ZHCSJT3B May   2019  – August 2020 LP5009 , LP5012

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Description (continued)
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Timing Characteristics
    7. 7.7 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 PWM Control for Each Channel
        1. 8.3.1.1 Independent Color Mixing Per RGB LED Module
        2. 8.3.1.2 Independent Intensity Control Per RGB LED Module
          1. 8.3.1.2.1 Intensity-Control Register Configuration
          2. 8.3.1.2.2 Logarithmic- or Linear-Scale Intensity Control
        3. 8.3.1.3 12-Bit, 29-kHz PWM Generator Per Channel
          1. 8.3.1.3.1 PWM Generator
        4. 8.3.1.4 PWM Phase-Shifting
      2. 8.3.2 LED Bank Control
      3. 8.3.3 Current Range Setting
      4. 8.3.4 Automatic Power-Save Mode
      5. 8.3.5 Protection Features
        1. 8.3.5.1 Thermal Shutdown
        2. 8.3.5.2 UVLO
    4. 8.4 Device Functional Modes
    5. 8.5 Programming
      1. 8.5.1 I2C Interface
        1. 8.5.1.1 Data Validity
        2. 8.5.1.2 Start and Stop Conditions
        3. 8.5.1.3 Transferring Data
        4. 8.5.1.4 I2C Slave Addressing
        5. 8.5.1.5 Control-Register Write Cycle
        6. 8.5.1.6 Control-Register Read Cycle
        7. 8.5.1.7 Auto-Increment Feature
    6. 8.6 Register Maps
      1.      45
      2. 8.6.1  DEVICE_CONFIG0 (Address = 0h) [reset = 0h]
      3. 8.6.2  DEVICE_CONFIG1 (Address = 1h) [reset = 3Ch]
      4. 8.6.3  LED_CONFIG0 (Address = 2h) [reset = 00h]
      5. 8.6.4  BANK_BRIGHTNESS (Address = 3h) [reset = FFh]
      6. 8.6.5  BANK_A_COLOR (Address = 4h) [reset = 00h]
      7. 8.6.6  BANK_B_COLOR (Address = 5h) [reset = 00h]
      8. 8.6.7  BANK_C_COLOR (Address = 6h) [reset = 00h]
      9. 8.6.8  LED0_BRIGHTNESS (Address = 7h) [reset = FFh]
      10. 8.6.9  LED1_BRIGHTNESS (Address = 8h) [reset = FFh]
      11. 8.6.10 LED2_BRIGHTNESS (Address = 9h) [reset = FFh]
      12. 8.6.11 LED3_BRIGHTNESS (Address = 0Ah) [reset = FFh]
      13. 8.6.12 OUT0_COLOR (Address = 0Bh) [reset = 00h]
      14. 8.6.13 OUT1_COLOR (Address = 0Ch) [reset = 00h]
      15. 8.6.14 OUT2_COLOR (Address = 0Dh) [reset = 00h]
      16. 8.6.15 OUT3_COLOR (Address = 0Eh) [reset = 00h]
      17. 8.6.16 OUT4_COLOR (Address = 0Fh) [reset = 00h]
      18. 8.6.17 OUT5_COLOR (Address = 10h) [reset = 00h]
      19. 8.6.18 OUT6_COLOR (Address = 11h) [reset = 00h]
      20. 8.6.19 OUT7_COLOR (Address = 12h) [reset = 00h]
      21. 8.6.20 OUT8_COLOR (Address = 13h) [reset = 00h]
      22. 8.6.21 OUT9_COLOR (Address = 14h) [reset = 00h]
      23. 8.6.22 OUT10_COLOR (Address = 15h) [reset = 00h]
      24. 8.6.23 OUT11_COLOR (Address = 16h) [reset = 00h]
      25. 8.6.24 RESET (Address = 17h) [reset = 00h]
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Examples
  12. 12Device and Documentation Support
    1. 12.1 Related Links
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 支持资源
    4. 12.4 Trademarks
    5. 12.5 静电放电警告
    6. 12.6 术语表
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.1 Overview

The LP50xx device is an 9- or 12-channel constant-current-sink LED driver. The LP50xx device includes all necessary power rails, an on-chip oscillator, and a two-wire serial I2C interface. The maximum constant-current value of all channels is set by a single external resistor. Two hardware address pins allow up to four devices on the same bus. An automatic power-saving mode is implemented to keep the total current consumption under 10 µA, which makes the LP50xx device a potential choice for battery-powered end equipment.

The LP50xx device is optimized for RGB LEDs regarding both live effects and software efforts. The LP50xx device controls each LED output with 12-bit PWM resolution at 29-kHz switching frequency, which helps achieve a smooth dimming effect and eliminates audible noise. The independent color-mixing and intensity-control registers make the software coding straightforward. When targeting a fade-in, fade-out type breathing effect, the global RGB bank control reduces the microcontroller loading significantly. The LP50xx device also implements a PWM phase-shifting function to help reduce the input power budget when LEDs turn on simultaneously.