setting
      4. 8.3.4 Automatic Power-Save Mode
      5. 8.3.5 Protection Features
        1. 8.3.5.1 Thermal Shutdown
        2. 8.3.5.2 UVLO
    4. 8.4 Device Functional Modes
    5. 8.5 Programming
      1. 8.5.1 I2C Interface
        1. 8.5.1.1 Data Validity
        2. 8.5.1.2 Start and Stop Conditions
        3. 8.5.1.3 Transferring Data
        4. 8.5.1.4 I2C Slave Addressing
        5. 8.5.1.5 Control-Register Write Cycle
        6. 8.5.1.6 Control-Register Read Cycle
        7. 8.5.1.7 Auto-Increment Feature
    6. 8.6 Register Maps
      1.      45
      2. 8.6.1  DEVICE_CONFIG0 (Address = 0h) [reset = 0h]
      3. 8.6.2  DEVICE_CONFIG1 (Address = 1h) [reset = 3Ch]
      4. 8.6.3  LED_CONFIG0 (Address = 2h) [reset = 00h]
      5. 8.6.4  BANK_BRIGHTNESS (Address = 3h) [reset = FFh]
      6. 8.6.5  BANK_A_COLOR (Address = 4h) [reset = 00h]
      7. 8.6.6  BANK_B_COLOR (Address = 5h) [reset = 00h]
      8. 8.6.7  BANK_C_COLOR (Address = 6h) [reset = 00h]
      9. 8.6.8  LED0_BRIGHTNESS (Address = 7h) [reset = FFh]
      10. 8.6.9  LED1_BRIGHTNESS (Address = 8h) [reset = FFh]
      11. 8.6.10 LED2_BRIGHTNESS (Address = 9h) [reset = FFh]
      12. 8.6.11 LED3_BRIGHTNESS (Address = 0Ah) [reset = FFh]
      13. 8.6.12 OUT0_COLOR (Address = 0Bh) [reset = 00h]
      14. 8.6.13 OUT1_COLOR (Address = 0Ch) [reset = 00h]
      15. 8.6.14 OUT2_COLOR (Address = 0Dh) [reset = 00h]
      16. 8.6.15 OUT3_COLOR (Address = 0Eh) [reset = 00h]
      17. 8.6.16 OUT4_COLOR (Address = 0Fh) [reset = 00h]
      18. 8.6.17 OUT5_COLOR (Address = 10h) [reset = 00h]
      19. 8.6.18 OUT6_COLOR (Address = 11h) [reset = 00h]
      20. 8.6.19 OUT7_COLOR (Address = 12h) [reset = 00h]
      21. 8.6.20 OUT8_COLOR (Address = 13h) [reset = 00h]
      22. 8.6.21 OUT9_COLOR (Address = 14h) [reset = 00h]
      23. 8.6.22 OUT10_COLOR (Address = 15h) [reset = 00h]
      24. 8.6.23 OUT11_COLOR (Address = 16h) [reset = 00h]
      25. 8.6.24 RESET (Address = 17h) [reset = 00h]
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Examples
  12. 12Device and Documentation Support
    1. 12.1 Related Links
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 支持资源
    4. 12.4 Trademarks
    5. 12.5 静电放电警告
    6. 12.6 术语表
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.4 Device Functional Modes

GUID-C5239728-F74B-4CA9-A03F-7CAD163BBAC6-low.gifFigure 8-7 Functional Modes
  • INITIALIZATION: The device enters into INITIALIZATION mode when EN = H. In this mode, all the registers are reset. Entry can also be from any state, if the RESET (register) = FFh or UVLO is active.
  • NORMAL: The device enters the NORMAL mode when Chip_EN (register) = 1. ICC is 10 mA (typical).
  • POWER SAVE: The device automatically enters the POWER SAVE mode when Power_Save_EN (register) = 1 and all the LEDs are off for a duration of > 30 ms. In POWER SAVE mode, analog blocks are disabled to minimize power consumption, but the registers retain the data and keep it available via I2C. ICC is 10 µA (typical). In case of any I2C command to this device, it returns to the NORMAL mode.
  • SHUTDOWN: The device enters into SHUTDOWN mode from all states on VCC power up or when EN = L. ICC is < 1 µA (maximum).
  • STANDBY: The device enters the STANDBY mode when Chip_EN (register) = 0. In this mode, all the OUTx pins are shut down, but the registers retain the data and keep it available via I2C. STANDBY is the low-power-consumption mode, when all circuit functions are disabled. ICC is 10 µA (typical).
  • THERMAL SHUTDOWN: The device automatically enters the THERMAL SHUTDOWN mode when the junction temperature exceeds 160°C (typical). In this mode, all the OUTx outputs are shut down. If the junction temperature decreases below 145°C (typical), the device returns to the NORMAL mode.