SLUSG28 August   2025 BQ25176K

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Device Power Up from Input Source
        1. 6.3.1.1 ISET Pin Detection
        2. 6.3.1.2 VSET Pin Detection
        3. 6.3.1.3 Charger Power Up
      2. 6.3.2 Battery Charging Features
        1. 6.3.2.1 Lithium-Ion Battery Charging Profile
        2. 6.3.2.2 Input Voltage Based Dynamic Power Management (VINDPM)
        3. 6.3.2.3 Charge Termination and Battery Recharge
        4. 6.3.2.4 Charging Safety Timers
        5. 6.3.2.5 Battery Temperature Qualification (TS Pin)
      3. 6.3.3 Status Outputs ( PG, STAT)
        1. 6.3.3.1 Power Good Indicator (PG Pin)
        2. 6.3.3.2 Charging Status Indicator (STAT)
      4. 6.3.4 Protection Features
        1. 6.3.4.1 Input Overvoltage Protection (VIN_OV)
        2. 6.3.4.2 Output Overvoltage Protection (VOUT_OVP)
        3. 6.3.4.3 Output Overcurrent Protection (IOUT_OCP)
        4. 6.3.4.4 Thermal Regulation and Thermal Shutdown (TREG and TSHUT)
    4. 6.4 Device Functional Modes
      1. 6.4.1 Shutdown or Undervoltage Lockout (UVLO)
      2. 6.4.2 Sleep Mode
      3. 6.4.3 Active Mode
        1. 6.4.3.1 Standby Mode
      4. 6.4.4 Fault Mode
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Applications
      1. 7.2.1 Li-Ion Charger Design Example
        1. 7.2.1.1 Design Requirements
        2. 7.2.1.2 Detailed Design Procedure
        3. 7.2.1.3 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Third-Party Products Disclaimer
    2. 8.2 Receiving Notification of Documentation Updates
    3. 8.3 Support Resources
    4. 8.4 Trademarks
    5. 8.5 Electrostatic Discharge Caution
    6. 8.6 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • DSG|8
散热焊盘机械数据 (封装 | 引脚)
订购信息

6.3.4.3 Output Overcurrent Protection (IOUT_OCP)

During normal operation, the OUT current should be regulated to the ISET programmed value. However, if a short circuit occurs on the ISET pin, the OUT current may rise to an unintended level. If the current at the OUT pin exceeds IOUT_OCP, the device turns off after a deglitch, tOUT_OCP_DGL. The safety timer resets the count, and the device remains latched off. An input supply or TS pin toggle is required to restart operation.

BQ25176K Overcurrent Protection Figure 6-4 Overcurrent Protection