产品详细信息
参数
封装|引脚|尺寸
特性
- Gain Bandwidth Product (GBWP): 220 MHz
- Slew Rate: 500 V/µs
- Bandwidth: 42 MHz (G = 10 V/V)
- Voltage Noise: 4.2 nV/√ Hz
- Supply Current (IQ): 2 mA
- IQ : 28 µA (Shutdown)
- Rail-to-Rail Output (RRO)
- High Impedance CMOS Inputs
- Independent Input and Output Common-Mode Control
- Disable Input Common-Mode Loop to Use as a Standard Fully Differential Amplifier (FDA)
- Single-Supply Range: 3.3 V to 5.5 V
- Split-Supply Range: ±1.65 V to ±2.75 V
- Operating Temperature Range: -40°C to 125°C
All trademarks are the property of their respective owners.
描述
The THS4567 device is a novel fully-differential amplifier (FDA) that includes independent input common-mode (VICM) and output-common mode (VOCM) control. Standard FDAs only possess output common-mode control. The THS4567 is a decompensated amplifier with a minimum stable gain of 10 V/V.
The THS4567 operates as a fully differential transimpedance amplifier (TIA) and analog-to-digital converter (ADC) driver in a single integrated stage.
The VICM loop decouples the reverse bias across the photodiode(PD) from the amplifiers input and output swing compliance ranges thereby allowing the designer to maximize the PD reverse bias and minimize the PD capacitance. The VICM loop can be disabled which then allows the THS4567 to operate as a standard FDA.
The VOCM loop sets the differential output common-mode voltage and is typically set at the subsequent ADC stage common-mode reference voltage.
技术文档
类型 | 标题 | 下载最新的英文版本 | 日期 | |
---|---|---|---|---|
* | 数据表 | THS4567 220 MHz, High Input Impedance, Fully Differential Amplifier with Independent Input and Output Common-Mode Control 数据表 | 2020年 10月 29日 | |
用户指南 | INA2290EVM User's Guide | 2020年 11月 23日 | ||
技术文章 | How to minimize filter loss when you drive an ADC | 2016年 10月 20日 | ||
技术文章 | Go differential to differentiate your precision design | 2016年 8月 11日 | ||
技术文章 | How to use a fully differential amplifier as a level shifter | 2016年 7月 13日 | ||
技术文章 | What you need to know about internal ESD protection on integrated circuits | 2015年 12月 2日 | ||
应用手册 | Noise Analysis for High Speed Op Amps | 2005年 1月 17日 |
设计与开发
有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。硬件开发
说明
特性
- 可配置为双电源供电,也可修改为单电源供电
- 利用可选的二极管输入封装,可针对输入共模控制进行配置
- 可连接终端电阻器,从而匹配标准 50Ω 输入/输出阻抗测试设备
- 输入和输出使用标准 SMA 连接器封装
- 针对高带宽器件优化了布局
设计工具和仿真
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI 器件、了解产品系列、打开测试台并对您的设计进行仿真,从而进一步分析选定的器件。您还可对多个 TI 器件进行联合仿真,以更好地展现您的系统。
除了一个完整的预加载模型库之外,您还可以在 PSPICE-FOR-TI 工具中轻松访问 TI 器件的全新技术资料。在您确认找到适合您应用的器件后,可访问 TI store 购买产品。
借助 PSpice for TI,您可使用合适的工具来满足您在整个设计周期(从电路探索到设计开发和验证)的仿真需求。免费获取、轻松入门。立即下载 PSpice 设计和仿真套件,开始您的设计。
入门
- 申请使用 PSPICE-FOR-TI 仿真器
- 下载并安装
- 观看有关仿真入门的培训
特性
- 利用 Cadence PSpice 技术
- 带有一套数字模型的预装库可在最坏情形下进行时序分析
- 动态更新确保您可以使用全新的器件型号
- 针对仿真速度进行了优化,且不会降低精度
- 支持对多个产品进行同步分析
- 基于 OrCAD Capture 框架,提供对业界广泛使用的原理图捕获和仿真环境的访问权限
- 可离线使用
- 在各种工作条件和器件容许范围内验证设计,包括
- 自动测量和后处理
- Monte Carlo 分析
- 最坏情形分析
- 热分析
CAD/CAE 符号
封装 | 引脚 | 下载 |
---|---|---|
QFN (RUN) | 10 | 了解详情 |
订购与质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/FIT 估算
- 材料成分
- 认证摘要
- 持续可靠性监测