計算工具
TPS63806
- Three pin-to-pin device options: TPS63805, TPS63806, and TPS63807 with specific application focus
- Input voltage range: 1.3 V to 5.5 V
- Device input voltage > 1.8 V for start-up
- Output voltage range: 1.8 V to 5.2 V (adjustable)
- High efficiency over the entire load range
- Power save mode and mode selection for forced PWM-mode
- Peak current buck-boost mode architecture
- Defined transition points between buck, buck-boost, and boost operation modes
- Forward and reverse current operation
- Start-up into pre-biased outputs
- Safety and robust operation features
- Integrated soft start
- Overtemperature- and overvoltage-protection
- True shutdown function with load disconnect
- Forward and backward current limit
- TPS63805
- Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
- 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
- 11-µA operating quiescent current
- TPS63806
- Optimized for best load step response (180-mV load-step response at a 2 A current step)
- Up to 2.5-A transient output current
- 13-µA operating quiescent current
- TPS63807
- Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
- 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
- 11-µA operating quiescent current
- Output discharge feature when EN is low
- 480-µs Tramp for small inrush current during start-up
The TPS63805, TPS63806, and TPS63807 are high efficiency, high output current buck-boost converters. Depending on the input voltage, they automatically operate in boost, buck, or in a novel 4-cycle buck-boost mode when the input voltage is approximately equal to the output voltage.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 17 設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS63806EVM — TPS63806 高電流、高效率降壓-升壓轉換器評估模組
TPS63806EVM 的設計旨在幫助使用者輕鬆評估及測試 TPS63806 降壓升壓轉換器的運作及功能。EVM 的輸入電壓運作範圍為 1.3V 至 5.5V。在降壓模式及升壓模式中,輸出電流可高達 2A。使用者可輕鬆評估 TPS63806 的各種功能,包括精密裝置啟用。TPS63806 為小型 2.3 x 1.4 mm² WCSP 封裝。
使用指南: PDF
參考設計
TIDA-010254 — 具有 Sub-1-GHz 和 Bluetooth® 5.2 的電池供電 mmWave 雷達感測器參考設計
此工業參考設計展示了將電池供電 IWRL6432 60GHz mmWave 雷達搭配 Sub-1 GHz 或 Bluetooth® 5.2 無線通訊使用的情況。此設計透過鋰電池,以人數計算和追蹤以及動作追蹤應用進行展示,前述應用會透過 Sub-1G 或 Bluetooth 將結果傳送至遠端主機,同時也相容於任何現有 IWRL6432 軟體。此參考設計將 LAUNCHXLCC1352R1 無線微控制器 LaunchPad™ 與 PC GUI 搭配使用,以視覺方式顯示雷達感測數據及偵測結果。
Design guide: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YFF) | 15 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。