主页 数据转换器 模数转换器 (ADC) 精密 ADC
主页
数据转换器
模数转换器 (ADC)
精密 ADC

ADC12130

正在供货

具有 2 通道多路复用器和采样/保持功能的自校准 12 位 + 串行 I/O 模数转换器

立即订购
数据表

可提供此产品的更新版本

open-in-new 比较替代产品
功能与比较器件相同但引脚有所不同。
ADC122S625 正在供货 双通道 12 位、50kSPS 至 200kSPS、同步采样模数转换器 Simultaneous sampling ADC

ADC12130

正在供货
数据表 立即订购

产品详情

Resolution (Bits) 12 Sample rate (max) (ksps) 114 Number of input channels 2 Interface type Microwire (Serial I/O), SPI Architecture SAR Input type Differential, Pseudo-Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 5.5 Input voltage range (min) (V) 0 Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 22.5 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 5.5 Digital supply (min) (V) 3 Digital supply (max) (V) 5.5
Resolution (Bits) 12 Sample rate (max) (ksps) 114 Number of input channels 2 Interface type Microwire (Serial I/O), SPI Architecture SAR Input type Differential, Pseudo-Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 5.5 Input voltage range (min) (V) 0 Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 22.5 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 5.5 Digital supply (min) (V) 3 Digital supply (max) (V) 5.5
SOIC (DW) 16 106.09 mm² (10.3 mm × 10.3 mm)
  • Serial I/O (MICROWIRE, SPI and QSPI Compatible)
  • Power Down Mode
  • Programmable Acquisition Time
  • Variable Digital Output Word Length and Format
  • No Zero or Full Scale Adjustment Required
  • 0V to 5V Analog Input Range with Single 5V Power Supply

Key Specifications

  • Resolution 12-bit plus sign
  • 12-Bit plus sign conversion time 8.8 μs (max)
  • 12-Bit plus sign throughput time 14 μs (max)
  • Integral Linearity Error ±2 LSB (max)
  • Single Supply 3.3V or 5V ±10%
  • Power Consumption
    • +3.3V 15 mW (max)
    • +3.3V power down 40 μW (typ)
    • +5V 33 mW (max)
    • +5V power down 100 μW (typ)

All trademarks are the property of their respective owners.

  • Serial I/O (MICROWIRE, SPI and QSPI Compatible)
  • Power Down Mode
  • Programmable Acquisition Time
  • Variable Digital Output Word Length and Format
  • No Zero or Full Scale Adjustment Required
  • 0V to 5V Analog Input Range with Single 5V Power Supply

Key Specifications

  • Resolution 12-bit plus sign
  • 12-Bit plus sign conversion time 8.8 μs (max)
  • 12-Bit plus sign throughput time 14 μs (max)
  • Integral Linearity Error ±2 LSB (max)
  • Single Supply 3.3V or 5V ±10%
  • Power Consumption
    • +3.3V 15 mW (max)
    • +3.3V power down 40 μW (typ)
    • +5V 33 mW (max)
    • +5V power down 100 μW (typ)

All trademarks are the property of their respective owners.

NOTE: Some device/package combinations are obsolete and are described and shown here for reference only. See our web site for product availability.

The ADC12130, ADC12132 and ADC12138 are 12-bit plus sign successive approximation Analog-to-Digital converters with serial I/O and configurable input multiplexer. The ADC12132 and ADC12138 have a 2 and an 8 channel multiplexer, respectively. The differential multiplexer outputs and ADC inputs are available on the MUXOUT1, MUXOUT2, A/DIN1 and A/DIN2 pins. The ADC12130 has a two channel multiplexer with the multiplexer outputs and ADC inputs internally connected. The ADC12130 family is tested and specified with a 5 MHz clock. On request, these ADCs go through a self calibration process that adjusts linearity, zero and full-scale errors to typically less than ±1 LSB each.

The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes. A fully differential unipolar analog input range (0V to +5V) can be accommodated with a single +5V supply. In the differential modes, valid outputs are obtained even when the negative inputs are greater than the positive because of the 12-bit plus sign output data format.

The serial I/O is configured to comply with NSC MICROWIRE. For voltage references, see the LM4040, LM4050 or LM4041.

NOTE: Some device/package combinations are obsolete and are described and shown here for reference only. See our web site for product availability.

The ADC12130, ADC12132 and ADC12138 are 12-bit plus sign successive approximation Analog-to-Digital converters with serial I/O and configurable input multiplexer. The ADC12132 and ADC12138 have a 2 and an 8 channel multiplexer, respectively. The differential multiplexer outputs and ADC inputs are available on the MUXOUT1, MUXOUT2, A/DIN1 and A/DIN2 pins. The ADC12130 has a two channel multiplexer with the multiplexer outputs and ADC inputs internally connected. The ADC12130 family is tested and specified with a 5 MHz clock. On request, these ADCs go through a self calibration process that adjusts linearity, zero and full-scale errors to typically less than ±1 LSB each.

The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes. A fully differential unipolar analog input range (0V to +5V) can be accommodated with a single +5V supply. In the differential modes, valid outputs are obtained even when the negative inputs are greater than the positive because of the 12-bit plus sign output data format.

The serial I/O is configured to comply with NSC MICROWIRE. For voltage references, see the LM4040, LM4050 or LM4041.
filter 查找其他 精密 ADC
下载 观看带字幕的视频 视频

技术文档

未找到结果。请清除搜索并重试。
查看全部 2
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 ADC12130/32/38 Self-Cal 12-Bit + Serial I/O ADC w/MUX and Sample/Hold 数据表 (Rev. G) 2013-3-25
电子书 Best of Baker's Best: Precision Data Converters -- SAR ADCs 2015-5-21

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

设计工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
SOIC (DW) 16 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频