2.35V-5.25V 10 位 1.25MSPS 串行 ADC
产品详细信息
参数
封装|引脚|尺寸
特性
- 1.25-MHz Sample Rate Serial Device
- 10-Bit Resolution (ADS7887)
- 8-Bit Resolution (ADS7888)
- Zero Latency
- 25-MHz Serial Interface
- Supply Range: 2.35 V to 5.25 V
- Typical Power Dissipation at 1.25 MSPS:
- 3.8 mW at 3-V VDD
- 8 mw at 5-V VDD
- ±0.35 LSB INL, DNL (ADS7887)
- ±0.15 LSB INL, ±0.1 LSB DNL (ADS7888)
- 61 dB SINAD, –84 dB THD (ADS7887)
- 49.5 dB SINAD, –67.5 dB THD (ADS7888)
- Unipolar Input Range: 0 V to VDD
- Power-Down Current: 1 µA
- Wide Input Bandwidth: 15 MHz at 3 dB
- 6-Pin SOT23 and SC70 Packages
All trademarks are the property of their respective owners.
描述
The ADS7887 device is a 10-bit, 1.25-MSPS, analog-to-digital converter (ADC), and the ADS7888 device is a 8-bit, 1.25-MSPS ADC. These devices include a capacitor-based SAR A/D converter with inherent sample and hold. The serial interface in each device is controlled by the CS and SCLK signals for glueless connections with microprocessors and DSPs. The input signal is sampled with the falling edge of CS, and SCLK is used for conversion and serial data output.
The devices operate from a wide supply range from 2.35 V to 5.25 V. The low power consumption of the devices make them suitable for battery-powered applications. The devices also include a power-saving, power-down feature for when the devices are operated at lower conversion speeds.
The high level of the digital input to the device is not limited to device VDD. This means the digital input can go as high as 5.25 V when device supply is 2.35 V. This feature is useful when digital signals are coming from other circuit with different supply levels. Also this relaxes restriction on power-up sequencing.
The ADS7887 and ADS7888 are available in 6-pin SOT-23 and SC70 packages and are specified for operation from –40°C to 125°C.
技术文档
类型 | 标题 | 下载最新的英文版本 | 日期 | |
---|---|---|---|---|
* | 数据表 | ADS788x 10-Bit, 8-Bit, 1.25-MSPS, Micro-Power, Miniature SAR Analog-to-Digital Converters 数据表 | 2016年 8月 24日 | |
电子书 | Best of Baker's Best: Precision Data Converters -- SAR ADCs | 2015年 5月 21日 | ||
应用手册 | Determining Minimum Acquisition Times for SAR ADCs, part 2 | 2011年 3月 17日 | ||
应用手册 | Determining Minimum Acquisition Times for SAR ADCs | 2010年 11月 10日 | ||
应用手册 | 所选封装材料的热学和电学性质 | 2008年 10月 16日 | ||
应用手册 | 模数规格和性能特性术语表 (Rev. A) | 下载最新的英文版本 (Rev.B) | 2008年 10月 16日 | |
应用手册 | 高速数据转换 | 下载英文版本 | 2008年 10月 16日 | |
用户指南 | ADS788xEVM Users Guide | 2008年 8月 28日 |
设计与开发
有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。设计工具和仿真
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI 器件、了解产品系列、打开测试台并对您的设计进行仿真,从而进一步分析选定的器件。您还可对多个 TI 器件进行联合仿真,以更好地展现您的系统。
除了一个完整的预加载模型库之外,您还可以在 PSPICE-FOR-TI 工具中轻松访问 TI 器件的全新技术资料。在您确认找到适合您应用的器件后,可访问 TI store 购买产品。
借助 PSpice for TI,您可使用合适的工具来满足您在整个设计周期(从电路探索到设计开发和验证)的仿真需求。免费获取、轻松入门。立即下载 PSpice 设计和仿真套件,开始您的设计。
入门
- 申请使用 PSPICE-FOR-TI 仿真器
- 下载并安装
- 观看有关仿真入门的培训
特性
- 利用 Cadence PSpice 技术
- 带有一套数字模型的预装库可在最坏情形下进行时序分析
- 动态更新确保您可以使用全新的器件型号
- 针对仿真速度进行了优化,且不会降低精度
- 支持对多个产品进行同步分析
- 基于 OrCAD Capture 框架,提供对业界广泛使用的原理图捕获和仿真环境的访问权限
- 可离线使用
- 在各种工作条件和器件容许范围内验证设计,包括
- 自动测量和后处理
- Monte Carlo 分析
- 最坏情形分析
- 热分析
特性
- 通过模数转换器 (ADC) 和数模转换器 (DAC) 加快电路设计
- 噪声计算
- 常见单位转换
- 解决常见的放大器电路设计问题
- 使用标准电阻器进行增益选择
- 滤波器配置
- 常见放大器配置的总噪声
- 执行 PCB 寄生计算(例如 R、L 和 C)
- 查找常见传感器的传感器输出值(例如 RTD、热电偶)
- 解决常见无源电路问题(例如使用无源组件的分压器)
CAD/CAE 符号
封装 | 引脚 | 下载 |
---|---|---|
SC70 (DCK) | 6 | 了解详情 |
SOT-23 (DBV) | 6 | 了解详情 |
订购与质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/FIT 估算
- 材料成分
- 认证摘要
- 持续可靠性监测
推荐产品的参数、评估模块或参考设计可能与此 TI 产品相关