首頁 電源管理 DC/DC switching regulators DC/DC converters
首頁
電源管理
DC/DC switching regulators
DC/DC converters

TPS63807

現行

2A、11-uA 靜態電流降壓-升壓轉換器

立即訂購
產品規格表

TPS63807

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Buck-Boost Vin (max) (V) 5.5 Vin (min) (V) 1.3 Vout (max) (V) 5.2 Vout (min) (V) 1.8 Switch current limit (typ) (A) 5 Features Enable, Light-load efficiency, Load Disconnect, Output discharge, Power good, Prebias startup, Synchronous rectification, UVLO fixed Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000011 Duty cycle (max) (%) 100
Rating Catalog Topology Buck-Boost Vin (max) (V) 5.5 Vin (min) (V) 1.3 Vout (max) (V) 5.2 Vout (min) (V) 1.8 Switch current limit (typ) (A) 5 Features Enable, Light-load efficiency, Load Disconnect, Output discharge, Power good, Prebias startup, Synchronous rectification, UVLO fixed Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000011 Duty cycle (max) (%) 100
DSBGA (YFF) 15 3.08000000000000022 mm² 1.4000000000000001 x 2.2
  • Three pin-to-pin device options: TPS63805, TPS63806, and TPS63807 with specific application focus
  • Input voltage range: 1.3 V to 5.5 V
    • Device input voltage > 1.8 V for start-up
  • Output voltage range: 1.8 V to 5.2 V (adjustable)
  • High efficiency over the entire load range
    • Power save mode and mode selection for forced PWM-mode
  • Peak current buck-boost mode architecture
    • Defined transition points between buck, buck-boost, and boost operation modes
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
  • Safety and robust operation features
    • Integrated soft start
    • Overtemperature- and overvoltage-protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • TPS63805
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
  • TPS63806
    • Optimized for best load step response (180-mV load-step response at a 2 A current step)
    • Up to 2.5-A transient output current
    • 13-µA operating quiescent current
  • TPS63807
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
    • Output discharge feature when EN is low
    • 480-µs Tramp for small inrush current during start-up
  • Three pin-to-pin device options: TPS63805, TPS63806, and TPS63807 with specific application focus
  • Input voltage range: 1.3 V to 5.5 V
    • Device input voltage > 1.8 V for start-up
  • Output voltage range: 1.8 V to 5.2 V (adjustable)
  • High efficiency over the entire load range
    • Power save mode and mode selection for forced PWM-mode
  • Peak current buck-boost mode architecture
    • Defined transition points between buck, buck-boost, and boost operation modes
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
  • Safety and robust operation features
    • Integrated soft start
    • Overtemperature- and overvoltage-protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • TPS63805
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
  • TPS63806
    • Optimized for best load step response (180-mV load-step response at a 2 A current step)
    • Up to 2.5-A transient output current
    • 13-µA operating quiescent current
  • TPS63807
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
    • Output discharge feature when EN is low
    • 480-µs Tramp for small inrush current during start-up

The TPS63805, TPS63806, and TPS63807 are high efficiency, high output current buck-boost converters. Depending on the input voltage, they automatically operate in boost, buck, or in a novel 4-cycle buck-boost mode when the input voltage is approximately equal to the output voltage.

The TPS63805, TPS63806, and TPS63807 are high efficiency, high output current buck-boost converters. Depending on the input voltage, they automatically operate in boost, buck, or in a novel 4-cycle buck-boost mode when the input voltage is approximately equal to the output voltage.

filter 尋找其它 DC/DC converters
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TPS63806 現行 採用小巧 WCSP 具有最佳化的負載步進回應的 2.5A 高效降壓升壓轉換器 Lower Iq
TPS63810 現行 適用於動態電壓負載，具有 I²C 介面的 2.5-A 高效降壓-升壓轉換器 Without I2C
功能相同，但引腳輸出與所比較的裝置不同
TPS631010 現行 3-A 尖峰電流高效率超小型解決方案尺寸降壓升壓轉換器 Upgraded product with 8-µA IQ and smaller WCSP package
TPS63901 現行 採用 WCSP 封裝、具 75-nA 運作 IQ 的 5.5-V 降壓升壓轉換器 Ultra low IQ and smaller size
功能與所比較的裝置相似
TPS631000 現行 1.5-A 輸出電流、高功率密度降壓升壓轉換器 Upgraded product with 8-uA IQ and smaller SOT package.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 日期
* Data sheet TPS6380x High-Efficiency, Low IQ Buck-Boost Converter with Small Solution Size datasheet (Rev. E) PDF | HTML 2021年 8月 26日
Application note Different Methods to Drive LEDs Using TPS63XXX Buck-Boost Converters (Rev. D) 2021年 8月 4日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS63805EVM-026 — 高電流、高效率降壓-升壓轉換器評估模組

TPS63805EVM-026 的設計旨在幫助使用者輕鬆評估及測試 TPS63805 降壓升壓轉換器的運作及功能。EVM 的輸入電壓運作範圍為 1.3-V 至 5.5-V。在降壓模式及升壓模式中，輸出電流可高達 2A。使用者可輕鬆評估 TPS63805 的不同功能，如精密裝置啟用。TPS63805 採用小型 2.3 x 1.4 mm² WCSP 封裝。
使用指南: PDF
TI.com 無法提供
支援軟體

TIDCFU0 — TIDA-050017 TEC Driver Software Example

支援產品和硬體

支援產品和硬體
下載
模擬型號

TPS63805 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMCQ6B.ZIP (50 KB) - PSpice Model
下載
計算工具

SLVC808 — Battery Lifetime Estimator

支援產品和硬體

支援產品和硬體
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YFF) 15 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片