首頁 放大器 全差分放大器
首頁
放大器
全差分放大器

THS4521-HT

現行

高溫、極低功耗、負軌輸入、軌至軌輸出、差動放大器

立即訂購
產品規格表

THS4521-HT

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 3.6 BW at Acl (MHz) 104 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 377.5 Architecture Bipolar, Fully Differential ADC Driver Vn at flatband (typ) (nV√Hz) 4.6 Iq per channel (typ) (mA) 1.1 Rail-to-rail In to V-, Out Vos (offset voltage at 25°C) (max) (mV) 5 Operating temperature range (°C) -55 to 210 Iout (typ) (mA) 35 2nd harmonic (dBc) 96 3rd harmonic (dBc) 91.5 Frequency of harmonic distortion measurement (MHz) 0.001 GBW (typ) (MHz) 81 Input bias current (max) (pA) 3300000 Features Shutdown CMRR (typ) (dB) 105 Rating High Temp
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 3.6 BW at Acl (MHz) 104 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 377.5 Architecture Bipolar, Fully Differential ADC Driver Vn at flatband (typ) (nV√Hz) 4.6 Iq per channel (typ) (mA) 1.1 Rail-to-rail In to V-, Out Vos (offset voltage at 25°C) (max) (mV) 5 Operating temperature range (°C) -55 to 210 Iout (typ) (mA) 35 2nd harmonic (dBc) 96 3rd harmonic (dBc) 91.5 Frequency of harmonic distortion measurement (MHz) 0.001 GBW (typ) (MHz) 81 Input bias current (max) (pA) 3300000 Features Shutdown CMRR (typ) (dB) 105 Rating High Temp
CFP (HKJ) 8 38.985 mm² (— mm × — mm) SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm) DIESALE (KGD) — See data sheet CFP (HKQ) 8 38.985 mm² (— mm × — mm)
  • Fully Differential Architecture
  • Bandwidth: 40.7 MHz (210°C)
  • Slew Rate: 353.5 V/µs (210°C)
  • HD2: –96 dBc at 1 kHz
    (1 VRMS, RL = 1 kΩ) (210°C)
  • HD3: –91.5 dBc at 1 kHz
    (1 VRMS, RL = 1 kΩ) (210°C)
  • Input Voltage Noise: 19.95 nV/√Hz (f = 100 kHz)
  • Open-Loop Gain: 90 dB (typ) (210°C)
  • NRI—Negative Rail Input
  • RRO—Rail-to-Rail Output
  • Output Common-Mode Control (with Low Offset and Drift)
  • Power Supply:
    • Voltage: 2.5 V (±1.25 V) to 3.3 V (±1.65 V)
    • Current: 1.4 mA/ch (3.3 V)
  • Power-Down Capability: 10 µA (typ) (210°C)
  • Fully Differential Architecture
  • Bandwidth: 40.7 MHz (210°C)
  • Slew Rate: 353.5 V/µs (210°C)
  • HD2: –96 dBc at 1 kHz
    (1 VRMS, RL = 1 kΩ) (210°C)
  • HD3: –91.5 dBc at 1 kHz
    (1 VRMS, RL = 1 kΩ) (210°C)
  • Input Voltage Noise: 19.95 nV/√Hz (f = 100 kHz)
  • Open-Loop Gain: 90 dB (typ) (210°C)
  • NRI—Negative Rail Input
  • RRO—Rail-to-Rail Output
  • Output Common-Mode Control (with Low Offset and Drift)
  • Power Supply:
    • Voltage: 2.5 V (±1.25 V) to 3.3 V (±1.65 V)
    • Current: 1.4 mA/ch (3.3 V)
  • Power-Down Capability: 10 µA (typ) (210°C)

The THS4521 is a very low-power, fully differential op amp with rail-to-rail output and an input common-mode range that includes the negative rail. This amplifier is designed for low-power data acquisition systems and high-density applications where power dissipation is a critical parameter, and provides exceptional performance in audio applications.

The THS4521 features accurate output common-mode control that allows for dc-coupling when driving analog-to-digital converters (ADCs). This control, coupled with an input common-mode range below the negative rail as well as rail-to-rail output, allows for easy interfacing between single-ended, ground-referenced signal sources. Additionally, this device is ideally suited for driving both successive-approximation register (SAR) and delta-sigma (ΔΣ) ADCs using only a single 2.5-V to 3.3-V and ground power supply.

The THS4521 is characterized for operation from –55°C to 210°C.

The THS4521 is a very low-power, fully differential op amp with rail-to-rail output and an input common-mode range that includes the negative rail. This amplifier is designed for low-power data acquisition systems and high-density applications where power dissipation is a critical parameter, and provides exceptional performance in audio applications.

The THS4521 features accurate output common-mode control that allows for dc-coupling when driving analog-to-digital converters (ADCs). This control, coupled with an input common-mode range below the negative rail as well as rail-to-rail output, allows for easy interfacing between single-ended, ground-referenced signal sources. Additionally, this device is ideally suited for driving both successive-approximation register (SAR) and delta-sigma (ΔΣ) ADCs using only a single 2.5-V to 3.3-V and ground power supply.

The THS4521 is characterized for operation from –55°C to 210°C.
filter 尋找其它 全差分放大器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 Very-Low Power, Negative Rail Input, Rail-to-Rail Output, Differential Amp datasheet (Rev. D) 2012/5/30
* 輻射及可靠性報告 THS4521HKJ_HKQ Reliability Report 2012/9/20
* 輻射及可靠性報告 THS4521HD Reliability Report (Rev. A) 2012/8/17
電子書 The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 2017/3/28

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

THS4521EVM — THS4521 評估模組

The THS4521EVM is an evaluation module for the single, THS4521 in the D (8-lead SOIC) package.

The THS4521EVM is designed to quickly and easily demonstrate the functionality and versatility of the amplifier. The EVM is ready to connect to power, signal source, and test instruments through the use of (...)

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發模組 (EVM) 的 GUI

SLAC498 — HEATEVM GUI Software

支援產品和硬體
參考設計

TIDA-00002 — 適用於高溫應用的嚴苛環境採集終端 (HEAT) EVM 平台

HEATEVM 是一款 MCM，旨在提供一個可用於訊號調整與處理器評估的高溫平台。此模組由一組完整的零組件組成，設計可承受高達 200 °C 的極端操作溫度。電路板採用聚酰亞胺材料製成，同樣適用於此類高溫環境。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
CFP (HKJ) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian
DIESALE (KGD) — Ultra Librarian
CFP (HKQ) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片