SN74HCS264

正在供货

8 位并行输出串行移位寄存器

立即订购

数据表

document-pdfAcrobat SN74HCS264 8-Bit Parallel-Out Serial Shift Registers With Schmitt-Trigger Inputs 数据表 (英语)

SN74HCS264

正在供货

数据表

立即订购

产品详情

Configuration

Serial-in, Parallel-out

Bits (#)

8

Technology family

HCS

Input type

Schmitt-Trigger

Output type

Push-Pull

Clock frequency (MHz)

62

IOL (max) (mA)

7.8

IOH (max) (mA)

-7.8

Supply current (max) (µA)

2

Features

Balanced outputs, High speed (tpd 10-50ns), Positive input clamp diode

Operating temperature range (°C)

-40 to 125

Rating

Catalog

Configuration

Serial-in, Parallel-out

Bits (#)

8

Technology family

HCS

Input type

Schmitt-Trigger

Output type

Push-Pull

Clock frequency (MHz)

62

IOL (max) (mA)

7.8

IOH (max) (mA)

-7.8

Supply current (max) (µA)

2

Features

Balanced outputs, High speed (tpd 10-50ns), Positive input clamp diode

Operating temperature range (°C)

-40 to 125

Rating

Catalog

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

Wide operating voltage range: 2 V to 6 V
Schmitt-trigger inputs allow for slow or noisy input signals
Low power consumption
- Typical I_CC of 100 nA
- Typical input leakage current of ±100 nA
±7.8-mA output drive at 6 V
Extended ambient temperature range: –40°C to +125°C, T_A

Wide operating voltage range: 2 V to 6 V
Schmitt-trigger inputs allow for slow or noisy input signals
Low power consumption
- Typical I_CC of 100 nA
- Typical input leakage current of ±100 nA
±7.8-mA output drive at 6 V
Extended ambient temperature range: –40°C to +125°C, T_A

The SN74HCS264 device contains an 8-bit shift register with AND-gated serial inputs and an asynchronous clear (CLR) input. Data at the serial inputs can be changed while CLK is high or low, provided the minimum setup time requirements are met. All inputs include Schmitt-trigger architecture, adding noise margin and eliminating any input transition rate requirement. Clocking occurs on the low-to-high-level transition of CLK.

Upon a clock trigger, the device will store the result of the (A ● B) input data line in the first register and propagate each register’s data to the next register. The outputs are inverted from the data stored.

The SN74HCS264 device contains an 8-bit shift register with AND-gated serial inputs and an asynchronous clear (CLR) input. Data at the serial inputs can be changed while CLK is high or low, provided the minimum setup time requirements are met. All inputs include Schmitt-trigger architecture, adding noise margin and eliminating any input transition rate requirement. Clocking occurs on the low-to-high-level transition of CLK.

Upon a clock trigger, the device will store the result of the (A ● B) input data line in the first register and propagate each register’s data to the next register. The outputs are inverted from the data stored.

filter

查找其他移位寄存器

下载观看带字幕的视频视频