SN55LVTA4-SEP
- VID V62/25605-01XE
- Total ionizing dose characterized at 30krad (Si)
- Total ionizing dose radiation lot acceptance testing (TID RLAT) for every wafer lot to 30krad (Si)
- Single-event effects (SEE) characterized:
- Single event latch-up (SEL) immune to linear energy transfer (LET) = 50MeV-cm2 /mg
- Single event transient (SET) characterized to 50MeV-cm2/mg.
- Meet or exceed the requirements of ANSI TIA/EIA-644 standard
- Low-voltage differential signaling with typical output voltage of 350mV and 100Ω load
- Typical output voltage rise and fall times of 500ps (400Mbps)
- Typical propagation delay times of 1.7ns
- Operate from a single 3.3V supply
- Power dissipation 25mW typical per driver at 200MHz
- Driver at high impedance when disabled or with VCC = 0
- Bus-terminal ESD protection exceeds 8kV
- Low-voltage TTL (LVTTL) logic input levels
- Cold sparing for space and high reliability applications requiring redundancy
- Space enhanced plastic (SEP)
- Controlled baseline
- Gold wire, NiPdAu lead finish
- One assembly and test site, one fabrication site
- Extended product life cycle
- Military (–55°C to 125°C) temperature range
- Product traceability
- Meets NASA ASTM E595 outgassing specification
The SN55LVTA4-SEP is a differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS) with a 3.3V supply. This driver delivers a minimum differential output voltage magnitude of 247mV into a 100Ω load when enabled.
The intended application of this device and signaling technique is both point-to-point and multi-drop (one driver and multiple receivers) data transmission over controlled impedance media of approximately 100Ω. The transmission media can be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.
The SN55LVTA4-SEP is characterized for operation from –55°C to 125°C.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | SN55LVTA4-SEP Radiation Tolerant Quad Channel High-Speed Differential Line Driver datasheet (Rev. A) | PDF | HTML | 2025. 6. 30 | |
| * | 방사능 및 안정성 보고서 | SN55LVTA4-SEP Single-Event Effects (SEE) Radiation Report | PDF | HTML | 2025. 6. 23 | |
| * | 방사능 및 안정성 보고서 | SN55LVTA4-SEP Total Ionizing Dose (TID) Report | PDF | HTML | 2025. 6. 23 | |
| * | 방사능 및 안정성 보고서 | SN55LVTA4-SEP Production Flow and Reliability Report | PDF | HTML | 2025. 6. 3 | |
| * | VID | SN55LVTA4-SEP VID SN55LVTA4-SEP VID V62/25605 | 2026. 5. 5 | ||
| 선택 가이드 | TI Space Products (Rev. L) | 2026. 3. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
SN65LVDS31-33EVM — SN65LVDS31 및 SN65LVDS33용 평가 모듈
TI offers a series of low-voltage differential signaling (LVDS) evaluation modules (EVMs) designed for analysis of the electrical characteristics of LVDS drivers and receivers. Four unique EVMs are available to evaluate the different classes of LVDS devices offered by TI.
As seen in the Combination (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.