SN74LVC3G07-Q1
- Qualified for Automotive Applications
- Supports 5-V VCC Operation
- Max tpd of 3.7 ns at 3.3 V
- Low Power Consumption, 10-µA Max ICC
- ±24-mA Output Drive at 3.3 V
- Input and Open-Drain Output Accepts Voltages up to 5.5 V
- Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
- Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C
- Ioff Supports Partial-Power-Down Mode Operation
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
This triple buffer/driver is designed for 1.65-V to 5.5-V VCC operation.
The output of the SN74LVC3G07 is open drain and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 32 mA.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | Triple Buffer/Driver With Open-Drain Outputs 数据表 (Rev. B) | 2008-4-10 | |||
| 功能安全信息 | SN74LVC3G07-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FM | PDF | HTML | 2021-9-29 | |||
| 更多文献资料 | 汽车逻辑器件 | 英语版 | 2014-2-5 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
5-8-LOGIC-EVM — 支持 5 至 8 引脚 DCK、DCT、DCU、DRL 和 DBV 封装的通用逻辑评估模块
TIDM-1003 — 适用于 PM 或 BLDC 电机的低电压、50A 无传感器 FOC 参考设计
此设计是一款 30V 至 54V 无刷直流电机 (BLDC) 或永磁同步电机 (PMSM) 控制器，适用于低电压、高电流、高功率电动自行车、电动工具、风扇和泵应用。此设计采用德州仪器 (TI) 的 UCC27211D MOSFET 驱动器、CSD19506KCS 80V NexFET™ 功率 MOSFET、利用 InstaSPIN™ 技术的 TMS320F28027F MCU、TPS54360 降压转换器和 LDO。此设计利用 InstaSPIN-FOC 技术来识别和调整 PMSM 或 BLDC 电机参数，并通过外部调速阀控制电机转速。总体而言，此设计重点演示了如何高效控制高功率、低电压 (...)
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| VSSOP (DCU) | 8 | Ultra Librarian |