ZHCSQ83A March   2022  – October 2022 INA851

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Related Products
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Adjustable Gain Setting
        1. 8.3.1.1 Gain Drift
      2. 8.3.2 Offset Voltage
      3. 8.3.3 Input Common-Mode Range
      4. 8.3.4 Input Protection
      5. 8.3.5 Output Clamping
      6. 8.3.6 Low Noise
    4. 8.4 Device Functional Modes
  9. 9 Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 Output Common-Mode Pin
      2. 9.1.2 Output-Stage Gain Selection and Noise-Gain Shaping
      3. 9.1.3 Input Bias Current Return Path
      4. 9.1.4 Thermal Effects due to Power Dissipation
    2. 9.2 Typical Applications
      1. 9.2.1 Three-Pin Programmable Logic Controller (PLC)
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
        3. 9.2.1.3 应用曲线
      2. 9.2.2 20-Bit, 1-MSPS ADS8900B Driver Circuit With FDA Noise Filter
        1. 9.2.2.1 Design Requirements
        2. 9.2.2.2 Application Curves
      3. 9.2.3 24-Bit, 200 kSPS, Delta-Sigma ADS127L11 ADC Driver Circuit With FDA Noise Filter
        1. 9.2.3.1 Design Requirements
        2. 9.2.3.2 Application Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  10. 10Device and Documentation Support
    1. 10.1 Device Support
      1. 10.1.1 Development Support
        1. 10.1.1.1 PSpice® for TI
        2. 10.1.1.2 TINA-TI™ Simulation Software (Free Download)
    2. 10.2 Documentation Support
      1. 10.2.1 Related Documentation
    3. 10.3 接收文档更新通知
    4. 10.4 支持资源
    5. 10.5 Trademarks
    6. 10.6 Electrostatic Discharge Caution
    7. 10.7 术语表
  11. 11Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

9.2.3.2 Application Curves

Table 9-4 and Table 9-5 show the typical signal-to-noise (SNR) and total harmonic distortion (THD) of the INA851 driving the ADS127L11 delta-sigma ADC at full-scale range and at different gain configurations.

The RC filter combination is dimensioned such to help attenuate the nonlinear charge kickback and optimize for best THD performance. The ADC requires a low impedance input for lowest distortion performance; however, driving heavier loads degrades the phase margin of the INA851. Use a feedback capacitor (CFB) in the range of 47 pF to 100 pF to optimize for stability versus THD performance. Low voltage-coefficient C0G capacitors are used everywhere in the signal path (CFB, CDIFF, CCM) for their low distortion properties.

For other bandwidth requirements, adjust the feedback capacitor accordingly and verify the circuit performance using a SPICE simulation using INA851 TINA-TI™ SPICE Model. Confirm that the desired circuit is stable; that is, the FDA has more than a 45º phase margin.

(1) Used 1 × input range for best THD. All other cases use 2 × input range.
Table 9-4 INA851 + ADS127L11 (Sinc4 Filter) FFT Data Summary
INPUT AMPLITUDE (Vpk) RG RESISTOR (Ω) GIN (V/V) GOUT (V/V) SNR (dB) THD (dB) ENOB (Bits)
23.7378 None 1 0.2 106.8 –116.0 17.36
4.7476 None 1 1 105.9 –122.0 17.28
2.3738(1) 1500 5 0.2 107.2 –113.8 17.25
0.2374 316 20 1 102.5 –112.0 16.59
0.0475 60.4 100 1 92.5 –99.0 14.81
GUID-20221010-SS0I-PNNN-GXCH-90GD5XSZVWKS-low.png
G = 0.2 V/V, fIN = 1 kHz, SNR = 106.75 dB, THD = –115.95 dB
Figure 9-10 Noise Performance FFT Plots with Sinc4 Filter for G = 0.2 V/V
GUID-20221010-SS0I-SXQ5-3MN5-BQD2R1LSXFTR-low.png
G = 0.2 V/V, fIN = 1 kHz, SNR = 105.88 dB, THD = –122.00 dB
Figure 9-11 Noise Performance FFT Plots with Sinc4 Filter for G = 1 V/V
Table 9-5 INA851 + ADS127L11 (Wideband Filter) FFT Data Summary
INPUT AMPLITUDE (Vpk) RG RESISTOR (Ω) GIN (V/V) GOUT (V/V) SNR (dB) THD (dB) ENOB (Bits)
23.76015 None 1 0.2 105.3 –116.2 17.14
4.7476 None 1 1 103.1 –120.0 16.81
2.3738 1500 5 0.2 104.2 –113.0 16.85
0.2360 316 20 1 99.0 –112.0 16.08
0.0472 60.4 100 1 89.3 –99.0 14.40
GUID-20221011-SS0I-V2RC-QFFW-CBW0KQGLLXJH-low.png
G = 0.2 V/V, fIN = 1 kHz, SNR = 105.29 dB, THD = –116.21 dB
Figure 9-12 Noise Performance FFT Plots with Wideband Filter for G = 0.2 V/V
GUID-20221011-SS0I-JFKQ-FFJ5-VBMHWTVNNFQK-low.png
G = 1 V/V, fIN = 1 kHz, SNR = 103.07 dB, THD = –120.01 dB
Figure 9-13 Noise Performance FFT Plots with Wideband Filter for G = 1 V/V