主页 微控制器 (MCU) 和处理器 数字信号处理器 (DSP)
主页
微控制器 (MCU) 和处理器
数字信号处理器 (DSP)

TMS320C54V90

正在供货

用于嵌入式 V90 调制解调器解决方案的 DSP（仅 DSP）

立即订购
数据表

TMS320C54V90

正在供货
数据表 立即订购

产品详情

DSP type 1 C54x DSP (max) (MHz) 150 CPU 16-bit Rating Catalog Operating temperature range (°C) to
DSP type 1 C54x DSP (max) (MHz) 150 CPU 16-bit Rating Catalog Operating temperature range (°C) to
LQFP (PGE) 144 484 mm² 22 x 22
  • Provides Two-Chip Modem Solution
  • Data Rates from 300 bps to 56 Kbps
  • Data Modulation Standards
       V.90, V.34, V.32bis, V.32, V.22bis, V.22, V.23,
       V.21 and V.23 reversible (Minitel), Bell 212, Bell 103
  • FAX Capabilities
    • ITU-T V.17, V.29, V.27ter Modulations
    • TIA/EIA 578 Class 1 Interface
  • V.42 or MNP Class 3 and 4 Error Control and V.42bis Compression
  • Caller ID
  • Field-Proven Modem Algorithms Give Highest Performance, Reliability, and Compatibility
  • Non-Volatile EEPROM Configuration Storage
  • Worldwide Telecom Approvals
  • Parallel Phone Support Including Parallel Phone Detection
  • Parallel Phone Exclusion Relay Control
  • Protected Against Surge and Overvoltage on the Telephone Line
  • Parallel Host Port Interface Supports a Variety of Industry Standard Busses
  • Integral Serial Interface (UART)
  • Autobaud on Serial DTE Interface
  • State-of-the-Art Integrated Transformerless Silicon DAA for Phone Line Interconnection
  • Applications
    • Embedded Systems
    • Set-Top Boxes
    • Gaming Consoles
    • Internet Appliances
    • Portable Devices (PDAs, digital cameras)
    • Remote Data Collection, Point-of-Sale
    • Meter Reading, Utility Monitoring
  • 40K x 16-Bit Dual-Access On-Chip RAM
  • 128K x 16-Bit On-Chip ROM
  • On-Chip Peripherals
    • Software-Programmable Wait-State Generator and Programmable Bank Switching
    • On-Chip Phase-Locked Loop (PLL) Clock Generator With Internal Oscillator or External Clock Source
    • Two Multichannel Buffered Serial Ports (McBSPs)
    • Enhanced 8-Bit Parallel Host-Port Interface (HPI8)
  • Power Consumption Control With IDLE1, IDLE2, and IDLE3 Instructions With Power-Down Modes
  • On-Chip Scan-Based Emulation Logic, IEEE Std 1149.1 (JTAG) Boundary Scan Logic
  • 8.5-ns Single-Cycle Fixed-Point Instruction Execution Time (117.96 MIPS) or 17-ns Instruction Execution Time (58.98 MIPS) for 3.3-V Power Supply (1.5-V Core)
  • Available in a 144-Pin Plastic Low-Profile Quad Flatpack (LQFP) (PGE Suffix) and a 144-Pin Ball Grid Array (BGA) (GGU Suffix)

Note: Human Body Model ESD test performance for this product was demonstrated to be ±1.5 kV during product qualification. Industry standard test method used was IEA/JESD22-A114. Adherence to ESD handling precautionary procedures is advised at all times.
All trademarks are the property of their respective owners.
IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.
  • Provides Two-Chip Modem Solution
  • Data Rates from 300 bps to 56 Kbps
  • Data Modulation Standards
       V.90, V.34, V.32bis, V.32, V.22bis, V.22, V.23,
       V.21 and V.23 reversible (Minitel), Bell 212, Bell 103
  • FAX Capabilities
    • ITU-T V.17, V.29, V.27ter Modulations
    • TIA/EIA 578 Class 1 Interface
  • V.42 or MNP Class 3 and 4 Error Control and V.42bis Compression
  • Caller ID
  • Field-Proven Modem Algorithms Give Highest Performance, Reliability, and Compatibility
  • Non-Volatile EEPROM Configuration Storage
  • Worldwide Telecom Approvals
  • Parallel Phone Support Including Parallel Phone Detection
  • Parallel Phone Exclusion Relay Control
  • Protected Against Surge and Overvoltage on the Telephone Line
  • Parallel Host Port Interface Supports a Variety of Industry Standard Busses
  • Integral Serial Interface (UART)
  • Autobaud on Serial DTE Interface
  • State-of-the-Art Integrated Transformerless Silicon DAA for Phone Line Interconnection
  • Applications
    • Embedded Systems
    • Set-Top Boxes
    • Gaming Consoles
    • Internet Appliances
    • Portable Devices (PDAs, digital cameras)
    • Remote Data Collection, Point-of-Sale
    • Meter Reading, Utility Monitoring
  • 40K x 16-Bit Dual-Access On-Chip RAM
  • 128K x 16-Bit On-Chip ROM
  • On-Chip Peripherals
    • Software-Programmable Wait-State Generator and Programmable Bank Switching
    • On-Chip Phase-Locked Loop (PLL) Clock Generator With Internal Oscillator or External Clock Source
    • Two Multichannel Buffered Serial Ports (McBSPs)
    • Enhanced 8-Bit Parallel Host-Port Interface (HPI8)
  • Power Consumption Control With IDLE1, IDLE2, and IDLE3 Instructions With Power-Down Modes
  • On-Chip Scan-Based Emulation Logic, IEEE Std 1149.1 (JTAG) Boundary Scan Logic
  • 8.5-ns Single-Cycle Fixed-Point Instruction Execution Time (117.96 MIPS) or 17-ns Instruction Execution Time (58.98 MIPS) for 3.3-V Power Supply (1.5-V Core)
  • Available in a 144-Pin Plastic Low-Profile Quad Flatpack (LQFP) (PGE Suffix) and a 144-Pin Ball Grid Array (BGA) (GGU Suffix)

Note: Human Body Model ESD test performance for this product was demonstrated to be ±1.5 kV during product qualification. Industry standard test method used was IEA/JESD22-A114. Adherence to ESD handling precautionary procedures is advised at all times.
All trademarks are the property of their respective owners.
IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.

The TMS320C54V90 is used to implement a full-featured, high-performance modem technology, intended for use in embedded systems and similar applications. This highly integrated solution implements a complete modem using only two chips: the TMS320C54V90 DSP with on-chip RAM and ROM, and the Si3016 line-side DAA.

The modem can connect to a host system serially (RS-232 functionality), or as an 8-bit peripheral to the processor in a host system. The TMS320C54V90 uses a standard Digital Signal Processor (DSP) and proprietary firmware to perform all the modem signal processing, the V.42/V.42bis compression, and AT commands interpretation for modem control functions.

The TMS320C54V90 also uses the latest silicon DAA technology. This technology does not require a transformer and results in lower cost, lower power, and a smaller area for the DAA function.

For serial interface applications, an integrated UART implements the serial interface with no additional hardware.

The TMS320C54V90 is used to implement a full-featured, high-performance modem technology, intended for use in embedded systems and similar applications. This highly integrated solution implements a complete modem using only two chips: the TMS320C54V90 DSP with on-chip RAM and ROM, and the Si3016 line-side DAA.

The modem can connect to a host system serially (RS-232 functionality), or as an 8-bit peripheral to the processor in a host system. The TMS320C54V90 uses a standard Digital Signal Processor (DSP) and proprietary firmware to perform all the modem signal processing, the V.42/V.42bis compression, and AT commands interpretation for modem control functions.

The TMS320C54V90 also uses the latest silicon DAA technology. This technology does not require a transformer and results in lower cost, lower power, and a smaller area for the DAA function.

For serial interface applications, an integrated UART implements the serial interface with no additional hardware.
open-in-new 查找其他 数字信号处理器 (DSP)
下载 观看带字幕的视频 视频

TI 不提供设计支持

TI 不会为该产品的新工程（例如新内容或软件更新）提供持续的设计支持。如可用，您将在产品文件夹中找到相关的配套资料、软件和工具。您也可以在 TI E2ETM 支持论坛中搜索已归档的信息。

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索，并重试。
查看全部 3
类型 项目标题 下载最新的英语版本 日期
* 数据表 TMS320C54V90 Embedded V.90 Modem DSP 数据表 (Rev. F) 2003年 10月 31日
应用手册 如何将 CCS 3.x 工程迁移至最新的 Code Composer Studio™ (CCS) (Rev. A) 下载英文版本 (Rev.A) PDF | HTML 2021年 5月 19日
更多文献资料 Embedded v.90 Modem Solution (Rev. B) 2002年 9月 27日

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

评估板

TMDSDSK5416 — TMS320C5416 DSP 入门套件 (DSK)

TMS320C5416 DSP 入门套件 (DSK) 是一个低成本开发平台，旨在加快基于 TI TMS320C54x DSP 的节能型应用的开发速度。该套件提供 USB 通信和真正的即插即用功能等性能增强型新功能，可让初级和熟练的设计人员立刻轻松地开始着手创新产品设计。

C5416 DSK 可以检测、诊断和校正 DSK 通信问题，更快地下载和逐步浏览代码，并利用实时数据交换 (RTDX?) 获得更高的吞吐量。


套件的所有内容包括：

  • C5416 DSP 开发板 -
  • C5416 DSK Code Composer Studio?v2.1 IDE
  • 快速入门指南
  • 技术参考资料
  • (...)
TI.com 上无现货
设计工具

PROCESSORS-3P-SEARCH — 基于 Arm® 的 MPU、基于 Arm 的 MCU 和 DSP 第三方搜索工具

TI 已与多家公司合作，提供各种使用 TI 处理器的软件、工具和 SOM，从而加快您的量产速度。下载此搜索工具，快速浏览我们的第三方解决方案，并寻找合适的第三方来满足您的需求。此处所列的软件、工具和模块由独立的第三方生产和管理，而非德州仪器 (TI)。

搜索工具按产品类型划分为以下类别：

  • 工具包括 IDE/编译器、调试和跟踪、仿真和建模软件以及闪存编程器。
  • 操作系统包括 TI 处理器支持的操作系统。
  • 应用软件是指应用特定的软件，包括在 TI 处理器上运行的中间件和库。
  • SoM 是模块上系统解决方案
下载
封装 引脚数 下载
LQFP (PGE) 144 了解详情
应遵守 TI 的评估模块标准条款与条件.

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

支持与培训

视频