主页 音频 专用音频 IC PWM 调制器
主页
音频
专用音频 IC
PWM 调制器

TAS5508

不推荐用于新设计

8 通道数字音频 PWM 处理器

立即订购
数据表
TAS5508 不推荐用于新设计
虽然我们会继续生产此产品供先前的设计使用，但不推荐在新设计中使用此产品。请考虑从这些替代产品中选择一款：
open-in-new 比较替代产品
功能与比较器件相似
TAS5548 正在供货 具有集成 ASRC 和音频处理器的 96KHz PWM 调制器 8 channel, 96KHz, PWM modulator with integrated ASRC & audio processor

TAS5508

不推荐用于新设计
数据表 立即订购

产品详情

Dynamic range (dB) 102 Operating temperature range (°C) 0 to 70 Rating Catalog
Dynamic range (dB) 102 Operating temperature range (°C) 0 to 70 Rating Catalog
TQFP (PAG) 64 144 mm² 12 x 12
  • General Features
    • Automated Operation With an Easy-to-Use Control Interface
    • I2C Serial-Control Slave Interface
    • Integrated AM Interference-Avoidance Circuitry
    • Single, 3.3-V Power Supply
    • 64-Pin TQFP Package
    • 5-V Tolerant Inputs
  • Audio Input/Output
    • Automatic Master Clock Rate and Data Sample Rate Detection
    • Eight Serial Audio Input Channels
    • Eight PWM Audio Output Channels Configurable as
      Six Channels With Stereo Lineout or Eight channels
    • Line Output is a PWM Output to Drive an External
      Differential-Input Operational Amplifier
    • Headphone PWM Output to Drive an External
      Differential Amplifier Like the TPA112
    • PWM Outputs Support Single-Ended and
      Bridge-Tied Loads
    • 32-, 38-, 44.1-, 48-, 88.2-, 96-, 176.4-, and
      192-kHz Sampling Rates
    • Data Formats: 16-, 20-, or 24-Bit Left-Justified,
      I2S, or Right-Justified Input Data
    • 64-Fs Bit-Clock Rate
    • 128-, 192-, 256-, 384-, 512-, and 768-Fs Master
      Clock Rates (Up to a Maximum of 50 MHz)
  • Audio Processing
    • 48-Bit Processing Architecture With 76 Bits
      of Precision for Most Audio Processing Features
    • Volume Control Range 36 dB to –127 dB
      • Master Volume Control Range of 18 dB
        to –100 dB
      • Eight Individual Channel Volume Control
        Ranges of 18 dB to –127 dB
    • Programmable Soft Volume and Mute Update Rates
    • Four Bass and Treble Tone Controls with
      =18-dB Range, Selectable Corner Frequencies,
      and Second-Order Slopes
      • L, R, and C
      • LS, RS
      • LR, RR
      • Sub
    • Configurable Loudness Compensation
    • Two Dynamic Range Compressors With Two Thresholds,
      Two Offsets, and Three Slopes
    • Seven Biquads Per Channel
    • Full 8 = 8 Input Crossbar Mixer. Each
      Signal-Processing Channel Input Can Be Any
      Ratio of the Eight Input Channels.
    • 8 = 2 Output Mixer – Channels 1–6.
      Each Output Can be Any Ratio of Any Two
      Signal-Processed Channels.
    • 8 = 3 Output Mixer – Channels 7 and 8.
      Each Output Can Be Any Ratio of Any Three
      Signal-Processed Channels.
    • Three Coefficient Sets Stored on the Device
      Can Be Selected Manually or Automatically
      (Based on Specific Data Rates).
    • DC Blocking Filters
    • Able to Support a Variety of Bass
      Management Algorithms
  • PWM Processing
    • 32-Bit Processing PWM Architecture With
      40 Bits of Precision
    • 8= Oversampling With Fifth-Order Noise
      Shaping at 32 kHz–48 kHz, 4=
      Oversampling at 88.2 kHz and 96 kHz, and 2=
      Oversampling at 176.4 kHz and 192 kHz
    • >102-dB Dynamic Range
    • THD+N < 0.1%
    • 20-Hz–20-kHz, Flat Noise Floor for 44.1-, 48-,
      88.2-, 96-, 176.4-, and 192-kHz Data Rates
    • Digital De-Emphasis for 32-, 44.1-, and
      48-kHz Data Rates
    • Flexible Automute Logic With Programmable
      Threshold and Duration for Noise-Free Operation
    • Intelligent AM Interference-Avoidance System
      Provides Clear AM Reception
    • Power-Supply Volume Control (PSVC) Support for
      Enhanced Dynamic Range in High-Performance Applications
    • Adjustable Modulation Limit

PurePath Digital is a trademark of Texas Instruments.
Matlab is a trademark of Math Works, Inc.
All other trademarks are the property of their respective owners.
  • General Features
    • Automated Operation With an Easy-to-Use Control Interface
    • I2C Serial-Control Slave Interface
    • Integrated AM Interference-Avoidance Circuitry
    • Single, 3.3-V Power Supply
    • 64-Pin TQFP Package
    • 5-V Tolerant Inputs
  • Audio Input/Output
    • Automatic Master Clock Rate and Data Sample Rate Detection
    • Eight Serial Audio Input Channels
    • Eight PWM Audio Output Channels Configurable as
      Six Channels With Stereo Lineout or Eight channels
    • Line Output is a PWM Output to Drive an External
      Differential-Input Operational Amplifier
    • Headphone PWM Output to Drive an External
      Differential Amplifier Like the TPA112
    • PWM Outputs Support Single-Ended and
      Bridge-Tied Loads
    • 32-, 38-, 44.1-, 48-, 88.2-, 96-, 176.4-, and
      192-kHz Sampling Rates
    • Data Formats: 16-, 20-, or 24-Bit Left-Justified,
      I2S, or Right-Justified Input Data
    • 64-Fs Bit-Clock Rate
    • 128-, 192-, 256-, 384-, 512-, and 768-Fs Master
      Clock Rates (Up to a Maximum of 50 MHz)
  • Audio Processing
    • 48-Bit Processing Architecture With 76 Bits
      of Precision for Most Audio Processing Features
    • Volume Control Range 36 dB to –127 dB
      • Master Volume Control Range of 18 dB
        to –100 dB
      • Eight Individual Channel Volume Control
        Ranges of 18 dB to –127 dB
    • Programmable Soft Volume and Mute Update Rates
    • Four Bass and Treble Tone Controls with
      =18-dB Range, Selectable Corner Frequencies,
      and Second-Order Slopes
      • L, R, and C
      • LS, RS
      • LR, RR
      • Sub
    • Configurable Loudness Compensation
    • Two Dynamic Range Compressors With Two Thresholds,
      Two Offsets, and Three Slopes
    • Seven Biquads Per Channel
    • Full 8 = 8 Input Crossbar Mixer. Each
      Signal-Processing Channel Input Can Be Any
      Ratio of the Eight Input Channels.
    • 8 = 2 Output Mixer – Channels 1–6.
      Each Output Can be Any Ratio of Any Two
      Signal-Processed Channels.
    • 8 = 3 Output Mixer – Channels 7 and 8.
      Each Output Can Be Any Ratio of Any Three
      Signal-Processed Channels.
    • Three Coefficient Sets Stored on the Device
      Can Be Selected Manually or Automatically
      (Based on Specific Data Rates).
    • DC Blocking Filters
    • Able to Support a Variety of Bass
      Management Algorithms
  • PWM Processing
    • 32-Bit Processing PWM Architecture With
      40 Bits of Precision
    • 8= Oversampling With Fifth-Order Noise
      Shaping at 32 kHz–48 kHz, 4=
      Oversampling at 88.2 kHz and 96 kHz, and 2=
      Oversampling at 176.4 kHz and 192 kHz
    • >102-dB Dynamic Range
    • THD+N < 0.1%
    • 20-Hz–20-kHz, Flat Noise Floor for 44.1-, 48-,
      88.2-, 96-, 176.4-, and 192-kHz Data Rates
    • Digital De-Emphasis for 32-, 44.1-, and
      48-kHz Data Rates
    • Flexible Automute Logic With Programmable
      Threshold and Duration for Noise-Free Operation
    • Intelligent AM Interference-Avoidance System
      Provides Clear AM Reception
    • Power-Supply Volume Control (PSVC) Support for
      Enhanced Dynamic Range in High-Performance Applications
    • Adjustable Modulation Limit

PurePath Digital is a trademark of Texas Instruments.
Matlab is a trademark of Math Works, Inc.
All other trademarks are the property of their respective owners.

The TAS5508 is an 8-channel digital pulse-width modulator (PWM) that provides both advanced performance and a high level of system integration. The TAS5508 is designed to interface seamlessly with most audio digital signal processors. The TAS5508 automatically adjusts control configurations in response to clock and data rate changes and idle conditions. This enables the TAS5508 to provide an easy-to-use control interface with relaxed timing requirements.

The TAS5508 can drive eight channels of H-bridge power stages. Texas Instruments H-bridge parts TAS5111, TAS5112, or TAS5182 with FETs are designed to work seamlessly with the TAS5508. The TAS5508 supports both single-ended or bridge-tied load configurations. The TAS5508 also provides a high-performance, differential output to drive an external, differential-input, analog headphone amplifier (such as the TPA112).

The TAS5508 uses AD modulation operating at a 384-kHz switching rate for 48-, 96-, and
192-kHz data. The 8= oversampling combined with the fifth-order noise shaper provides a broad, flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

The TAS5508 is a clocked slave-only device. The TAS5508 receives MCLK, SCLK, and LRCLK from other system components. The TAS5508 accepts master clock rates of 128, 192, 256, 384, 512, and 768 Fs. The TAS5508 accepts a 64-Fs bit clock.

The TAS5508 allows for extending the dynamic range by providing a power-supply volume control (PSVC) output signal.

The TAS5508 is an 8-channel digital pulse-width modulator (PWM) that provides both advanced performance and a high level of system integration. The TAS5508 is designed to interface seamlessly with most audio digital signal processors. The TAS5508 automatically adjusts control configurations in response to clock and data rate changes and idle conditions. This enables the TAS5508 to provide an easy-to-use control interface with relaxed timing requirements.

The TAS5508 can drive eight channels of H-bridge power stages. Texas Instruments H-bridge parts TAS5111, TAS5112, or TAS5182 with FETs are designed to work seamlessly with the TAS5508. The TAS5508 supports both single-ended or bridge-tied load configurations. The TAS5508 also provides a high-performance, differential output to drive an external, differential-input, analog headphone amplifier (such as the TPA112).

The TAS5508 uses AD modulation operating at a 384-kHz switching rate for 48-, 96-, and
192-kHz data. The 8= oversampling combined with the fifth-order noise shaper provides a broad, flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

The TAS5508 is a clocked slave-only device. The TAS5508 receives MCLK, SCLK, and LRCLK from other system components. The TAS5508 accepts master clock rates of 128, 192, 256, 384, 512, and 768 Fs. The TAS5508 accepts a 64-Fs bit clock.

The TAS5508 allows for extending the dynamic range by providing a power-supply volume control (PSVC) output signal.
open-in-new 查找其他 PWM 调制器
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 8
类型 标题 下载最新的英语版本 日期
* 数据表 8 Channel Digital Audio PWM Processor 数据表 (Rev. D) 2009年 7月 6日
EVM 用户指南 TAS5508-5121K8EVM User's Guide (Rev. B) 2007年 11月 28日
EVM 用户指南 TAS5508-5122C6EVM User's Guide (Rev. A) 2006年 4月 26日
应用手册 PSRR for Purepath Digital Audio Amplifiers 2005年 4月 15日
应用手册 Click and Pop Measurement Technique 2005年 4月 1日
EVM 用户指南 TAS5508-5122C6EVM User's Guide 2004年 9月 10日
应用手册 PurePath Digital AM Interference Avoidance 2004年 8月 24日
应用手册 Implementation of Power Supply Volume Control 2004年 6月 23日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 下载
TQFP (PAG) 64 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频