전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

LMR33620-Q1

활성

3.8V~36V, 2A 동기 스텝다운 전압 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LMR43620-Q1 활성 오토모티브 3V-36V, 2A 저 EMI, 저 IQ를 지원하는 동기식 벅 레귤레이터 Smaller footprint, higher efficiency, lower EMI, lower IQ and spread-spectrum

제품 상세 정보

Rating Automotive Topology Buck Iout (max) (A) 2 Vin (max) (V) 36 Vin (min) (V) 3.8 Vout (max) (V) 34 Vout (min) (V) 1 Features Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, Wettable flanks package EMI features Low parasitic Hotrod packaging Control mode current mode Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 2100 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 24 Duty cycle (max) (%) 98 Type Converter
Rating Automotive Topology Buck Iout (max) (A) 2 Vin (max) (V) 36 Vin (min) (V) 3.8 Vout (max) (V) 34 Vout (min) (V) 1 Features Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, Wettable flanks package EMI features Low parasitic Hotrod packaging Control mode current mode Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 2100 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 24 Duty cycle (max) (%) 98 Type Converter
VQFN-HR (RNX) 12 6 mm² 3 x 2
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Configured for rugged automotive applications
    • Input voltage range: 3.8 V to 36 V
    • Output voltage range: 1 V to 24 V
    • Output current: 2 A
    • 75-mΩ/50-mΩ RDS-ON power MOSFETs
    • Peak-current-mode control
    • Short minimum on-time of 68 ns
    • Frequency: 400 kHz, 1.4 MHz, 2.1 MHz
    • Integrated compensation network
  • Low EMI and switching noise
    • Hotrod™ package
    • Parallel input current paths
  • High power conversation at all loads
    • Peak efficiency > 95%
    • Low shutdown quiescent current of 5 µA
    • Low operating quiescent current of 25 µA
  • Create a custom design using the LMR33620-Q1 with the WEBENCH Power Designer
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Configured for rugged automotive applications
    • Input voltage range: 3.8 V to 36 V
    • Output voltage range: 1 V to 24 V
    • Output current: 2 A
    • 75-mΩ/50-mΩ RDS-ON power MOSFETs
    • Peak-current-mode control
    • Short minimum on-time of 68 ns
    • Frequency: 400 kHz, 1.4 MHz, 2.1 MHz
    • Integrated compensation network
  • Low EMI and switching noise
    • Hotrod™ package
    • Parallel input current paths
  • High power conversation at all loads
    • Peak efficiency > 95%
    • Low shutdown quiescent current of 5 µA
    • Low operating quiescent current of 25 µA
  • Create a custom design using the LMR33620-Q1 with the WEBENCH Power Designer

The LMR33620-Q1 automotive-qualified regulator is an easy-to-use, synchronous, step-down DC/DC converter that delivers best-in-class efficiency for rugged applications. The LMR33620-Q1 drives up to 2 A of load current from an input of up to 36 V. The LMR33620-Q1 provides high light load efficiency and output accuracy in a very small solution size. Features such as a power-good flag and precision enable provide both flexible and easy-to-use solutions for a wide range of applications. The LMR33620-Q1 automatically folds back frequency at light load to improve efficiency. Integration eliminates most external components and provides a pinout designed for simple PCB layout. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, and hiccup short-circuit protection. The LMR33620-Q1 is available in a 12-pin 3 mm × 2 mm next generation VQFN package with wettable flanks.

The LMR33620-Q1 automotive-qualified regulator is an easy-to-use, synchronous, step-down DC/DC converter that delivers best-in-class efficiency for rugged applications. The LMR33620-Q1 drives up to 2 A of load current from an input of up to 36 V. The LMR33620-Q1 provides high light load efficiency and output accuracy in a very small solution size. Features such as a power-good flag and precision enable provide both flexible and easy-to-use solutions for a wide range of applications. The LMR33620-Q1 automatically folds back frequency at light load to improve efficiency. Integration eliminates most external components and provides a pinout designed for simple PCB layout. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, and hiccup short-circuit protection. The LMR33620-Q1 is available in a 12-pin 3 mm × 2 mm next generation VQFN package with wettable flanks.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
7개 모두 보기
유형 직함 날짜
* Data sheet LMR33620-Q1 3.8-V to 36-V, 2-A Synchronous Step-Down Voltage Converter datasheet (Rev. C) PDF | HTML 2020/10/14
Functional safety information LMR336x0-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. C) PDF | HTML 2024/03/22
White paper Demystifying Input Supply Current in DC/DC Regulators:From Shutdown to Full Load (Rev. A) 2023/06/06
Application note Working with Inverting Buck-Boost Converters (Rev. B) PDF | HTML 2022/10/18
Application note PCB Thermal Design Tips for Automotive DC/DC Converters PDF | HTML 2020/11/12
Technical article Optimizing flip-chip IC thermal performance in automotive designs PDF | HTML 2019/12/11
Application note Understanding Mode Transitions for LMR33620/30 and LMR36006/15 2019/04/04

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMR33630ADDAEVM — LMR33630 동기 스텝다운 컨버터 평가 모듈

LMR33630ADDAEVM 평가 모듈(EVM)은 LMR33630 동기 스텝다운 컨버터를 평가할 수 있도록 완전 조립 및 테스트를 거친 회로입니다.  LMR33630는 매우 작은 솔루션 크기로 탁월한 효율성과 정확도를 제공합니다.
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

LMR33630ARNXEVM — LMR33630 동기 스텝다운 컨버터 평가 모듈

LMR33630 평가 모듈(EVM)은 LMR33630A 400kHz 동기 스텝다운 컨버터를 평가할 수 있도록 완조립 및 테스트를 거친 회로입니다.  LMR33630는 매우 작은 솔루션 크기로 탁월한 효율성과 정확도를 제공합니다.
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

LMR33630CDDAEVM — LMR33630 동기 스텝다운 컨버터 평가 모듈

LMR33630 평가 모듈(EVM)은 LMR33630 동기 스텝다운 컨버터를 평가할 수 있도록 완전 조립 및 테스트를 거친 회로입니다.  LMR33630는 매우 작은 솔루션 크기로 탁월한 효율성과 정확도를 제공합니다.
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

LMR33630CRNXEVM — LMR33630 동기 스텝다운 컨버터 평가 모듈

LMR33630 평가 모듈(EVM)은 LMR33630C 2.1MHz 동기 스텝다운 컨버터를 평가할 수 있도록 완조립 및 테스트를 거친 회로입니다.  LMR33630는 매우 작은 솔루션 크기로 탁월한 효율성과 정확도를 제공합니다.
사용 설명서: PDF
TI.com에서 구매 불가
계산 툴

SNVC234 Mode Transitions Calculator LMR336x0 LMR360xx

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
LMR33620 SIMPLE SWITCHER® 3.8V~36V, 2A 동기 벅 컨버터, 초저 EMI LMR33620-Q1 3.8V~36V, 2A 동기 스텝다운 전압 컨버터 LMR33630 SIMPLE SWITCHER® 3.8V~36V, 3A 동기 벅 컨버터, 초저 EMI LMR33630-Q1 3.8V~36V, 3A 동기 스텝다운 전압 컨버터 LMR36006 4.2V~60V, 0.6A 초소형 동기 강압 컨버터 LMR36006-Q1 4.2V~60V, 0.6A 초소형 동기 강압 컨버터 LMR36015 4.2V~60V, 1.5A 초소형 동기 스텝다운 컨버터 LMR36015-Q1 4.2V~60V, 1.5A 초소형 동기 스텝다운 컨버터
계산 툴

SNVR484 LMR336x0 Component Calculator

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
LMR33620 SIMPLE SWITCHER® 3.8V~36V, 2A 동기 벅 컨버터, 초저 EMI LMR33620-Q1 3.8V~36V, 2A 동기 스텝다운 전압 컨버터 LMR33630 SIMPLE SWITCHER® 3.8V~36V, 3A 동기 벅 컨버터, 초저 EMI LMR33630-Q1 3.8V~36V, 3A 동기 스텝다운 전압 컨버터 LMR33640 SOIC-8 패키지의 SIMPLE SWITCHER® 3.8V~36V, 4A 스텝다운 컨버터 LMR36015 4.2V~60V, 1.5A 초소형 동기 스텝다운 컨버터 LMR36015-Q1 4.2V~60V, 1.5A 초소형 동기 스텝다운 컨버터
레퍼런스 디자인

TIDM-02017 — 2륜 및 3륜 트랙션 인버터 레퍼런스 설계

TIDM-02017은 2륜 및 3륜 애플리케이션용 고성능 및 고효율 트랙션 인버터 시스템 개발을 위한 기반을 제공하고 시장 출시 시간을 단축하는 데 도움이 되는 5kW48V48V 트랙션 인버터 레퍼런스 설계입니다. 이 설계에는 FreeRTOS 실시간 운영 체제 포트와 함께 모터 제어 알고리즘을 독립적으로 실행하는 F28P65x C2000™ 실시간 마이크로컨트롤러가탑재되어 있습니다. 또한 레퍼런스 설계는 높은 게이트 드라이브 강도와 고급 모니터링 및 보호 기능을 지원하는 DRV3255 통합 게이트 드라이버를 제공하여 견고한 인버터 (...)
Design guide: PDF
레퍼런스 디자인

TIDA-050015 — 솔루션 크기 및 저잡음에 최적화된 오토모티브 ADAS 카메라 전원 공급 장치 레퍼런스 설계

이 넓은 입력의 전원 공급 장치 레퍼런스 설계는 공간 제약적인 차량용 ADAS 카메라 애플리케이션을 위해 특별히 설계되었습니다. 크기에 최적화된 이 설계는 프론트 엔드 보호 기능과 넓은 입력 전압 DC/DC 컨버터를 함께 사용하여 오프 배터리 작동을 지원합니다. 엄격한 CISPR 25 클래스 5 전도 EMI(전자기 간섭) 표준을 준수하도록 프론트 엔드 필터를 최적화하고 부품을 선택했습니다.
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN-HR (RNX) 12 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상