SBAU320 July   2018 AMC1035 , AMC1035-Q1

 

  1.   AMC1035 Evaluation Module
    1. 1 EVM Overview
      1. 1.1 Features
      2. 1.2 Introduction
      3.      Trademarks
    2. 2 Analog Interface
    3. 3 Power Supply
    4. 4 Output Reference
    5. 5 Digital Interface
    6. 6 Manchester Coding Enabled
    7. 7 General Operation Tables
    8. 8 BOM, Schematic, and Layout
      1. 8.1 Bill of Materials
      2. 8.2 Schematic
      3. 8.3 PCB Layout

2 Analog Interface

The input to the AMC1035EVM is routed from a two-wire screw terminal at J2. This screw terminal gives the user access to the inputs, AINP and AINN, of the AMC1035 through a low pass filter created by R1, R2, and C2. The input circuit for the AMC1035EVM is shown in Figure 1 below.