SN74AXCH2T45
- Fully configurable dual-rail design allows each port to operate with a power supply range from 0.65 V to 3.6 V
- Operating temperature from –40°C to +125°C
- Glitch-free power supply sequencing
- Up to 380 Mbps support when translating from 1.8 V to 3.3 V
- VCC isolation feature
- If either VCC input is below 100 mV, all I/O outputs are disabled and become high impedance
- Ioff supports partial-power-down mode operation
- Compatible with AVC family level shifters
- Latch-up performance exceeds 100 mA per JESD 78, Class II
- ESD protection exceeds JESD 22
- 8000-V human-body model (HBM)
- 1000-V charged-device model (CDM)
The SN74AXCH2T45 is a two-bit non-inverting bus transceiver that uses two individually configurable power-supply rails. The device is operational with both VCCA and VCCB supplies as low as 0.65 V. The A port is designed to track VCCA, which accepts any supply voltage from 0.65 V to 3.6 V. The B port is designed to track VCCB, which also accepts any supply voltage from 0.65 V to 3.6 V. Additionally the SN74AXCH2T45 is compatible with a single-supply system.
The SN74AXCH2T45 device is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level of the direction-control input (DIR). The SN74AXCH2T45 device is designed so the control pin (DIR) is referenced to VCCA.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended. If a supply is present for VCCA or VCCB, the bus-hold circuitry always remains active on the A or B inputs respectively, independent of the state of the direction control pin.
This device is fully specified for partial-power-down applications using the Ioff current. The Ioff protection circuitry ensures that no excessive current is drawn from or to an input, output, or combined I/O that is biased to a specific voltage while the device is powered down.
The VCC isolation feature ensures that if either VCCA or VCCB is less than 100 mV, both I/O ports enter a high-impedance state by disabling their outputs.
Glitch-free power supply sequencing allows either supply rail to be powered on or off in any order while providing robust power sequencing performance.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | SN74AXCH2T45 2-Bit Bus Transceiver with Configurable Level-Shifting and Bus-Hold Inputs 数据表 | PDF | HTML | 2016-11-16 | ||
| 应用手册 | 原理图检查清单 - 使用自动双向转换器进行设计的指南 | PDF | HTML | 英语版 | PDF | HTML | 2024-12-3 | |
| 应用手册 | 原理图检查清单 - 使用固定或方向控制转换器进行设计的指南 | PDF | HTML | 英语版 | PDF | HTML | 2024-10-3 | |
| 应用手册 | Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) | PDF | HTML | 2024-7-3 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
5-8-LOGIC-EVM — 支持 5 至 8 引脚 DCK、DCT、DCU、DRL 和 DBV 封装的通用逻辑评估模块
AVCLVCDIRCNTRL-EVM — 通用 EVM，适用于支持 AVC 和 LVC 的方向控制双向转换器件
通用 EVM 设计用于支持单通道、双通道、四通道和八通道 LVC 和 AVC 方向控制转换器件。它还能在相同的通道数量下支持总线保持和汽车 Q1 器件。AVC 是具有 12mA 较低驱动强度的低电压转换器件。LVC 是 1.65V 至 5.5V 的较高电压转换器件，具有 32mA 的较高驱动强度。
AXC2T-SMALLPKGEVM — 适用于 DTM 和 RSW 封装器件的 AXC2T 小型封装评估模块
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| VSSOP (DCU) | 8 | Ultra Librarian |
| X2SON (DTM) | 8 | Ultra Librarian |