ZHCSEO1C March   2012  – February 2016 TPS65177 , TPS65177A

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 修订历史记录
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 I2C Interface Timing Characteristics
    7. 6.7 I2C Timing Diagram
    8. 6.8 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Power-Up
        1. 7.3.1.1 TPS65177
        2. 7.3.1.2 TPS65177A
      2. 7.3.2 Power-Down
      3. 7.3.3 Thermal Shutdown
      4. 7.3.4 Undervoltage Lockout
      5. 7.3.5 Short-Circuit and Overload Protection
        1. 7.3.5.1 Boost Converter (V(AVDD)):
        2. 7.3.5.2 Buck 1 Converter (V(IO)):
        3. 7.3.5.3 Buck 2 Converter (V(CORE)):
        4. 7.3.5.4 Buck 3 Converter (V(HAVDD)):
        5. 7.3.5.5 Positive Charge-Pump Controller (V(GH)):
        6. 7.3.5.6 Negative Charge-Pump Controller (V(GL)):
    4. 7.4 Device Functional Modes
      1. 7.4.1 Boost Converter (V(AVDD))
        1. 7.4.1.1 Soft-Start
        2. 7.4.1.2 Compensation
        3. 7.4.1.3 Setting the Output Voltage V(AVDD)
        4. 7.4.1.4 High Voltage Stress Mode (HVS)
        5. 7.4.1.5 Programmable Current Limit
        6. 7.4.1.6 Design Procedure
        7. 7.4.1.7 Inductor Selection
        8. 7.4.1.8 Rectifier Diode Selection
          1. 7.4.1.8.1 Diode Type
          2. 7.4.1.8.2 Forward Voltage
          3. 7.4.1.8.3 Reverse Voltage
          4. 7.4.1.8.4 Thermal Characteristics
        9. 7.4.1.9 Output Capacitor Selection
      2. 7.4.2 Buck 1 Converter (V(IO))
        1. 7.4.2.1 Soft-Start
        2. 7.4.2.2 Setting the Output Voltage V(IO)
        3. 7.4.2.3 Design Procedure
        4. 7.4.2.4 Inductor Selection
        5. 7.4.2.5 Rectifier Diode Selection
          1. 7.4.2.5.1 Diode Type
          2. 7.4.2.5.2 Forward Voltage
          3. 7.4.2.5.3 Reverse Voltage
          4. 7.4.2.5.4 Forward Current
          5. 7.4.2.5.5 Thermal Characteristics
        6. 7.4.2.6 Output Capacitor Selection
      3. 7.4.3 BUCK 2 CONVERTER (V(CORE))
        1. 7.4.3.1 Soft-Start
        2. 7.4.3.2 Setting the Output Voltage V(CORE)
        3. 7.4.3.3 Design Procedure
        4. 7.4.3.4 Inductor Selection
        5. 7.4.3.5 Output Capacitor Selection
      4. 7.4.4 Buck 3 Converter (V(HAVDD))
        1. 7.4.4.1 Soft-Start
        2. 7.4.4.2 Setting the Output Voltage V(HAVDD)
        3. 7.4.4.3 High Voltage Stress Mode (HVS)
        4. 7.4.4.4 Design Procedure
        5. 7.4.4.5 Inductor Selection
        6. 7.4.4.6 Output Capacitor Selection
      5. 7.4.5 Positive Charge Pump Controller (V(GH)) with Temperature Compensation
        1. 7.4.5.1 Soft-Start
        2. 7.4.5.2 Setting the Output Voltage V(GH)
        3. 7.4.5.3 Design Procedure
        4. 7.4.5.4 Output Capacitor Selection
      6. 7.4.6 Negative Charge Pump Controller (V(GL))
        1. 7.4.6.1 Soft-Start
        2. 7.4.6.2 Setting the Output Voltage V(GL)
        3. 7.4.6.3 Design Procedure
        4. 7.4.6.4 Output Capacitor Selection
    5. 7.5 Gate Pulse Modulation (V(GHM))
    6. 7.6 Programming
      1. 7.6.1  I2C Serial Interface Description
      2. 7.6.2  Memory Description
      3. 7.6.3  Read / Write Description
      4. 7.6.4  Write Operation
        1. 7.6.4.1 Write Single Byte to the DAC Register (DR):
        2. 7.6.4.2 Write Multiple Bytes to the DAC Register (DR):
        3. 7.6.4.3 Write All DAC Register (DR) Data to EEPROM (EE):
      5. 7.6.5  READ OPERATION
        1. 7.6.5.1 Read single data from DAC register (DR):
        2. 7.6.5.2 Read Multiple Data from DAC Register (DR):
        3. 7.6.5.3 Read Single Data to EEPROM (EE):
        4. 7.6.5.4 Read Multiple Data to EEPROM (EE):
      6. 7.6.6  Write Single Data to DAC:
      7. 7.6.7  Write Multiple Data to DAC (Auto Increment Address):
      8. 7.6.8  Write all DAC Data to EEPROM:
      9. 7.6.9  Read Single Data From DAC / EEPROM:
      10. 7.6.10 Read Multiple Data fFom DAC / EEPROM (Auto Increment Address):
    7. 7.7 Register Map
      1. 7.7.1 Registers and DAC Settings
        1. 7.7.1.1  Channel Register (with factory value) - 00h (00h)
        2. 7.7.1.2  Boost Output Voltage V(AVDD) Register (with factory value) - 01h (0Fh)
        3. 7.7.1.3  Boost HVS Offset Voltage Register (with factory value) - 02h (05h)
        4. 7.7.1.4  Boost Current Limit Negative Offset Current Register (with factory value) - 03h (00h)
        5. 7.7.1.5  Boost Soft-start Time Register (with factory value) - 04h (00h)
        6. 7.7.1.6  Buck 1 Output Voltage V(IO) Register (with factory value) - 05h (03h):
        7. 7.7.1.7  Buck 2 Output Voltage V(CORE) Register (with factory value) - 06h (02h)
        8. 7.7.1.8  Buck 3 Output Voltage V(HAVDD) Register (with factory value) - 07h (1Bh)
        9. 7.7.1.9  Pos. Charge Pump Low Output Voltage V(GH_L) Register (with factory value) - 08h (08h):
        10. 7.7.1.10 Positive Charge Pump Low Output Voltage V(GH_L) to V(GH_H) Positive Offset Voltage V(GH_OFS) Register (with factory value) - 09h (04h):
        11. 7.7.1.11 Gate Pulse Modulation Limit Voltage Register (with factory value) - 0Ah (00h)
        12. 7.7.1.12 Negative Charge Pump Output Voltage V(GL) Register (with factory value) - 0Bh (04h)
        13. 7.7.1.13 Buck 3 HVS Offset Voltage Register (with factory value) - 0Ch (00h):
        14. 7.7.1.14 Memory Write Remain Time Register (with factory value) - FEh (0Fh):
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
    3. 8.3 System Examples
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guideline
    2. 10.2 Layout Example
  11. 11器件和文档支持
    1. 11.1 相关链接
    2. 11.2 Third-Party Products Disclaimer
    3. 11.3 社区资源
    4. 11.4 商标
    5. 11.5 静电放电警告
    6. 11.6 Glossary
  12. 12机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

5 Pin Configuration and Functions

RHA Package
40 Pin (VQFN)
Top View
TPS65177 TPS65177A Pinout.gif

Pin Functions

PIN TYPE DESCRIPTION
NAME NO.
INBK1 1, 2 — Buck 1 converter (V(IO)) supply pin. This pin is internally connected to INBK3. Place a buffer capacitor close to this pin.
NC 3 — Not connected.
SDA 4 I / O I2C data pin.
SCL 5 I I2C clock pin.
A0 6 I I2C address select pin.
HVS 7 I Boost and Buck 3 converter High Voltage Stress Mode enable pin.
INVL 8 — Internal logic supply pin. Place a buffer capacitor close to this pin.
AGND 9 — Analog Ground pin. Internal circuitry uses this ground.
COMP 10 I / O Boost converter (V(AVDD)) compensation pin.
VL 11 I / O Internal 5 V regulator output pin. Connect a buffer capacitor to this pin.
NTC 12 I Thermal Resistor sense pin.
PGND1 13, 14 — Boost converter (V(AVDD)) Power Ground pin.
SW 15, 16 O Boost converter (V(AVDD)) switch pin. Avoid long traces to the diode and inductor because this trace carries switching waveforms that generate noise.
SWI 17 I Isolation Switch input pin.
SWO 18 O Isolation Switch output pin.
NC 19 — Not connected.
VGL 20 I Negative Charge Pump (V(GL)) voltage sense pin.
DRVN 21 O Negative Charge Pump (V(GL)) base drive pin.
DRVP 22 I Positive charge pump (V(GH)) base drive pin.
VGH 23 I Positive charge pump (V(GH)) output voltage sense and Gate Pulse Modulation supply pin.
VGHM 24 I / O Gate Pulse Modulation output pin.
RE 25 O Slope adjustment of Gate Pulse Modulation.
INBK3 26 — Buck 3 converter (V(HAVDD)) supply pin. This pin is internally connected to INBK1. Place a buffer capacitor close to this pin.
NC 27 — Not connected.
SWBK3 28 O Buck 3 Converter (V(HAVDD)) switch pin. Avoid long traces to the inductor because this trace carries switching waveforms that generate noise.
PGND3 29 — Buck 3 Converter (V(HAVDD)) Power Ground pin.
VHAVDD 30 I Buck 3 Converter (V(HAVDD)) voltage sense pin.
EN 31 I Enable of Isolation Switch, Boost converter and Buck 3 converter.
PGND2 32 — Buck 2 converter (V(CORE)) Power Ground pin.
SWBK2 33 O Buck 2 converter (V(CORE)) switch pin. Avoid long traces to the inductor because this trace carries switching waveforms that generate noise.
VCORE 34 I Buck 2 converter (V(CORE)) output voltage sense pin.
CTRL 35 I Gate Pulse Modulation control pin.
INBK2 36 — Buck 2 converter (V(CORE)) supply pin. Place a buffer capacitor close to this pin.
VIO 37 I Buck 1 converter (V(IO)) output voltage sense pin.
SWBK1 38, 39 O Buck 1 converter (V(IO)) switch pin. Avoid long traces to the diode and inductor because this trace carries switching waveforms that generate noise.
NC 40 — Not connected.
Exposed thermal pad — The Exposed thermal pad is connected to AGND.