SN74HCS596

正在供货

8 位串行输入/并行输出移位寄存器

立即订购

数据表

document-pdfAcrobat SN74HCS596SN74HCS596 8-Bit Shift Register With Schmitt-Trigger Inputs 数据表 (英语)

SN74HCS596

正在供货

立即订购

产品详情

Configuration

Serial-in, Parallel-out

Bits (#)

8

Technology family

HCS

Input type

Schmitt-Trigger

Output type

Open-drain

Clock frequency (MHz)

75

IOL (max) (mA)

7.8

IOH (max) (mA)

-7.8

Supply current (max) (µA)

2

Features

Balanced outputs, High speed (tpd 10-50ns), Output register, Positive input clamp diode

Operating temperature range (°C)

-40 to 125

Rating

Catalog

Configuration

Serial-in, Parallel-out

Bits (#)

8

Technology family

HCS

Input type

Schmitt-Trigger

Output type

Open-drain

Clock frequency (MHz)

75

IOL (max) (mA)

7.8

IOH (max) (mA)

-7.8

Supply current (max) (µA)

2

Features

Balanced outputs, High speed (tpd 10-50ns), Output register, Positive input clamp diode

Operating temperature range (°C)

-40 to 125

Rating

Catalog

TSSOP (PW)

16

32 mm² (5 mm × 6.4 mm)

SOIC (D)

16

59.4 mm² (9.9 mm × 6 mm)

Wide operating voltage range: 2 V to 6 V
Schmitt-trigger inputs allow for slow or noisy input signals
Low power consumption
- Typical I_CC of 100 nA
- Typical input leakage current of ±100 nA
±7.8-mA output drive at 6 V
Extended ambient temperature range: –40°C to +125°C, T_A

Wide operating voltage range: 2 V to 6 V
Schmitt-trigger inputs allow for slow or noisy input signals
Low power consumption
- Typical I_CC of 100 nA
- Typical input leakage current of ±100 nA
±7.8-mA output drive at 6 V
Extended ambient temperature range: –40°C to +125°C, T_A

The SN74HCS596 device contains an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. All inputs include Schmitt-triggers, eliminating any erroneous data outputs due to slow-edged or noisy input signals. The storage register has parallel open-drain outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and a serial output (Q_H’) for cascading. When the output-enable (OE) input is high, the outputs are in a highimpedance state. Internal register data is not impacted by the operation of the OE input.