SN74CBTLV1G125

正在供货

3.3V、1:1 (SPST)、单通道 FET 总线开关

立即订购

数据表

document-pdfAcrobat SN74CBTLV1G125 数据表 (Rev. H) (英语)

SN74CBTLV1G125

正在供货

数据表

立即订购

产品详情

Protocols

Analog

Configuration

1:1 SPST

Number of channels

1

Bandwidth (MHz)

200

Ron (typ) (mΩ)

5000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

3.6

Operating temperature range (°C)

-40 to 85

Input/output continuous current (max) (mA)

128

COFF (typ) (pF)

7

OFF-state leakage current (max) (µA)

1

Ron (max) (mΩ)

25000

VIH (min) (V)

2

VIL (max) (V)

0.8

Rating

Catalog

Protocols

Analog

Configuration

1:1 SPST

Number of channels

1

Bandwidth (MHz)

200

Ron (typ) (mΩ)

5000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

3.6

Operating temperature range (°C)

-40 to 85

Input/output continuous current (max) (mA)

128

COFF (typ) (pF)

7

OFF-state leakage current (max) (µA)

1

Ron (max) (mΩ)

25000

VIH (min) (V)

2

VIL (max) (V)

0.8

Rating

Catalog

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

SOT-SC70 (DCK)

5

4.2 mm² (2 mm × 2.1 mm)

5– Switch Connection Between Two Ports
Rail–to–Rail Switching on Data I/O Ports
I_off Supports Partial–Power–Down Mode Operation

5– Switch Connection Between Two Ports
Rail–to–Rail Switching on Data I/O Ports
I_off Supports Partial–Power–Down Mode Operation

The SN74CBTLV1G125 features a single high–speed line switch. The switch is disabled when the output–enable (OE) input is high.

This device is fully specified for partial–power–down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high–impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current–sinking capability of the driver.

The SN74CBTLV1G125 features a single high–speed line switch. The switch is disabled when the output–enable (OE) input is high.

This device is fully specified for partial–power–down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high–impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current–sinking capability of the driver.

filter

查找其他协议和总线开关和多路复用器

下载观看带字幕的视频视频

技术文档

未找到结果。请清除搜索并重试。

查看全部 4

顶层文档	类型	标题	格式选项	下载最新的英语版本		日期
*	数据表	SN74CBTLV1G125 数据表 (Rev. H)				2006-3-29
	应用手册	选择正确的德州仪器 (TI) 信号开关 (Rev. E)	PDF \| HTML	英语版 (Rev.E)	PDF \| HTML	2022-8-5
	应用手册	多路复用器和信号开关词汇表 (Rev. B)		英语版 (Rev.B)	PDF \| HTML	2022-3-11
	应用简报	利用关断保护信号开关消除电源时序 (Rev. C)		英语版 (Rev.C)	PDF \| HTML	2021-10-21