主页 电池管理 IC 电池电量监测
主页
电池管理 IC
电池电量监测

BQ27Z558

正在供货

支持 1.2V IO 的单节电池 Impedance Track™ 技术电池电量监测计

立即订购
数据表
用户指南

BQ27Z558

正在供货
数据表 立即订购

产品详情

Cell chemistry Li-Ion/Li-Polymer, LiFePO4 Number of series cells Single Cell Communication interface HDQ, I2C Battery capacity (min) (mAh) 100 Battery capacity (max) (mAh) 32000 Implementation Pack External capacity indication None Features Impedance Track™ algorithm, SHA-256 Authentication Operating temperature range (°C) -40 to 85 Rating Catalog
Cell chemistry Li-Ion/Li-Polymer, LiFePO4 Number of series cells Single Cell Communication interface HDQ, I2C Battery capacity (min) (mAh) 100 Battery capacity (max) (mAh) 32000 Implementation Pack External capacity indication None Features Impedance Track™ algorithm, SHA-256 Authentication Operating temperature range (°C) -40 to 85 Rating Catalog
DSBGA (YPH) 12 2.8896 mm² (2.064 mm × 1.4 mm)
  • Supports high-side and low-side current sense resistors down to 1 mΩ
  • Supports pack-side gauging including enhanced state of health (SOH) algorithm
  • Fast QMax update option based on predicted OCV
  • SHA-256 authentication responder for increased battery pack security
  • Sophisticated charge algorithms
    • JEITA
    • Enhanced charging
    • RSOC charging compensation option
  • Two independent ADCs
    • Support for simultaneous current and voltage sampling
    • High-accuracy coulomb counter with input offset error < 1 µV (typical)
  • Low-voltage (2-V) operation
  • Wide-range current applications (1 mA to > 5 A)
  • Active high or low pulse or level interrupt pin
  • Supports battery trip point (BTP)
  • Reduced power modes (typical battery pack operating range conditions)
    • Typical SLEEP mode: < 11 µA
    • Typical DEEP SLEEP mode: < 9 µA
    • Typical HIBERNATE mode: < 3 µA
    • Typical OFF mode: < 1.9 µA
  • Internal and external temperature sense functions
  • Diagnostic lifetime data monitor and black box recorder
  • 400-kHz I 2C bus communications interface, including a 1.2-V logic level for high-speed programming and data access
  • HDQ one-wire for communication with host
  • Compact 12-pin DSBGA package (YPH)
  • Supports high-side and low-side current sense resistors down to 1 mΩ
  • Supports pack-side gauging including enhanced state of health (SOH) algorithm
  • Fast QMax update option based on predicted OCV
  • SHA-256 authentication responder for increased battery pack security
  • Sophisticated charge algorithms
    • JEITA
    • Enhanced charging
    • RSOC charging compensation option
  • Two independent ADCs
    • Support for simultaneous current and voltage sampling
    • High-accuracy coulomb counter with input offset error < 1 µV (typical)
  • Low-voltage (2-V) operation
  • Wide-range current applications (1 mA to > 5 A)
  • Active high or low pulse or level interrupt pin
  • Supports battery trip point (BTP)
  • Reduced power modes (typical battery pack operating range conditions)
    • Typical SLEEP mode: < 11 µA
    • Typical DEEP SLEEP mode: < 9 µA
    • Typical HIBERNATE mode: < 3 µA
    • Typical OFF mode: < 1.9 µA
  • Internal and external temperature sense functions
  • Diagnostic lifetime data monitor and black box recorder
  • 400-kHz I 2C bus communications interface, including a 1.2-V logic level for high-speed programming and data access
  • HDQ one-wire for communication with host
  • Compact 12-pin DSBGA package (YPH)

The Texas Instruments BQ27Z558 Impedance Track™ gas gauge solution is a highly integrated, accurate 1-series cell gas gauge with a flash programmable custom reduced instruction-set CPU (RISC) and SHA-256 authentication for Li-ion and Li-polymer battery packs. The 1-series cell capability includes parallel cells for increased capacity.

The BQ27Z558 gas gauge communicates through I 2C-compatible and HDQ one-wire interfaces and includes several key features that can help facilitate accurate gas gauging applications. Integrated temperature sense functions (internal and external options) enable system and battery temperature measurements.

The Texas Instruments BQ27Z558 Impedance Track™ gas gauge solution is a highly integrated, accurate 1-series cell gas gauge with a flash programmable custom reduced instruction-set CPU (RISC) and SHA-256 authentication for Li-ion and Li-polymer battery packs. The 1-series cell capability includes parallel cells for increased capacity.

The BQ27Z558 gas gauge communicates through I 2C-compatible and HDQ one-wire interfaces and includes several key features that can help facilitate accurate gas gauging applications. Integrated temperature sense functions (internal and external options) enable system and battery temperature measurements.
filter 查找其他 电池电量监测
下载 观看带字幕的视频 视频

技术文档

未找到结果。请清除搜索并重试。
查看全部 3
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 BQ27Z558 Impedance Track™ Battery Gas Gauge Solutionfor 1-Series Cell Li-Ion Battery Packs, with 1.2-V IO Support 数据表 PDF | HTML 2023-11-10
* 用户指南 BQ27Z561-R2 and BQ27Z558 Technical Reference Manual (Rev. C) PDF | HTML 2024-3-3
应用手册 如何创建认证密钥并将其编程到 TI 电池电量监测计中 PDF | HTML 英语版 PDF | HTML 2025-3-14

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

BQ27Z558EVM-084 — BQ27Z558 采用单芯 Impedance Track™ 技术的电量监测计评估模块

BQ27Z558 评估模块 (EVM) 是适用于 BQ27Z558 电池电量监测计的开发平台。该电路模块包含 BQ27Z558 集成电路 (IC) 以及监控和预测单节锂离子或锂聚合物电池容量所必需的所有其他元件。

用户指南: PDF | HTML
支持的产品和硬件
有库存
限制：
??asset.out-of-stock-ti_zh_CN??
无货
软件编程工具

BQ-BMS-PROGRAMMER-SW — Command line programmers for BQ products

BQ-BATTERY-PROGRAMMER-SW 软件开发套件 (SDK) 是一组强大的软件命令行工具，可在对使用 TI 电池管理产品的电池包进行编程、测试或组装的过程中提供帮助。该软件中的可执行文件支持用于 EV2300 通信收发器的 MKST-3P-ALT-EV2300 MKS Technology 替代产品。可执行文件可与单个站配合使用，但可以通过使用 MKS Technology Inc. 提供的其他软件和 GUI 扩展到多个站。本软件不支持多个站。

每个下载中有多个可执行文件，通常每个平台一个。还支持 BQ20xxx 和 BQ30xxx 等较旧的产品。提供了使用 C++ 编程语言 (...)

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
DSBGA (YPH) 12 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频