ZHCSH86B December   2017  – February 2019 LMH5401-SP

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     Device Images
      1.      LMH5401-SP 小信号频率响应
      2.      LMH5401-SP 驱动 ADC12D1620QML
  4. 4 修订历史记录
  5. 5 说明 （续）
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics: VS = 5 V
    6. 7.6 Electrical Characteristics: VS = 3.3 V
    7. 7.7 Typical Characteristics: 5 V
    8. 7.8 Typical Characteristics: 3.3 V
  8. 8 Parameter Measurement Information
    1. 8.1  Output Reference Nodes and Gain Nomenclature
    2. 8.2  ATE Testing and DC Measurements
    3. 8.3  Frequency Response
    4. 8.4  S-Parameters
    5. 8.5  Frequency Response with Capacitive Load
    6. 8.6  Distortion
    7. 8.7  Noise Figure
    8. 8.8  Pulse Response, Slew Rate, and Overdrive Recovery
    9. 8.9  Power Down
    10. 8.10 VCM Frequency Response
    11. 8.11 Test Schematics
  9. 9 Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1 Fully-Differential Amplifier
      2. 9.3.2 Operations for Single-Ended to Differential Signals
        1. 9.3.2.1 AC-Coupled Signal Path Considerations for Single-Ended Input to Differential Output Conversion
        2. 9.3.2.2 DC-Coupled Input Signal Path Considerations for SE-DE Conversions
        3. 9.3.2.3 Resistor Design Equations for Single-to-Differential Applications
        4. 9.3.2.4 Input Impedance Calculations
      3. 9.3.3 Differential-to-Differential Signals
        1. 9.3.3.1 AC-Coupled, Differential-Input to Differential-Output Design Issues
        2. 9.3.3.2 DC-Coupled, Differential-Input to Differential-Output Design Issues
      4. 9.3.4 Output Common-Mode Voltage
    4. 9.4 Device Functional Modes
      1. 9.4.1 Operation With a Split Supply
      2. 9.4.2 Operation With a Single Supply
  10. 10Application and Implementation
    1. 10.1 Application Information
      1. 10.1.1 Stability, Noise Gain, and Signal Gain
      2. 10.1.2 Input and Output Headroom Considerations
      3. 10.1.3 Noise Analysis
      4. 10.1.4 Noise Figure
      5. 10.1.5 Thermal Considerations
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
      2. 10.2.2 Detailed Design Procedure
        1. 10.2.2.1 Driving Matched Loads
        2. 10.2.2.2 Driving Unmatched Loads For Lower Loss
        3. 10.2.2.3 Driving Capacitive Loads
        4. 10.2.2.4 Driving ADCs
          1. 10.2.2.4.1 SNR Considerations
          2. 10.2.2.4.2 SFDR Considerations
          3. 10.2.2.4.3 ADC Input Common-Mode Voltage Considerations—AC-Coupled Input
          4. 10.2.2.4.4 ADC Input Common-Mode Voltage Considerations—DC-Coupled Input
        5. 10.2.2.5 GSPS ADC Driver
        6. 10.2.2.6 Common-Mode Voltage Correction
        7. 10.2.2.7 Active Balun
      3. 10.2.3 Application Curves
    3. 10.3 Do's and Don'ts
      1. 10.3.1 Do:
      2. 10.3.2 Don't:
  11. 11Power Supply Recommendations
    1. 11.1 Supply Voltage
    2. 11.2 Single Supply
    3. 11.3 Split Supply
    4. 11.4 Supply Decoupling
  12. 12Layout
    1. 12.1 Layout Guidelines
    2. 12.2 Layout Example
  13. 13器件和文档支持
    1. 13.1 器件支持
      1. 13.1.1 器件命名规则
    2. 13.2 文档支持
      1. 13.2.1 相关文档
    3. 13.3 接收文档更新通知
    4. 13.4 社区资源
    5. 13.5 商标
    6. 13.6 静电放电警告
    7. 13.7 术语表
  14. 14机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.7 Typical Characteristics: 5 V

at TA = 25°C, VS+ = 5 V; VS– = 0 V; VCM = 2.5 V, RLtotal = 200-Ω differential(3) (RO = 40 Ω each), Gp = 8 dB (Gv = 17 dB), single-ended input and differential output, and input and output pins referenced to mid supply (unless otherwise noted); measured using an EVM as discussed in the section (see Figure 54 to Figure 57)
LMH5401-SP D051_LOWGAIN_REPL_SBOS849.gif Figure 1. SE-DE Small Signal Frequency Response for Low Gain
LMH5401-SP SBOS849_SEC7p7_D002_vsRLOAD.gif
Figure 3. SE-DE Small Signal Frequency Response vs Rload
LMH5401-SP SBOS849_SEC7p7_D004_vsTEMP.gif
Figure 5. SE-DE Small Signal Frequency Response vs Temperature
LMH5401-SP D052_DIFF-DIFF_S21_SBOS849.gif
Figure 7. DIFF-DIFF Small Signal Frequency Response vs Gain
LMH5401-SP SBOS849_SEC7p7_D006_AMPL_IMB.gif
Figure 9. SE-DE Amplitude Imbalance
LMH5401-SP SBOS849_SEC7p7_D008_TOTAL_IMB.gif
Figure 11. SE-DE Total Imbalance
LMH5401-SP SBOS849_SEC7p7_D010_HD3vsFREQ.gif
Figure 13. SE-DE 3rd Order Harmonic Distortion vs Frequency
LMH5401-SP D055_SE-DIFF_HD3_SBOS849.gif
Figure 15. DE-SE 3rd Order Harmonic Distortion vs Frequency
LMH5401-SP SBOS849_SEC7p7_D012_HD3vsVOUT.gif
Figure 17. SE-DE 3rd Order Harmonic Distortion vs Vout
LMH5401-SP SBOS849_SEC7p7_D014_HD3vsVCMOUT.gif
Figure 19. SE-DE 3rd Order Harmonic Distortion vs Output Common Mode Voltage
LMH5401-SP SBOS849_SEC7p7_D016_HD3vsTEMP.gif
Figure 21. SE-DE 3rd Order Harmonic Distortion vs Temperature
LMH5401-SP SBOS849_SEC7p7_D018_IMD3vsFREQ.gif
Figure 23. SE-DE 3rd Order Intermodulation Distortion vs Frequency
LMH5401-SP SBOS849_SEC7p7_D021_IMD3vsVOUTMATCH.gif Figure 25. SE-DE 3rd Order Intermodulation Distortion vs Vout (Matched Load)
LMH5401-SP SBOS849_SEC7p7_D023_OIP3.gif Figure 27. SE-DE 3rd Order Intermodulation Distortion vs Vout (Unmatched Load)
LMH5401-SP SBOS849_SEC7p7_D025_NF.gif
Figure 29. SE-DE Noise Figure vs Frequency
LMH5401-SP TC_C026_Pulse_5V_CM_sbos849.gif
VCM @ AMPOUT Node; VCM = (Vo+ + Vo–) / 2
Figure 31. SE-DE Output Common Mode Pulse Response
LMH5401-SP TC_C028_Overdrive_5v_sbos849.gif
Figure 33. Overdrive Recovery
LMH5401-SP SBOS849_SEC7p7_D001_vsGAIN.gif
Figure 2. SE-DE Small Signal Frequency Response vs Gain
LMH5401-SP SBOS849_SEC7p7_D003_vsCLOAD.gif
Figure 4. SE-DE Small Signal Frequency Response vs Cload
LMH5401-SP SBOS849_SEC7p7_D005_SPARAMS.gif
Figure 6. SE-DE Small Signal S-Parameters
LMH5401-SP D053_DIFF-DIFF_SPARAMS_SBOS849.gif
Figure 8. DIFF-DIFF Small Signal S-Parameters
LMH5401-SP SBOS849_SEC7p7_D007_PHASE_IMB.gif
Figure 10. SE-DE Phase Imbalance
LMH5401-SP SBOS849_SEC7p7_D009_HD2vsFREQ.gif
Figure 12. SE-DE 2nd Order Harmonic Distortion vs Frequency
LMH5401-SP D054_SE-DIFF_HD2_SBOS849.gif
Figure 14. DE-SE 2nd Order Harmonic Distortion vs Frequency
LMH5401-SP SBOS849_SEC7p7_D011_HD2vsVOUT.gif
Figure 16. SE-DE 2nd Order Harmonic Distortion vs Vout
LMH5401-SP SBOS849_SEC7p7_D013_HD2vsVCMOUT.gif
Figure 18. SE-DE 2nd Order Harmonic Distortion vs Output Common Mode Voltage
LMH5401-SP SBOS849_SEC7p7_D015_HD2vsTEMP.gif
Figure 20. SE-DE 2nd Order Harmonic Distortion vs Temperature
LMH5401-SP SBOS849_SEC7p7_D017_IMD2vsFREQ.gif
Figure 22. SE-DE 2nd Order Intermodulation Distortion vs Frequency
LMH5401-SP SBOS849_SEC7p7_D020_OIP2vsFREQ.gif
Figure 24. SE-DE Output 2nd Order Intercept Point
LMH5401-SP SBOS849_SEC7p7_D022_IMD3vsVOUTMISMATCH.gif
Figure 26. SE-DE Output 3rd Order Intercept Point
LMH5401-SP TC_C023_voltage_noise_sbos710.png
Figure 28. Input-Referred Voltage Noise
LMH5401-SP TC_C025_Pulse_5V_Diff_sbos849.gif
Figure 30. SE-DE Output Signal Pulse Response
LMH5401-SP TC_C027_PDTime_5V_sbos849.gif
Figure 32. Power Down Timing