SLVS932F May   2009  – November 2014 TPS54325

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Simplified Schematic
  5. Revision History
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 Handling Ratings
    3. 7.3 Thermal Information
    4. 7.4 Recommended Operating Conditions
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Soft Start and Pre-Biased Soft Start
      2. 8.3.2 Power Good
      3. 8.3.3 Output Discharge Control
      4. 8.3.4 Current Protection
      5. 8.3.5 Overvoltage and Undervoltage Protection
      6. 8.3.6 UVLO Protection
      7. 8.3.7 Thermal Shutdown
    4. 8.4 Device Functional Modes
      1. 8.4.1 PWM Operation
      2. 8.4.2 PWM Frequency and Adaptive On-Time Control
      3. 8.4.3 Operation with VIN < 4.5 V
      4. 8.4.4 Operation With EN Control
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Output Voltage Resistors Selection
        2. 9.2.2.2 Output Filter Selection
        3. 9.2.2.3 Input Capacitor Selection
        4. 9.2.2.4 Bootstrap Capacitor Selection
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
    3. 11.3 Thermal Considerations
  12. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 Third-Party Products Disclaimer
      2. 12.1.2 Development Support
    2. 12.2 Documentation Support
      1. 12.2.1 Related Documentation
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7 Specifications

7.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
VI Input voltage range VIN, VCC, EN –0.3 20 V
VBST –0.3 26 V
VBST (vs SW1, SW2) –0.3 6.5 V
VFB, VO, SS, PG –0.3 6.5 V
SW1, SW2 –2 20 V
SW1, SW2 (10 ns transient) –3 20 V
VO Output voltage range VREG5 –0.3 6.5 V
PGND1, PGND2 –0.3 0.3 V
Vdiff Voltage from GND to POWERPAD –0.2 0.2 V
TJ Operating junction temperature –40 150 °C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

7.2 Handling Ratings

MIN MAX UNIT
Tstg Storage temperature range –55 150 °C
V(ESD) Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1) 2000 V
Charged device model (CDM), per JEDEC specification JESD22-C101, all pins(2) 500
(1) JEDEC document JEP155 states that 2000-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 500-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Thermal Information

THERMAL METRIC(1) PWP UNIT
12 PINS
RθJA Junction-to-ambient thermal resistance 55.6 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 51.3
RθJB Junction-to-board thermal resistance 26.4
ψJT Junction-to-top characterization parameter 1.8
ψJB Junction-to-board characterization parameter 20.6
RθJC(bot) Junction-to-case (bottom) thermal resistance 4.3
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

7.4 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
VCC Supply input voltage range 4.5 18 V
VIN Power input voltage range 2 18 V
VI Input voltage range VBST –0.1 24 V
VBST (vs SW1, SW2) –0.1 6
SS, PG –0.1 6
EN –0.1 18
VO, VFB –0.1 5.5
SW1, SW2 –1.8 18
SW1, SW2 (10 ns transient) –3 18
PGND1, PGND2 –0.1 0.1
VO Output voltage range VREG5 –0.1 6 V
IO Output current range IVREG5 0 10 mA
TA Operating free-air temperature –40 85 °C
TJ Operating junction temperature –40 125 °C

7.5 Electrical Characteristics

over operating free-air temperature range, VCC, VIN = 12 V (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SUPPLY CURRENT
IVCC Operating - non-switching supply current VCC current, TA = 25°C, EN = 5 V,
VFB = 0.8 V
850 1300 μA
IVCCSDN Shutdown supply current VCC current, TA = 25°C, EN = 0 V 10 μA
LOGIC THRESHOLD
VENH EN high-level input voltage EN 1.6 V
VENL EN low-level input voltage EN 0.4 V
VFB VOLTAGE AND DISCHARGE RESISTANCE
VFBTH VFB threshold voltage TA = 25°C, VO = 1.05 V 757 765 773 mV
TA = 0°C to 85°C, VO = 1.05 V(1) 753 777
TA = -40°C to 85°C, VO = 1.05 V(1) 751 779
IVFB VFB input current VFB = 0.8 V, TA = 25°C 0 ±0.1 μA
RDischg VO discharge resistance EN = 0 V, VO = 0.5 V, TA = 25°C 50 100 Ω
VREG5 OUTPUT
VVREG5 VREG5 output voltage TA = 25°C, 6.0 V < VCC < 18 V,
0 < IVREG5 < 5 mA
5.3 5.5 5.7 V
VLN5 Line regulation 6.0 V < VCC < 18 V, IVREG5 = 5 mA 20 mV
VLD5 Load regulation 0 mA < IVREG5 < 5 mA 100 mV
IVREG5 Output current VCC = 6 V, VREG5 = 4.0 V, TA = 25°C 70 mA
MOSFET
Rdsonh High side switch resistance 25°C, VBST - SW1, SW2 = 5.5 V 120
Rdsonl Low side switch resistance 25°C 70
CURRENT LIMIT
Iocl Current limit TA = –40°C to 85°C (1) 3.5 4.1 5.5 A
THERMAL SHUTDOWN
TSDN Thermal shutdown threshold Shutdown temperature (1) 150 °C
Hysteresis (1) 25
ON-TIME TIMER CONTROL
tON On time VIN = 12 V, VO = 1.05 V 145 ns
tOFF(MIN) Minimum off time TA = 25°C, VFB = 0.7 V 260 ns
SOFT START
ISSC SS charge current VSS = 0 V 1.4 2.0 2.6 μA
ISSD SS discharge current VSS = 0.5 V 0.1 0.2 mA
POWER GOOD
VTHPG PG threshold VFB rising (good) 85% 90% 95%
VFB falling (fault) 85%
IPG PG sink current PG = 0.5 V 2.5 5 mA
OUTPUT UNDERVOLTAGE AND OVERVOLTAGE PROTECTION
VOVP Output OVP trip threshold OVP detect 115% 120% 125%
TOVPDEL Output OVP prop delay 5 μs
VUVP Output UVP trip threshold UVP detect 65% 70% 75%
Hysteresis 10%
TUVPDEL Output UVP delay 0.25 ms
TUVPEN Output UVP enable delay Relative to soft-start time x 1.7
UVLO
VUVLO UVLO threshold Wake up VREG5 voltage 3.45 3.70 3.95 V
Hysteresis VREG5 voltage 0.15 0.25 0.35
(1) Not production tested.

7.6 Typical Characteristics

VIN = 12 V, TA = 25°C (unless otherwise noted)
vccis_tj_lvs932.gif
Figure 1. VCC Temperature vs Junction Temperature
fsw_io5_lvs932.gif
Figure 3. Switching Frequency vs Output Current
vccsdn_tj_lvs932.gif
Figure 2. VCC Shutdown Current vs Junction Temperature