首頁
設計與開發

ECON-3P-NEDUCAM

e-con Systems NeduCAM camera modules based on FPD-Link III serializers

立即訂購

ECON-3P-NEDUCAM

從： e-con Systems Inc.
立即訂購

概覽

NeduCAM is a product family of camera modules based combining various image sensors with an FPD-Link III serializer for supporting multiple remotely located cameras through serial connections to a host processor. 

NeduCAMxx products are the camera module only, which is a fully-assembled 2-board stack-up consisting of a sensor board and a serializer board.

NeduCAMxx-CUTDA4 are starter kits developed to support the non-standard 40-pin CSI connector on the SK-TDA4 evaluation module for TDA4VM, which include a 4-channel deserializer adapter board, a 15-m coaxial cable assembly with FAKRA connectors on both ends, and a single NeduCAMxx camera module to begin evaluating the end-to-end system from image sensor to applications processor.  

In addition to SK-TDA4VM, the NeduCAMxx-CUTDA4 evaluation kits are also compatible with SK-AM68, SK-AM69, and other starter kit EVMs using the same 40-pin connector for high bandwidth vision processing.

特點
  • 30 mm x 30 mm PCB size (camera module stack-up), 65 mm x 67 mm (deserializer)
  • Industry-standard FAKRA connectors, 15-m cable assembly provided in CUTDA4 kit
  • FPD-Link serial data and power over a single coaxial cable
  • Bare PCBs, fully assembled, M12 mount with appropriate lens installed
  • Power supplied through coaxial cable plugged into FAKRA connector
  • Various camera sensors for different applications
  • V4L2 Linux driver, gstreamer supported by e-con Systems
FPD-Link SerDes
DS90UB953-Q1 — 適用於 200 萬像素/60fps 攝影機與雷達的 200 萬像素 MIPI® CSI-2 FPD-Link III 串聯器 DS90UB960-Q1 — 具雙 CSI-2 輸出埠的四 2 MP 攝影機集線器 FPD-Link III 解串器

 

V3Link SerDes
TDES960 — 適用高速感測器的 4.16-Gbps MIPI® CSI-2 V³Link 解串列四集線器 TSER953 — 適用高速感測器的 4.16-Gbps MIPI® CSI-2 V³Link 串聯器
下載 觀看有字幕稿的影片 影片

訂購並開始開發

光學模組

NEDUCAM25 — AR0234 2.3-MP global shutter camera module with serializer, FAKRA connector

支援產品和硬體

NEDUCAM25 — AR0234 2.3-MP global shutter camera module with serializer, FAKRA connector

close
版本: null
發行日期:
open-in-new

檢視所有版本

開發套件

NEDUCAM25-CUTDA4 — NeduCAM25 evaluation kit with 4-channel deserializer board for SK-TDA4VM

支援產品和硬體

NEDUCAM25-CUTDA4 — NeduCAM25 evaluation kit with 4-channel deserializer board for SK-TDA4VM

close
版本: null
發行日期:
open-in-new

檢視所有版本

開發套件

NEDUCAM81-CUTDA4 — NeduCAM81 evaluation kit with 4-channel deserializer board for SK-TDA4VM

支援產品和硬體

NEDUCAM81-CUTDA4 — NeduCAM81 evaluation kit with 4-channel deserializer board for SK-TDA4VM

close
版本: null
發行日期:
open-in-new

檢視所有版本

適用 TI 的評估品項標準條款與條件。

相關設計資源

硬體開發

開發板
SK-AM68 — 適用於視覺 AI 與通用處理器的 AM68 和 AM68A 入門套件 SK-AM69 — 適用於視覺 AI 與通用處理器的 AM69 和 AM69A 入門套件 SK-TDA4VM — 適用邊緣 AI 視覺系統的 TDA4VM 處理器入門套件

支援與培訓

第三方支援
TI 並未針對此硬體提供持續直接設計支援。如需在進行設計時獲得支援，請聯絡 e-con Systems Inc.。
免責聲明

以上特定資訊和資源 (包括非 TI 網站的連結) 可能由第三方合作夥伴提供，且將其納入此處僅供方便使用。TI 不是該等資訊和資源之內容的提供者，亦不為該等資訊和資源之內容負責，且您應代表您自己針對您的預期使用，對其進行審慎評估。在此處納入該等資訊和資源並不暗示 TI 對任何第三方公司的背書，且不應解讀為對任何第三方產品或服務之適用性的保證或聲明，無論是獨立或結合任何 TI 產品或服務皆然。