7.5 LMH0324 Register Map
The LMH0324 register set definition is divided into two register pages. These register pages are used to control different aspects of the LMH0324 functionality. A brief summary of the pages is shown below:
- Share Register Page: This page corresponds to global parameters, such as LMH0324 device ID. This is the default page at start-up.
- CableEQ/Drivers Register Page: This page corresponds to IN0 Cable EQ and both OUT0 and OUT1 driver output settings. Access this page by setting Reg 0xFF[2:0] = 101’b.
Please note the following about the LMH0324 default register values in the register map:
- Default register values were read after power-up with no active inputs applied to IN0.
- Default register values for Reserved "Read-Only" bits may vary dynamically from part to part.