LP87702-Q1
- AEC-Q100 Qualified for Automotive Applications:
- Device Temperature Grade 1: –40°C to +125°C, TA
-
Functional Safety Quality-Managed
- Documentation Available to Aid Functional Safety System Design
- Two Inputs for External Voltage Monitoring
- Two Programmable Power-Good Signals
- Dedicated Reference Voltage for Diagnostics
- Window Watchdog with Reset Output
- Output Short-Circuit and Overload Protection
- Overtemperature Warning and Protection
- Overvoltage Protection (OVP) and Undervoltage Lockout (UVLO)
- Two High-Efficiency Step-Down DC/DC converters:
- Maximum Output Current 3.5 A
- 2-MHz, 3-MHz, or 4-MHz Switching Frequency
- Auto PWM/PFM and Forced-PWM Operations
- Output Voltage = 0.7 V to 3.36 V
- 5-V Boost Converter
- Maximum Output Current 600 mA
- External Clock Input to Synchronize Switching
- Spread-Spectrum Modulation
- Programmable Start-up and Shutdown Delays and Sequencing with Enable Signal
- Configurable General Purpose Outputs (GPOs)
- I2C-Compatible Interface Supporting Standard (100 kHz), Fast (400 kHz), Fast+ (1 MHz), and High-Speed (3.4 MHz) Modes
- Interrupt Function with Programmable Masking
The LP87702-Q1helps meet the power management requirements of the latest platforms, particularly in automotive radar and camera and industrial radar applications. The device contains two step-down DC/DC converters, and a 5-V boost converter to support safety critical applications. The device integrates two voltage monitoring inputs for external power supplies and a window watchdog.
The automatic PWM/PFM (AUTO mode) operation gives high efficiency over a wide output current range for buck converters. The LP87702-Q1 uses remote voltage sensing to compensate IR drop between the converter output and the point-of-load, thus improving the accuracy of the output voltage.
Programmable start-up and shutdown sequences synchronized to the enable signal are supported, including general purpose digital outputs.
During start-up and voltage change, the device controls the output slew rate for minimum output voltage overshoot and inrush current. This device contains one-time-programmable (OTP) memory. Each orderable part number has specific OTP settings for a given application. Details of the default OTP configuration for each orderable part number can be found in the technical reference manual.
추가 정보 요청
기능 안전 문서 및 기타 정보를 사용할 수 있습니다. 지금 요청
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
전원 공급 솔루션
LP87702-Q1을 포함하는 솔루션을 살펴보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
LP8770Q1EVM — 진단 기능을 지원하는 LP8770-Q1 부스트 및 듀얼 벅 레귤레이터용 평가 모듈
PEET-GUI — TPS6594-Q1, LP8756-Q1, LP8758, LP8770 및 TPS650330-Q1용 효율성 예측 툴
PMP22334 — 고효율, 저잡음 5V/3.3V/1.8V/1.1V 오토모티브 디스플레이 레퍼런스 설계
TIDA-01570 — 개체 데이터 출력을 지원하는 오토모티브 77GHz 레이더 모듈 레퍼런스 설계
TIDA-020004 — 듀얼 CAN FD를 통한 개체 데이터 출력을 지원하는 오토모티브 RFCMOS 77GHz 레이더 모듈 레퍼런스 설계
TIDA-020011 — 차량용 mmWave 레이더 제스처 제어 레퍼런스 설계
TIDEP-01021 — 코너 레이더 레퍼런스 설계용 빔 조정
이 레퍼런스 설계는 AWR1843BOOST 평가 모듈(EVM)을 사용하여 BSD(사각 지대 감지), CTA(후측면 접근 차량 경고), LCA(차선 변경 지원) 및 TJA(교통 체증 지원) 애플리케이션을 위한 기초를 제공합니다. 이 설계를 통해 최대 150m의 FoV(시야)에서 물체의 속도를 예측(방위 평면 및 세로 평면)하고 위치를 추적(방위 평면)할 수 있습니다.
또한 이 설계는 모든 3TX 작동을 동시에 켜서 TX(전송) 빔포밍을 허용합니다. 6비트 TX 위상 시프터를 사용한 빔스티어링도 지원하므로 방위각 방향의 여러 각도로 (...)
TIDEP-01025 — mmWave 진단 및 모니터링 레퍼런스 디자인
이 레퍼런스 설계는 호스트의 처리 부하를 최소화하여 시스템 효율성을 향상시키는 mmWave 레이더 센서에 내장된 자동 모니터링 기능을 보여줍니다. 이 설계에서는 SDL(안전 진단 라이브러리)을 사용하여 프로그래밍 가능한 디지털 코어, 주변 장치 및 메모리에 대한 진단 테스트를 실행합니다. 또한 레퍼런스 설계는 다양한 하드웨어 구성 요소의 RF/아날로그 모니터 기능을 구성하고 지원합니다. 사용자가 다양한 안전 리소스를 사용하여 ASIL-B/SIL2 호환 제품을 구현하도록 지원함으로써 이 설계는 전체 개발 시간과 출시 시간을 (...)
TIPA-050022 — Mobileye EQ6L 분리형 전원 공급 장치 설계
이 전원 공급 장치 설계는 Mobileye EyeQ6Lite® SoC용 TI의 반개별 전원 트리에 대한 테스트 보고서 요약본입니다. ADAS(자율 주행 보조 시스템)와 같은 오토모티브 애플리케이션은 Mobileye EyeQ6L 같은 ADAS 도메인 컨트롤러 프로세서를 사용합니다. 매우 낮은 전압에서 매우 높은 양의 전류를 필요로 하는 정교한 프로세서입니다. 또한 이러한 프로세서는 프로세서 부하 전류의 급격한 변화를 위해 출력 전압의 매우 빠른 과도 응답을 필요로 합니다.
이 전원 공급 장치 설계는 효율적이고 비용 효율적인 방식으로 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.