主页 电池管理 IC 电池充电器 IC
主页
电池管理 IC
电池充电器 IC

BQ24640

正在供货

适用于超级电容器的独立 1 至 8 节降压电池充电控制器

立即订购
数据表

BQ24640

正在供货
数据表 立即订购

产品详情

Rating Catalog Number of series cells 1, 2, 3, 4, 5, 6, 7, 8 Cell chemistry SuperCap Charge current (max) (A) 10 Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 5 Vin (max) (V) 28 Absolute max Vin (max) (V) 33 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 2.1 Battery charge voltage (max) (V) 26 Control interface Standalone (RC-Settable) Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1, 2, 3, 4, 5, 6, 7, 8 Cell chemistry SuperCap Charge current (max) (A) 10 Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 5 Vin (max) (V) 28 Absolute max Vin (max) (V) 33 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 2.1 Battery charge voltage (max) (V) 26 Control interface Standalone (RC-Settable) Operating temperature range (°C) -40 to 85
VQFN (RVA) 16 12.25 mm² (3.5 mm × 3.5 mm)
  • Charge Super Capacitor Pack From 2.1 V to 26 V
  • CC/CV Charge Profile From 0 V Without
    Precharge
  • 600-kHz NMOS-NMOS Synchronous Buck
    Controller
  • Over 90% Efficiency for up to 10-A Charge
    Current
  • 5-V to 28-V VCC Input Voltage Range
  • Accuracy
    • ±0.5% Charge Voltage Regulation
    • ±3% Charge Current Regulation
  • High Integration
    • Internal Loop Compensation
    • Internal Digital Soft Start
  • Safety
    • Input Overvoltage Protection
    • Capacitor Temperature Sensing Hot and Cold
      Charge Suspend
    • Thermal Shutdown
  • Status Outputs
    • Adapter Present
    • Charger Operation Status
  • Charge Enable Pin
  • 30-ns Driver Dead Time and 99.5% Maximum
    Effective Duty Cycle
  • Automatic Sleep Mode for Low Power
    Consumption
    • <15-µA Off-State Super Capacitor Discharge
      Current
    • <1.5-mA Off-State Input Quiescent Current
  • APPLICATIONS
    • Memory Backup Systems
    • Industrial UPS Systems and Power Transient Buffering
    • Bridge Power to Buffer the Battery

All other trademarks are the property of their respective owners
  • Charge Super Capacitor Pack From 2.1 V to 26 V
  • CC/CV Charge Profile From 0 V Without
    Precharge
  • 600-kHz NMOS-NMOS Synchronous Buck
    Controller
  • Over 90% Efficiency for up to 10-A Charge
    Current
  • 5-V to 28-V VCC Input Voltage Range
  • Accuracy
    • ±0.5% Charge Voltage Regulation
    • ±3% Charge Current Regulation
  • High Integration
    • Internal Loop Compensation
    • Internal Digital Soft Start
  • Safety
    • Input Overvoltage Protection
    • Capacitor Temperature Sensing Hot and Cold
      Charge Suspend
    • Thermal Shutdown
  • Status Outputs
    • Adapter Present
    • Charger Operation Status
  • Charge Enable Pin
  • 30-ns Driver Dead Time and 99.5% Maximum
    Effective Duty Cycle
  • Automatic Sleep Mode for Low Power
    Consumption
    • <15-µA Off-State Super Capacitor Discharge
      Current
    • <1.5-mA Off-State Input Quiescent Current
  • APPLICATIONS
    • Memory Backup Systems
    • Industrial UPS Systems and Power Transient Buffering
    • Bridge Power to Buffer the Battery

All other trademarks are the property of their respective owners

The bq24640 device is a highly integrated switched-mode super capacitor charge controller. The device offers a constant-frequency synchronous PWM controller with high accuracy charge current, voltage regulation, and charge status monitoring.

The bq24640 charges a super capacitor in two phases: constant current and constant voltage (CC/CV). The device can charge super capacitors from 0 V with current set on the ISET pin. When the super capacitor voltage reaches the programmed target voltage, charge current begins tapering down.

The bq24640 enters a low-current sleep mode
(<15 µA) when the input voltage falls below the output capacitor voltage.

The bq24640 has an input CE pin to enable and disable charge, and the STAT and PG output pins report charge and adapter status. The TS pin on the bq24640 monitors the temperature of the capacitor and suspends charge during hot and cold conditions.

The bq24640 device is a highly integrated switched-mode super capacitor charge controller. The device offers a constant-frequency synchronous PWM controller with high accuracy charge current, voltage regulation, and charge status monitoring.

The bq24640 charges a super capacitor in two phases: constant current and constant voltage (CC/CV). The device can charge super capacitors from 0 V with current set on the ISET pin. When the super capacitor voltage reaches the programmed target voltage, charge current begins tapering down.

The bq24640 enters a low-current sleep mode
(<15 µA) when the input voltage falls below the output capacitor voltage.

The bq24640 has an input CE pin to enable and disable charge, and the STAT and PG output pins report charge and adapter status. The TS pin on the bq24640 monitors the temperature of the capacitor and suspends charge during hot and cold conditions.
filter 查找其他 电池充电器 IC
下载 观看带字幕的视频 视频

技术文档

未找到结果。请清除搜索并重试。
查看全部 3
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 bq24640 High-Efficiency Synchronous Switched-Mode Super Capacitor Charger 数据表 (Rev. A) PDF | HTML 2015-7-31
应用手册 如何快速安全地为超级电容器充电 PDF | HTML 英语版 PDF | HTML 2023-3-28
应用手册 BQ241xx/BQ246xx Selection of Multi-Cell Standalone Switching Battery Chargers 2019-12-31

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

BQ24640EVM — 用于 BQ24640 多节同步开关模式充电器的评估模块

bq24600/bq24620/bq24640 评估模块。bq2461x 是高度集成的锂离子或锂聚合物开关模式电池充电控制器。bq2463x 是高度集成的开关模式电池充电控制器，专为磷酸锂电池化学物充电而设计。bq24640 是高度集成的超级电容器开关模式充电控制器。它们可以为恒频同步 PWM 控制器提供高准确度充电电流和电压调节、适配器电流调节、终止、充电预处理和充电状态监控。bq24600/bq24620 (...)

用户指南: PDF
支持的产品和硬件
有库存
限制：
??asset.out-of-stock-ti_zh_CN??
无货
计算工具

SLUC175 — bq246xx Calculation Tool V1.5

支持的产品和硬件
参考设计

PMP7327 — 28Vdc Input Super Cap Charger with Boost Converter for Bus Holdup

此参考设计使用 BQ24640 超级电容器充电控制器来为一大堆超级电容器充电，使这些电容器的电压低于输入总线电压。在输入总线压差期间，超级电容器的电量用于为升压转换器供电，可提 供 10A 的输出电流 (26.2V)。此输出电流可用于保持总线电压长达 10 秒（即保持 260W 10 秒）。

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
VQFN (RVA) 16 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频