产品详情

Rating Catalog Architecture Gate driver Control topology Sensorless, Trapezoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 60 Features 120 or 150 degree modulation for improved acoustic performance, Code-free high speed sensorless trapezoidal control, Configurable motor startup and stop options, Fast Deceleration (<150 ms), Fast startup time (<50 ms), Integrated protections UVLO,OCP,OTW-OTSD,AVS, Optional closed loop speed control, Stand-alone operation, Up to 3 kHz (electrical frequency), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Gate driver Control topology Sensorless, Trapezoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 60 Features 120 or 150 degree modulation for improved acoustic performance, Code-free high speed sensorless trapezoidal control, Configurable motor startup and stop options, Fast Deceleration (<150 ms), Fast startup time (<50 ms), Integrated protections UVLO,OCP,OTW-OTSD,AVS, Optional closed loop speed control, Stand-alone operation, Up to 3 kHz (electrical frequency), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
WQFN (REE) 36 20 mm² (4 mm × 5 mm)
  • Three-phase BLDC gate driver with integrated sensorless motor control algorithm
    • Code-free high speed Trapezoidal Control
    • Supports up to 3 kHz (electrical frequency)
    • Very fast startup time (<50 ms)
    • Fast Deceleration (<150 ms)
    • Supports 120° or 150° modulation to improve acoustic performance
    • Forward and reverse windmilling support
    • Analog, PWM, freq. or I2C based control input
    • Configurable motor startup and stop options
    • Optional closed loop speed or power control, open loop voltage control
    • 5-point configurable reference profile support
    • Anti-voltage surge prevents overvoltage
    • Variable monitoring through DACOUT
  • 65-V Three phase half-bridge gate driver
    • Drives 3 high-side and 3 low-side N-Channel MOSFETs, 4.5 to 60-V operating voltage
    • Supports 100% PWM duty cycle
    • Bootstrap based gate driver architecture
    • 1-A/2-A Maximum peak source/sink current
  • Integrated current sense amplifier
    • Adjustable gain (5, 10, 20, 40 V/V)
  • Low power sleep mode
    • 5-µA (maximum) at VPVDD = 24-V, TA = 25°C
  • Speed loop accuracy: < 3% with internal clock
  • Supports up to 100-kHz PWM frequency
  • Accurate LDO (AVDD) 3.3-V ±3%, 50-mA support with AVDD connected to VREG
  • Independent driver shutdown path (DRVOFF)
  • Spread spectrum for EMI mitigation
  • Suite of Integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Motor lock detection (3 different types)
    • Overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface
  • Three-phase BLDC gate driver with integrated sensorless motor control algorithm
    • Code-free high speed Trapezoidal Control
    • Supports up to 3 kHz (electrical frequency)
    • Very fast startup time (<50 ms)
    • Fast Deceleration (<150 ms)
    • Supports 120° or 150° modulation to improve acoustic performance
    • Forward and reverse windmilling support
    • Analog, PWM, freq. or I2C based control input
    • Configurable motor startup and stop options
    • Optional closed loop speed or power control, open loop voltage control
    • 5-point configurable reference profile support
    • Anti-voltage surge prevents overvoltage
    • Variable monitoring through DACOUT
  • 65-V Three phase half-bridge gate driver
    • Drives 3 high-side and 3 low-side N-Channel MOSFETs, 4.5 to 60-V operating voltage
    • Supports 100% PWM duty cycle
    • Bootstrap based gate driver architecture
    • 1-A/2-A Maximum peak source/sink current
  • Integrated current sense amplifier
    • Adjustable gain (5, 10, 20, 40 V/V)
  • Low power sleep mode
    • 5-µA (maximum) at VPVDD = 24-V, TA = 25°C
  • Speed loop accuracy: < 3% with internal clock
  • Supports up to 100-kHz PWM frequency
  • Accurate LDO (AVDD) 3.3-V ±3%, 50-mA support with AVDD connected to VREG
  • Independent driver shutdown path (DRVOFF)
  • Spread spectrum for EMI mitigation
  • Suite of Integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Motor lock detection (3 different types)
    • Overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface

The MCT8329A provides a single-chip, code-free sensorless trapezoidal solution for applications requiring high speed operation or very fast startup time for three phase brushless-DC motors. The device provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support 100% duty cycle. The gate drive architecture supports peak gate drive currents up to 1-A source and 2-A sink. The MCT8329A can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

Sensorless trapezoidal control is highly configurable through register settings in a non-volatile EEPROM (MCT8329A1I) ranging from motor start-up behavior to closed loop operation, which allows the device to operate stand-alone once it has been configured. Motor current is sensed using an integrated current sensing amplifier supporting single external shunt resistor. The device receives a speed command through a PWM input or analog voltage or variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCT8329A, intended to protect the device, motor, and system against fault events.

The MCT8329A provides a single-chip, code-free sensorless trapezoidal solution for applications requiring high speed operation or very fast startup time for three phase brushless-DC motors. The device provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support 100% duty cycle. The gate drive architecture supports peak gate drive currents up to 1-A source and 2-A sink. The MCT8329A can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

Sensorless trapezoidal control is highly configurable through register settings in a non-volatile EEPROM (MCT8329A1I) ranging from motor start-up behavior to closed loop operation, which allows the device to operate stand-alone once it has been configured. Motor current is sensed using an integrated current sensing amplifier supporting single external shunt resistor. The device receives a speed command through a PWM input or analog voltage or variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCT8329A, intended to protect the device, motor, and system against fault events.

下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同但引脚有所不同。
MCF8329A 正在供货 60V、无传感器、磁场定向控制 (FOC) 三相 BLDC 栅极驱动器 FOC version
功能与比较器件相似。
MCT8316A 正在供货 40V 最大电压、8A 峰值电流无传感器梯形控制三相 BLDC 电机驱动器 Integrated FETs for up to 70 W of power

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

MCT8329EVM — MCT8329 三相无传感器梯形 BLDC 栅极驱动器评估模块

MCT8329 是一款具有无代码无传感器梯形控制的 4.5V 至 60V 三相 BLDC 栅极驱动器 IC,适用于电机驱动应用。它具有三个半桥栅极驱动器,每个驱动器都能够驱动高侧和低侧 N 沟道功率 MOSFET。

该器件使用内部电荷泵生成合适的栅极驱动电压,使用自举电路增强高侧 MOSFET。具有涓流电荷泵,支持 100% 占空比。此栅极驱动架构支持高达 1A 的栅极驱动峰值拉电流和 2A 的栅极驱动峰值灌电流。  

该 EVM 包含用于连接 MCT8329AEVM GUI 的板载 MSP430 (MSP430FR2355)。

用户指南: PDF | HTML
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
评估模块 (EVM) 用 GUI

MCT8329A-GUI — GUI for the MCT8329EVM

GUI used to evaluate MCT8329A on the MCT8329EVM
支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
WQFN (REE) 36 Ultra Librarian

订购和质量

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频