ZHCSNA9F April 1977 – January 2021 SG2524 , SG3524
PRODUCTION DATA
- 1 特性
- 2 应用
- 3 说明
- 4 Revision History
- 5 Pin Configurations and Functions
- 6 Specifications
- 7 12
- 8 Parameter Measurement Information
- 9 Detailed Description
- 10Layout
- 11Device and Documentation Support
封装选项
请参考 PDF 数据表获取器件具体的封装图。
机械数据 (封装 | 引脚)
- NS|16
- N|16
- D|16
散热焊盘机械数据 (封装 | 引脚)
- D|16
订购信息
7.1 Electrical Characteristics
over operating free-air temperature range, VCC = 20 V, f = 20 kHz (unless otherwise noted)
| PARAMETER | TEST CONDITIONS(2) | SG2524 | SG3524 | UNIT | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIN | TYP(2) | MAX | MIN | TYP(1) | MAX | |||||||
| Reference section | ||||||||||||
| Output voltage | 4.8 | 5 | 5.2 | 4.6 | 5 | 5.4 | V | |||||
| Input Regulation | VCC = 8 V to 40 V | 10 | 20 | 10 | 30 | mV | ||||||
| Ripple rejection | f = 120 Hz | 66 | 66 | dB | ||||||||
| Output regulation | IO = 0 mA to 20 mA | 20 | 50 | 20 | 50 | mV | ||||||
| Output voltage change with temperature | TA = MIN to MAX | 0.3% | 1% | 0.3% | 1% | |||||||
| Short-circuit output current(3) | Vref = 0 | 100 | 100 | mA | ||||||||
| Error Amplifier section | ||||||||||||
| VIO | Input offset voltage | VIC = 2.5 V | 0.5 | 5 | 2 | 10 | mV | |||||
| IIB | Input bias current | VIC = 2.5 V | 2 | 10 | 2 | 10 | µA | |||||
| Open-loop voltage amplification | 72 | 80 | 60 | 80 | dB | |||||||
| VICR | Common-monde input voltage range | TA = 25°C | 1.8 to 3.4 | 1.8 to 3.4 | V | |||||||
| CMMR | Common-mode rejection ratio | 70 | 70 | dB | ||||||||
| B1 | Unity-gain bandwidth | 3 | 3 | MHz | ||||||||
| Output swing | TA = 25°C | 0.5 | 3.8 | 0.5 | 3.8 | V | ||||||
(1) All typical values, except for temperature coefficients, are at TA = 25°C.
(2) For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
(3) Standard deviation is a measure of the statistical distribution about the mean, as derived from the formula:
