主页 接口 LVDS、M-LVDS 和 PECL IC
主页
接口
LVDS、M-LVDS 和 PECL IC

EQ50F100

已停产

1Gbps 至 6.25Gbps 背板均衡器

立即订购
数据表

EQ50F100

已停产
数据表 立即订购

产品详情

Function Equalizer Protocols CML Number of transmitters 1 Number of receivers 1 Supply voltage (V) 1.8 Signaling rate (Mbps) 6250 Input signal CML Output signal CML Rating Catalog Operating temperature range (°C) -40 to 85
Function Equalizer Protocols CML Number of transmitters 1 Number of receivers 1 Supply voltage (V) 1.8 Signaling rate (Mbps) 6250 Input signal CML Output signal CML Rating Catalog Operating temperature range (°C) -40 to 85
WSON (NGG) 6 9 mm² 3 x 3
  • Recovers 6.25 Gbps signals after 30" of FR4
  • Single 1.8V power supply
  • Low power consumption: 85mW
  • Equalize up to 20dB loss at 2.5 GHz
  • 35 ps residual deterministic jitter at 5 Gbps
  • On-chip CML terminations
  • Small 3 mm x 3 mm 6-pin leadless LLP package
  • Recovers 6.25 Gbps signals after 30" of FR4
  • Single 1.8V power supply
  • Low power consumption: 85mW
  • Equalize up to 20dB loss at 2.5 GHz
  • 35 ps residual deterministic jitter at 5 Gbps
  • On-chip CML terminations
  • Small 3 mm x 3 mm 6-pin leadless LLP package

The EQ50F100 is a equalizer designed to compensate transmission medium losses and reduce the medium-induced deterministic jitter. It is optimized for operation from 1Gbps to 6.25Gbps, on printed circuit backplane for up to 30" of FR4 striplines with backplane connectors at both ends. It is code independent, and functioning equally well for short run length, balanced codes such as 8b/10b, commonly used in multiplexed 1.25 Gbps Ethernet Systems.

The equalizer uses differential CML inputs and outputs with feed-through pin-outs, mounted in a 3 mm x 3 mm 6-pin leadless LLP package. It is powered from single 1.8V supply and consumes 85 mW.

The EQ50F100 is a equalizer designed to compensate transmission medium losses and reduce the medium-induced deterministic jitter. It is optimized for operation from 1Gbps to 6.25Gbps, on printed circuit backplane for up to 30" of FR4 striplines with backplane connectors at both ends. It is code independent, and functioning equally well for short run length, balanced codes such as 8b/10b, commonly used in multiplexed 1.25 Gbps Ethernet Systems.

The equalizer uses differential CML inputs and outputs with feed-through pin-outs, mounted in a 3 mm x 3 mm 6-pin leadless LLP package. It is powered from single 1.8V supply and consumes 85 mW.
filter 查找其他 LVDS、M-LVDS 和 PECL IC
下载

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 1
类型 标题 下载最新的英语版本 日期
* 数据表 EQ50F100 1Gbps - 6.25 Gbps Backplane Equalizer 数据表 (Rev. D) 2005年 4月 14日

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点