PCM1808
- 24-Bit Delta-Sigma Stereo A/D Converter
- Single-Ended Voltage Input: 3 Vp-p
- High Performance:
- THD+N: –93 dB (Typical)
- SNR: 99 dB (Typical)
- Dynamic Range: 99 dB (Typical)
- Oversampling Decimation Filter:
- Oversampling Frequency: ×64
- Pass-Band Ripple: ±0.05 dB
- Stop-Band Attenuation: –65 dB
- On-Chip High-Pass Filter: 0.91 Hz (48 kHz)
- Flexible PCM Audio Interface
- Master- or Slave-Mode Selectable
- Data Formats: 24-Bit I2S, 24-Bit Left-Justified
- Power Down and Reset by Halting System Clock
- Analog Antialias LPF Included
- Sampling Rate: 8 kHz–96 kHz
- System Clock: 256 fS, 384 fS, 512 fS
- Resolution: 24 Bits
- Dual Power Supplies:
- 5-V for Analog
- 3.3-V for Digital
- Package: 14-Pin TSSOP
The PCM1808 device is a high-performance, low-cost, single-chip, stereo analog-to-digital converter with single-ended analog voltage input. The PCM1808 device uses a delta-sigma modulator with 64-times oversampling and includes a digital decimation filter and high-pass filter that removes the dc component of the input signal. For various applications, the PCM1808 device supports master and slave mode and two data formats in serial audio interface.
The PCM1808 device supports the power-down and reset functions by means of halting the system clock.
The PCM1808 device is suitable for wide variety of cost-sensitive consumer applications requiring good performance and operation with a 5-V analog supply and 3.3-V digital supply. Fabrication of the PCM1808 device uses a highly advanced CMOS process. The device is available in a small, 14-pin TSSOP package.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | PCM1808 Single-Ended, Analog-Input 24-Bit, 96-kHz Stereo ADC 数据表 (Rev. B) | PDF | HTML | 2006-10-30 | ||
| 用户指南 | DEM-DAI1808 User's Guide | 2006-8-6 |
设计与开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PCM1808EVM — PCM1808 具有单端输入的 24 位、99dB SNR、96kHz 立体声 ADC 评估模块
PCM1808 评估模块 (EVM) 用于演示 PCM1808 产品的性能和功能。PCM1808 是一款具有单端模拟电压输入的高性能、低成本、单芯片、立体声模数转换器 (ADC)。
TIDA-00232 — 无线低音炮放大器参考设计
该无线低音炮放大器参考设计展示了将无线连接集成到传统模拟输入低音炮设计的便利性。有线或无线模式由 MSP430 控制。该参考设计包含一个高性能立体声数字音频放大系统,并配有用于监控和控制的软件。此设计采用 CC8520 PurePath 音频无线射频 SoC 模块在无线模式下实现音频流式传输。本文提供了参考设计中使用的电路板和 EVM 的原理图、物料清单以及设计注意事项。
TIDC-WL1837MOD-AUDIO-MULTIROOM-CAPE — TI WiLink™ 8 Wi-Fi®/Bluetooth®/低功耗蓝牙音频多室 Cape 参考设计
TI WiLink™ 8 WL1837MOD 音频 Cape 是一款无线多室音频参考设计,可与 BeagleBone Black(采用 TI Sitara™ AM335x)配合使用。通过使用 WiLink 8 器件捕获和登记所连接 AP 信标的精确到达时间的 WLAN 功能,在连接的多个音频设备之间实现超精确同步。WiLink 8 模块 (WL1837MOD) 提供集成的 Wi-Fi®/Bluetooth®/低功耗蓝牙解决方案,具有 2.4GHz MIMO 和 5GHz 频带上的天线分集功能。 该模块提供一流的音频解决方案,具有多室 Airplay® (...)
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| TSSOP (PW) | 14 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。