ZHCSKC6D October   2019  – January 2023 LMH32401

PRODUCTION DATA  

  1. 特性
  2. 应用
  3. 说明
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics: Gain = 2 kΩ
    6. 6.6 Electrical Characteristics: Gain = 20 kΩ
    7. 6.7 Electrical Characteristics: Both Gains
    8. 6.8 Electrical Characteristics: Logic Threshold and Switching Characteristics
    9. 6.9 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Switched Gain Transimpedance Amplifier
      2. 7.3.2 Clamping and Input Protection
      3. 7.3.3 ESD Protection
      4. 7.3.4 Differential Output Stage
    4. 7.4 Device Functional Modes
      1. 7.4.1 Ambient Light Cancellation (ALC) Mode
      2. 7.4.2 Power-Down Mode (Multiplexer Mode)
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Development Support
    2. 11.2 Documentation Support
      1. 11.2.1 Related Documentation
    3. 11.3 接收文档更新通知
    4. 11.4 支持资源
    5. 11.5 Trademarks
    6. 11.6 静电放电警告
    7. 11.7 术语表
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • RGT|16
  • Y|0
散热焊盘机械数据 (封装 | 引脚)
订购信息

Application Information

The differential outputs of the LMH32401 device can directly drive a high-speed differential input ADC. Figure 8-1 shows the LMH32401 differential outputs directly driving the ADC12QJ1600. The effective signal gain between the TIA input and the ADC input is 2 kΩ or 20 kΩ when driving an ADC with a 100-Ω differential input impedance (RADC_IN = 50 Ω). Equation 2 gives the effective signal gain between the TIA input and the ADC input when driving an ADC with any other value of differential input impedance (RADC_IN ≠ 50 Ω).

GUID-6C792DC2-EE56-4565-9C7E-97E2374E3B4C-low.gif Figure 8-1 LMH32401 to ADC Interface
Equation 2. GUID-F7C5FCDC-72D4-43B9-AE21-971F943C971B-low.gif

Where:

  • AV = Differential gain from the TIA input to the ADC input
  • RADC_IN = Input resistance of the ADC

Figure 8-2 shows a matching resistor network between the LMH32401 output and the ADC12QJ1600 input. The matching network is needed to prevent signal reflections when the signal path between the LMH32401 and ADC is very long. Equation 3 gives the effective gain from the TIA input to the ADC input when using a matching resistor network.

GUID-08B171BD-EEBD-4B5D-A01A-A0C8D12DFE9B-low.gif Figure 8-2 LMH32401 to ADC Interface with a Matching Resistor Network
Equation 3. GUID-4FCA8205-CB77-4FFE-8285-73DBD0EA06F9-low.gif

Where:

  • AV = Gain from the TIA input to the ADC input
  • RADC_IN = Differential input resistance of the ADC
  • RISO = Series resistance between the TIA and ADC

Equation 4 gives the voltage to be applied at the VOD pin (pin 9) if a certain differential offset voltage (VOD) is needed at the ADC input for the circuit in Figure 8-2.

Equation 4. GUID-62A6762D-58E5-407F-AED4-5179AC4F0E9A-low.gif

Where:

  • VOD = Voltage applied at pin 9
  • VOD = Desired differential offset voltage at the ADC input
  • RADC_IN = Differential input resistance of the ADC
  • RISO = Series resistance between the TIA and ADC