首頁 電源管理 DC/DC 切換穩壓器 DC/DC 控制器

TPS40007

現行

源極/汲極、預偏壓運作的 2.25V-5.5V、300 kHz、同步降壓控制器

產品詳細資料

Rating Catalog Iout (max) (A) 15 Vin (max) (V) 5.5 Vin (min) (V) 2.25 Vout (max) (V) 4 Vout (min) (V) 0.7 Control mode Voltage mode Features Enable pin, Synchronous Rectification Duty cycle (max) (%) 94 Iq (typ) (A) 0.0015 Number of phases 1 Operating temperature range (°C) -40 to 85
Rating Catalog Iout (max) (A) 15 Vin (max) (V) 5.5 Vin (min) (V) 2.25 Vout (max) (V) 4 Vout (min) (V) 0.7 Control mode Voltage mode Features Enable pin, Synchronous Rectification Duty cycle (max) (%) 94 Iq (typ) (A) 0.0015 Number of phases 1 Operating temperature range (°C) -40 to 85
HVSSOP (DGQ) 10 14.7 mm² (3 mm × 4.9 mm)
  • Operating Input Voltage 2.25 V to 5.5 V
  • Output Voltage as Low as 0.7 V
  • 1% Internal 0.7 V Reference
  • Predictive Gate Drive™ N-Channel MOSFET Drivers for Higher Efficiency
  • Externally Adjustable Soft-Start and Overcurrent Limit
  • Fixed-Frequency Voltage-Mode Control
    • TPS40007, 300 kHz
    • TPS40009, 600 kHz
  • Source/Sink with VOUT Prebias
  • 10-Lead MSOP PowerPad™ Package for Higher Performance
  • Thermal Shutdown
  • Internal Boostrap Diode
  • APPLICATIONS
    • Networking Equipment
    • Telecom Equipment
    • Base Stations
    • Servers
    • DSP Power
    • Power Modules

PowerPAD and Predictive Gate Drive are trademarks of Texas Instruments Incorporated.

  • Operating Input Voltage 2.25 V to 5.5 V
  • Output Voltage as Low as 0.7 V
  • 1% Internal 0.7 V Reference
  • Predictive Gate Drive™ N-Channel MOSFET Drivers for Higher Efficiency
  • Externally Adjustable Soft-Start and Overcurrent Limit
  • Fixed-Frequency Voltage-Mode Control
    • TPS40007, 300 kHz
    • TPS40009, 600 kHz
  • Source/Sink with VOUT Prebias
  • 10-Lead MSOP PowerPad™ Package for Higher Performance
  • Thermal Shutdown
  • Internal Boostrap Diode
  • APPLICATIONS
    • Networking Equipment
    • Telecom Equipment
    • Base Stations
    • Servers
    • DSP Power
    • Power Modules

PowerPAD and Predictive Gate Drive are trademarks of Texas Instruments Incorporated.

The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drive™ technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.

The current-limit threshold is adjustable with a single resistor connected to the device. The TPS4000x controllers implement a closed-loop soft start function. Startup ramp time is set by a single external capacitor connected to the SS/SD pin. The SS/SD pin is also used for shutdown.

The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drive™ technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.

The current-limit threshold is adjustable with a single resistor connected to the device. The TPS4000x controllers implement a closed-loop soft start function. Startup ramp time is set by a single external capacitor connected to the SS/SD pin. The SS/SD pin is also used for shutdown.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LOW INPUT BUCK CONTROLLER, TPS40007/9 datasheet (Rev. B) 2005/2/8
選擇指南 Power Management Guide 2018 (Rev. R) 2018/6/25
選擇指南 DC/DC Buck Controller Solutions Selection Guide 2018/2/6
應用說明 Demystifying Type II and Type III Compensators Using Op-Amp and OTA for DC/DC Co 2014/7/11

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS40007EVM-001 — TPS40007EVM-001 評估模組

The TPS40007 is a voltage-mode, synchronous buck PWM controller that uses TI's proprietary Predictive Gate Drive™ technology to wring maximum efficiency from step-down converters. This controller provides a bootstrap circuit to allow the use of an N-channel MOSFET as the topside buck switch (...)
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS40007 TINA-TI Average Reference Design (Rev. A)

SLVM034 (63 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

TPS40007 TINA-TI Average Spice Model (Rev. A)

SLVM035 (4 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

TPS40007 TINA-TI Start-up Reference Design

SLIM019.TSC (59 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

TPS40007 TINA-TI Steady State Reference Design

SLIM020.TSC (59 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

TPS40007 TINA-TI Transient Spice Model

SLIM021.ZIP (27 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

TPS40007 Unencrypted PSpice Model Package (Rev. B)

SLVC168B.ZIP (329 KB) - PSpice 模型
支援產品和硬體
計算工具

SLUC263 — Type III Compensation Calculation Tool

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HVSSOP (DGQ) 10 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片