主页 音频、触觉与压电 音频转换器 音频编解码器
主页
音频、触觉与压电
音频转换器
音频编解码器

PCM2912A

正在供货

具有 USB 接口、单声道麦克风输入和立体声耳机输出的音频编解码器

立即订购
数据表
勘误

PCM2912A

正在供货
数据表 立即订购

产品详情

Number of ADC channels 1 Number of DAC channels 2 Control interface H/W Analog inputs 1 Analog outputs 2 Features Mic bias, PGAs, Sidetone, USB interface Sampling rate (max) (kHz) 48 Rating Catalog Operating temperature range (°C) -25 to 85
Number of ADC channels 1 Number of DAC channels 2 Control interface H/W Analog inputs 1 Analog outputs 2 Features Mic bias, PGAs, Sidetone, USB interface Sampling rate (max) (kHz) 48 Rating Catalog Operating temperature range (°C) -25 to 85
TQFP (PJT) 32 81 mm² 9 x 9
  • On-Chip USB Interface:
    • With Full-Speed Transceivers
    • Fully Compliant With USB 2.0 Specification
    • Certified By USB-IF
    • Partially Programmable Descriptors
    • Adaptive Isochronous Transfer for Playback
    • Asynchronous-Isochronous Transfer for
      Record
    • Bus Powered
  • 16-Bit Delta-Sigma ADC and DAC
  • Sampling Rate:
    • 8, 11.025, 16, 22.05, 32, 44.1, or 48 kHz
  • On-Chip Clock Generator:
    • With Single 6-MHz Clock Source
  • Mono ADC with Microphone Input
    • Analog Performance at VBUS = 5 V:
      • THD+N: 0.01%
      • SNR: 92 dB
      • Dynamic Range: 90 dB
    • Decimation Digital Filter
      • Passband Ripple: ±0.05 dB
      • Stop-Band Attenuation: –65 dB
    • Single-Ended Voltage Input
    • Antialiasing Filter Included
    • Digital HPF Included
    • Microphone Bias, Microphone Amplifier, and
      Input PGA
  • Stereo DAC With Headphone Output
    • Analog Performance at VBUS = 5.0 V:
      • THD+N: 0.01% (RL > 10 kΩ)
      • THD+N: 0.02% (RL = 32 Ω)
      • SNR: 92 dB
      • Dynamic Range: 90 dB
      • PO: 13 mW (RL = 32 Ω)
      • PO: 25 mW (RL = 16 Ω)
    • Oversampling Digital Filter
      • Passband Ripple: ±0.1 dB
      • Stop-Band Attenuation: –43 dB
      • Single-Ended Voltage Output
      • Analog LPF Included
      • Sidetone PGA, Output PGA, and HP
        Amplifier
  • Multifunctions:
    • Suspend, Playback, and Record Status Flag
    • Microphone Amplifier, Mute, and Gain Control
  • Pop/Click Noise-Free
  • Single Power-Supply: 5 V Typical (VBUS)
  • Package: 32-Pin TQFP
  • On-Chip USB Interface:
    • With Full-Speed Transceivers
    • Fully Compliant With USB 2.0 Specification
    • Certified By USB-IF
    • Partially Programmable Descriptors
    • Adaptive Isochronous Transfer for Playback
    • Asynchronous-Isochronous Transfer for
      Record
    • Bus Powered
  • 16-Bit Delta-Sigma ADC and DAC
  • Sampling Rate:
    • 8, 11.025, 16, 22.05, 32, 44.1, or 48 kHz
  • On-Chip Clock Generator:
    • With Single 6-MHz Clock Source
  • Mono ADC with Microphone Input
    • Analog Performance at VBUS = 5 V:
      • THD+N: 0.01%
      • SNR: 92 dB
      • Dynamic Range: 90 dB
    • Decimation Digital Filter
      • Passband Ripple: ±0.05 dB
      • Stop-Band Attenuation: –65 dB
    • Single-Ended Voltage Input
    • Antialiasing Filter Included
    • Digital HPF Included
    • Microphone Bias, Microphone Amplifier, and
      Input PGA
  • Stereo DAC With Headphone Output
    • Analog Performance at VBUS = 5.0 V:
      • THD+N: 0.01% (RL > 10 kΩ)
      • THD+N: 0.02% (RL = 32 Ω)
      • SNR: 92 dB
      • Dynamic Range: 90 dB
      • PO: 13 mW (RL = 32 Ω)
      • PO: 25 mW (RL = 16 Ω)
    • Oversampling Digital Filter
      • Passband Ripple: ±0.1 dB
      • Stop-Band Attenuation: –43 dB
      • Single-Ended Voltage Output
      • Analog LPF Included
      • Sidetone PGA, Output PGA, and HP
        Amplifier
  • Multifunctions:
    • Suspend, Playback, and Record Status Flag
    • Microphone Amplifier, Mute, and Gain Control
  • Pop/Click Noise-Free
  • Single Power-Supply: 5 V Typical (VBUS)
  • Package: 32-Pin TQFP

The PCM2912A is the Texas Instruments single-chip, USB stereo audio codec with a USB, 2.0-compliant, full-speed protocol controller and an analog front-end (AFE) function for headset applications.

The USB protocol controller works with no software code, but USB descriptors can be modified on request. The PCM2912A employs SpAct™ architecture, TI’s unique system that recovers the audio clock from USB packet data. On-chip analog PLLs with SpAct enables independent playback and record sampling rates with low clock jitters.

The PCM2912A is the Texas Instruments single-chip, USB stereo audio codec with a USB, 2.0-compliant, full-speed protocol controller and an analog front-end (AFE) function for headset applications.

The USB protocol controller works with no software code, but USB descriptors can be modified on request. The PCM2912A employs SpAct™ architecture, TI’s unique system that recovers the audio clock from USB packet data. On-chip analog PLLs with SpAct enables independent playback and record sampling rates with low clock jitters.
filter 查找其他 音频编解码器
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 6
类型 标题 下载最新的英语版本 日期
* 数据表 PCM2912A Audio Codec With USB Interface, Mono Microphone Input and Stereo Headphone Output 数据表 (Rev. A) PDF | HTML 2015年 8月 25日
* 勘误表 Application Information for Difference Between PCM2912A and PCM2912 2008年 11月 25日
EVM 用户指南 DEM-PCM2912A 评估模块 (Rev. A) PDF | HTML 英语版 (Rev.A) PDF | HTML 2024年 4月 24日
应用手册 Operating Environments for PCM2912A Applications (Rev. A) 2016年 11月 10日
应用手册 Solving Enumeration Errors in USB Audio DAC and CODEC Designs 2009年 10月 30日
应用手册 所选封装材料的热学和电学性质 2008年 10月 16日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

DEM-PCM2912AEVM — DEM-PCM2912AEVM 评估模块

DEM-PCM2912A EVM 是一款完整的评估平台，适用于具有 USB 接口的 16 位单声道麦克风输入和立体声耳机输出 PCM2912A 总线供电音频编解码器。所有必要的连接器和电路一应俱全，可以对接音频测试系统和商用音频设备。

DEM-PCM2912A EVM 上装有一个 USB 连接器。两个立体声微型插孔提供立体声音频输出和单声道音频输入功能。PCM2912A 是一款音频编解码器，具有适用于 USB 耳麦、USB 耳机和 USB 音频接口盒的 USB 接口，它集成有单声道输入、立体声耳机输出、模拟环回线路、可编程增益放大器 (PGA) 和麦克风偏置。它可采用 32 引脚 TQFP (...)

用户指南: PDF | HTML
英语版 (Rev.A): PDF | HTML
TI.com 上无现货
模拟工具

PSPICE-FOR-TI — PSpice® for TI 设计和仿真工具

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。 

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 CAD 符号、封装和 3D 模型
TQFP (PJT) 32 Ultra Librarian
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

视频