CC2340R5MODA
Certified wireless module
- Optimized 48MHz Arm Cortex-M0+ processor
- 512KB of in-system programmable flash
- 12KB of ROM for bootloader and drivers
- 64KB of ultra-low leakage SRAM. Full RAM retention in standby mode
- 2.4GHz RF transceiver compatible with Bluetooth Low Energy
- Built on the CC2340R53 WCSP package
- Integrated antenna
- Optional external antenna
- Supports over-the-air upgrade (OTA)
- Serial wire debug (SWD)
Low power consumption
- MCU consumption:
- 2.6mA active mode, CoreMark
- 53µA/MHz running CoreMark
- 710nA standby mode
- 165nA shutdown mode, wake-up on pin
- Radio consumption:
- 5.5mA RX
- 5.1mA TX at 0dBm
- < 11.0mA TX at +8dBm
Wireless protocol support
- Bluetooth® LE(1)
- Features: LE 2M, LE Coded, Periodic Advertising, Extended Advertising, LE Secure Connections
- Qualified against Bluetooth Core 5.4
High-performance radio
- -102dBm sensitivity for Bluetooth® Low Energy 125kbps
- -96.5dBm sensitivity for Bluetooth® Low Energy 1Mbps
- Output power up to +8dBm with temperature compensation
Regulatory compliance
- Designed
for systems targeting compliance with these standards:
- EN 300 328 (Europe)
- FCC CFR47 Part 15
- ARIB STD-T66 (Japan)
- ISED (Canada)
- NCC (Taiwan)
- KCC (Korea)
- Up to 12 I/O pads
- 2 IO pads SWD, muxed with GPIOs
- 2 IO pads LFXT, muxed with GPIOs
- Up to 12 DIOs (analog or digital IOs)
- 3 × 16-bit and 1× 24-bit general-purpose timers, quadrature decode mode support
- 12-bit ADC, 267ksps with internal reference, 4 external ADC inputs
- 1× low power comparator
- 1× UART
- 1× SPI
- 1× I2C
- Real-time clock (RTC)
- Integrated temperature and battery monitor
- Watchdog timer
Security enablers
- AES 128-bit cryptographic accelerator
- Random number generator from on-chip analog noise
Development tools and software
- LP-EM-CC2340R53 LaunchPad Development Kit
- LP-EM-CC2340R5MODA Design Files
- SimpleLink™ Low Power F3 software development kit
- SmartRF™ Studio for simple radio configuration
- SysConfig system configuration tool
Operating range
- On-chip buck DC/DC converter
- 1.71V to 3.8V single supply voltage
- Tj: –40°C up to +85°C
RoHS-compliant package
- 7mm x 10mm 24 pin MHA Package
(1)Module is pre-certified for Bluetooth LE only
The CC2340R5MODA SimpleLink™ of devices are 2.4GHz wireless microcontrollers (MCUs), targeting Bluetooth® Low Energy. These devices are optimized for low-power wireless communication with Over the Air Download (OAD) support in Building automation (wireless sensors, lighting control, beacons), asset tracking, medical, and Personal electronics (toys) markets. Highlighted features of this device include:
- The CC2340R5MODA is a 7mm x 10mm certified wireless module 2.4GHz with integrated antenna, DCDC components and high-frequency crystal oscillator.
- Support for Bluetooth 5 features: high-speed mode (2Mbps PHY), long-range (LE Coded 125kbps and 500kbps PHYs), privacy 1.2.1 and channel selection algorithm #2, as well as backward compatibility and support for key features from the Bluetooth 4.2 and earlier Low Energy specifications.
- Fully qualified Bluetooth software protocol stack included with the SimpleLink™ Low Power F3 software development kit (SDK)
- Ultra-low standby current less than 0.71µA with RTC operational and full RAM retention that enables significant battery life extension, especially for applications with longer sleep intervals.
- Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth Low Energy (–102dBm for 125kbps LE Coded PHY)
The CC2340R5MODA family is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single-core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit the SimpleLink™ MCU platform.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | CC2340R5MODA SimpleLink™ 2.4GHz Wireless MCU Module with Integrated Antenna datasheet (Rev. A) | PDF | HTML | 2026/7/10 | ||
| * | 使用指南 | CC23xx SimpleLink Wireless MCU Technical Reference Manual (Rev. A) | PDF | HTML | 2024/8/7 | ||
| * | 勘誤表 | CC2340R5 SimpleLink Wireless MCU Device (Rev. F) | PDF | HTML | 2025/9/29 | ||
| 應用說明 | CC2340R5MODA Manual Information for the End User and OEM Installation Guide | PDF | HTML | 2026/7/6 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
LP-EM-CC2340R53 — 適用於 CC2340R SimpleLink™ 系列 2.4GHz 多標準無線 MCU 的 LaunchPad™ 開發套件
LP-XDS110 — XDS110 LaunchPad™ 開發套件偵錯器
The LP-XDS110 LaunchPad 開發套件偵錯器，是可對德州儀器 (TI) 微控制器、微處理器和 DSP XDS 相容產品進行編程和偵錯的工具。The LP-XDS110 設計為透過 20 針腳邊緣連接器直接連接到分離式 Launchpad，也可用於對其他使用 XDS110 OUT 連接器的 LaunchPad 和 XDS 相容裝置進行偵錯。
LP-XDS110ET — 具有 EnergyTrace™ 軟體的 XDS110ET LaunchPad™ 開發套件偵錯器
LP-XDS110ET LaunchPad 開發套件偵錯器可用於對德州儀器 (TI) 微控制器、微處理器和 DSP XDS 相容裝置進行編程和偵錯。LP-XDS110ET 設計為透過 20 針腳邊緣連接器直接連接到分離式 Launchpad 開發套件，也可用於對其他使用 XDS110 OUT 連接器的 LaunchPad 開發套件和 XDS 相容裝置進行偵錯。LP-XDS110ET 增加了功率量測電路、可支援 EnergyTrace™ 軟體。
TMDSEMU110-U — XDS110 JTAG 偵錯探測器
德州儀器 XDS110 是一種全新的偵錯探測器 (模擬器) 類別，適用於 TI 嵌入式處理器。XDS110 取代 XDS100 系列，可在單一 Pod 中支援更廣泛的標準 (IEEE1149.1、IEEE1149.7、SWD)。同時，所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。 對於針腳上的核心追蹤，則需要 XDS560v2 PRO TRACE。
德州儀器 XDS110 透過 TI 20 針腳連接器（具有用於 TI 14 針腳和 Arm 10 針腳和 Arm 20 針腳的多轉接器）連接到目標電路板，並透過 USB2.0 (...)
SIMPLELINK-LOWPOWER-F3-SDK — SimpleLink™ Low Power F3 software development kit (SDK) for the CC23xx and CC27xx devices
SimpleLink™ 低功率 SDK 支援 CC13xx、CC23xx、CC26xx 及 CC27xx 產品系列。這些 SDK 搭配可提供適合開發 Sub-1 GHz 與 2.4 GHz 應用的全方位軟體套件，包括在 SimpleLink CC13xx、CC23xx、CC26xx 和 CC27xx 無線 MCU 上支援 Bluetooth® 低功耗、網狀網路、Zigbee®、Matter、Thread、802.15.4 型、專有與多協定解決方案。
SIMPLELINK-LOWPOWER-ZEPHYR-SDK — Zephyr® Platform support for the SimpleLink™ Low Power family of devices
SimpleLink™ 低功率 SDK 支援 CC13xx、CC23xx、CC26xx 及 CC27xx 產品系列。這些 SDK 搭配可提供適合開發 Sub-1 GHz 與 2.4 GHz 應用的全方位軟體套件，包括在 SimpleLink CC13xx、CC23xx、CC26xx 和 CC27xx 無線 MCU 上支援 Bluetooth® 低功耗、網狀網路、Zigbee®、Matter、Thread、802.15.4 型、專有與多協定解決方案。
SIMPLELINK-TI-OPENTHREAD-SDK — SimpleLink™ family of devices OpenThread software
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
CCSTUDIO-OPENOCD — OpenOCD Binary Releases
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
SIMPLELINK-ACADEMY-CC23XX — Simplelink™ CC23xx Academy
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
SMARTRF-STUDIO-8 — 適用於 CC23xx 和 CC27xx 裝置以及 CC140xP 收發器的 SmartRF Studio 8 應用軟體
SmartRF™ Studio 是一款 Windows 應用程式，功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中，能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生，以及射頻系統的實際測試和除錯。
SmartRF Studio 支援下列 TI 裝置：
資源
SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices
SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。一個簡單的三步驟流程用於請求審查，以及相關技術文件和資源的連結，可在此處找到。
入門指南
一般設計問題應張貼在我們的 E2E 討論區中，然後才能要求 2.4 GHz 硬體設計審查。
請確實備妥下列必要文件，隨硬體設計審查申請表一起傳送：
- 確認產品頁上提供的所有硬體文件均已經過審查，例如產品規格表、設計指南、使用指南和其他硬體資源
- 電路圖的可攜式文件格式 (PDF) 版本可供檢閱
- 物料清單 (BOM) 可供檢閱
- 堆疊詳細資料可供檢閱
- 電路板設計的 Gerber 檔案 (含零件位置和參考指示項) (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| QFM (MHA) | 24 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。